Juniper Mist AP33 User manual

1
AP33 or AP32 Hardware Installation Guide
Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved
AP33 and AP32 Hardware Installation Guide
Overview
The Mist AP33 and AP32 contains three IEEE 802.11ax radios that deliver up
to 4x4 MIMO with four spatial streams when operating in multi-user (MU) or
single-user (SU) mode.

2
AP33 or AP32 Hardware Installation Guide
Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved
I/O ports
Reset Reset to the factory default settings
USB USB2.0 support interface
Eth1 10/100/1000BASE-T RJ45 interface
Eth0+PoE 100/1000/2500BASE-T RJ45 interface that supports
802.3at PoE PD

3
AP33 or AP32 Hardware Installation Guide
Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved
AP33/32 Mounting
In a wall mount installation, please use screws that have a 1/4in. (6.3mm) diameter head with a
length at least 2 in. (50.8mm).

4
AP33 or AP32 Hardware Installation Guide
Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved

5
AP33 or AP32 Hardware Installation Guide
Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved

6
AP33 or AP32 Hardware Installation Guide
Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved

7
AP33 or AP32 Hardware Installation Guide
Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved

8
AP33 or AP32 Hardware Installation Guide
Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved
The bracket attaches to a rod that is 5/8”-11.
The bracket attaches to a rod that is M16-2.

9
AP33 or AP32 Hardware Installation Guide
Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved

10
AP33 or AP32 Hardware Installation Guide
Juniper Networks, Inc. (C) Copyright 2020. All Rights Reserved
Technical Specifications:
Feature Description
Power options 802.3at/802.3af PoE
Dimensions 202mm x 202mm x 44mm (7.95in x 7.95in x 1.73in)
Weight
AP33: 0.88 kg (1.94 lbs)
AP32: 0.79 kg (1.74 lbs)
AP32E: 0.81 kg (1.78 lbs)
Operating
temperature
AP33: -5° to 40° C
AP32: -5° to 40° C
AP32E: -5° to 40° C
Operating humidity 10% to 90% maximum relative humidity, non-condensing
Operating altitude 3,048m (10,000 ft)
I/O
1 – 100/1000/2500BASE-T auto-sensing RJ-45 with PoE
1 – 10/100/1000BASE-T auto-sensing RJ-45
1 – USB2.0
RF
5GHz - 4x4:4SS 802.11ax MU-MIMO & SU-MIMO
2.4GHz – 2x2:2SS 802.11ax MU-MIMO & SU-MIMO
2.4GHz / 5GHz scanning radio
AP33 - 2.4GHz BLE with Dynamic Antenna Array
AP32/AP32E - 2.4GHz BLE with Omni Antenna
Maximum PHY rate
Total maximum PHY rate – 2974 Mbps
5GHz – 2400 Mbps
2.4GHz – 574Mbps
Indicators Multi-color status LED
Compliance standards
CAN/CSA-C22.2 No. 62368-1-14
UL 2043
FCC Part 15.247, 15.407, 15.107, and 15.109
RSS-247
ICES-003 (Canada)
Suitable for use in environmental air space in accordance with Section 300-22(C) of the
National Electrical Code, and Sections 2-128, 12-010(3), and 12-100 of the Canadian
Electrical Code, Part 1, CSA C22.1.
Warning: The AP must be mounted only horizontally if you mount it into a plenum space.