JWA Hesdin 71409 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
Hesdin
ITEM CODE:71409
Lamp Table

Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2.Take care when lifting. Product should be assembled as near as possible to the
point of use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
7.Assembly is to be carried out by a competent adult(s) ONLY
8.During assembly, children should be kept away from the product due to possible
risk to injury.
9.Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.
2
PRE-ASSEMBLY PREPARATION
Allow 30 min For 1 person

3
PARTS LIST
①Table Frame
②Table Handle
③Table Top

•Insert bolt A into flat washer B to connect A with Table
Frame ①.Loosely tighten for now.
4
STEP 1:
•Put the Table Top ③up the Table Frame ①.
•Insert bolt A into the Table Handle ②and turn the Table
Handle ②to connect the handle with the Frame ①
.Loosely tighten for now.
STEP 2:
①
②
③
①

5
STEP 3:
•Stand the table, top side up. Place in on a level surface.
Adjust the legs until the table is level. Now go around
and firmly tighten all the bolts.
ASSEMBLY OF THE LAMP TABLE IS COMPLETE