John Thomas T-3030T User manual

ITEM NO.: T-3030T, T-3042T, T-3048T, T-3636T, T-4242T AND T-330T, T-336T,
T-342T OR T-18S, T-30S, T-36S, T-42S
REVISED AUG 23, 2016
Printed in Vietnam
THIS ITEM IS PACKED IN 2 CARTONS
- 1 -
ASSEMBLY INSTRUCTIONS
T-3030T, T-3042T, T-3048T, T-3636T, T-4242T/T-330T, T-336T, T-342T
T-3030T, T-3042T, T-3048T, T-3636T, T-4242T / T-18S, T-30S, T-36S, T-42S
T-3030/T-3030GS, T-3636S/T-3636GS, T-3048S/ T-3048GS
Description : FIXED TOP TABLE
Item No : T-3030T, T-3042T, T-3048T, T-3636T, T-4242T AND
T-330T, T-336T, T-342T OR T-18S, T-30S, T-36S, T-42S
T-3030 / T-3030GS, T-3636S / T-3636GS, T-3048S / T-3048GS
“PACKED IN SEPARATE BOX”

ITEM NO.: T-3030T, T-3042T, T-3048T, T-3636T, T-4242T AND T-330T, T-336T,
T-342T OR T-18S, T-30S, T-36S, T-42S
REVISED AUG 23, 2016
Printed in Vietnam
THIS ITEM IS PACKED IN 2 CARTONS
- 2 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and
constructed for durability. All parts were checked prior to packaging to insure quality. Prior to
beginning assembly, however, make sure all parts and hardware are included and free of obvious
defect. If a part is missing or defective, please contact the store where purchased. If hardware is
missing, or you need help with assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the
parts from being scratched.
-Remove all wrapping material, including staples & packing straps before you start to assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
WARNING:
Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish
of your table. Protect the surface of the table with cloth if you are using any product with
rubber feet or base.

ITEM NO.: T-3030T, T-3042T, T-3048T, T-3636T, T-4242T AND T-330T, T-336T,
T-342T OR T-18S, T-30S, T-36S, T-42S
REVISED AUG 23, 2016
Printed in Vietnam
THIS ITEM IS PACKED IN 2 CARTONS
- 3 -
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
A
Table top
1
PART LIST T-18S, T-30S, T-36S, T-42S
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
B
Shaker legs
4
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
B
Turned legs
4
44
RT
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NOTE: HARDWARE IS PACKED IN CARTON OF LEGS T-330T, T-336T, T-342T OR T-18S, T-30S, T-36S, T-42T.
PART LIST T-3030T, T-3042T, T-3048T, T-3636T, T-4242T
OR PART LIST T-330T, T-336T, T-342T
HARDWARE LIST
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Hexagon nut
(M8 x 13mm)
8
3
Lock washer
(8.5 x 13mm)
8
2
Flat washer
(2 x 8.5 x 22mm)
8
4
Wrench
(13mm)
1

ITEM NO.: T-3030T, T-3042T, T-3048T, T-3636T, T-4242T AND T-330T, T-336T,
T-342T OR T-18S, T-30S, T-36S, T-42S
REVISED AUG 23, 2016
Printed in Vietnam
THIS ITEM IS PACKED IN 2 CARTONS
- 4 -
Attach legs (B) to top (A) with washers (2), and (3) and nuts (1) as shown below. Tighten with the wrench (4).
STEP 1