Juniper AX411 User manual

AX411 Access Point Connection Overview
To establish a wireless LAN using AX411 Access Points, you connect the access point
to the SRX Series device and to a power source, as shown in Figure 1.
Figure 1: AX411 Access Point Basic Connections
g033103
Omit power supply if
connecting access point
to Power over Ethernet
(PoE) port.
Table 1 describes the connections.
Table 1: AX411 Access Point Basic Connections
For More InformationConnection
Installing the AX411 Access Point Antennas
Connecting External Antennas to the AX411 Access Point
Access point antennas
Connecting the AX411 Access Point to the SRX Series
Device
Ethernet connection to SRX
Series device
AX411 Access Point Connection Overview ■1

Table 1: AX411 Access Point Basic Connections (continued)
For More InformationConnection
Providing Power to the AX411 Access Point Using Power
over Ethernet
Providing Power to the AX411 Access Point Using the
Power Supply
Powering On and Powering Off the AX411 Access point
Connection to a power source
Related Topics ■Installing the AX411 Access Point Antennas
■Connecting the AX411 Access Point to the SRX Series Device
■Providing Power to the AX411 Access Point Using Power over Ethernet
■Providing Power to the AX411 Access Point Using the Power Supply
Published: 2010-03-16
2■AX411 Access Point Connection Overview