Kamoer LLS Plus User manual

LLS Plus Peristaltic Pump
User Manual
Version: A/0
KAMOER fluid tech (shanghai) Co.,Ltd.
www.kamoer.com

LLS Plus Peristaltic Pump User Manual
2
Contents
CONTENTS.............................................................................................................................................. 2
WARRANTY.............................................................................................................................................3
NOTICE.....................................................................................................................................................4
1. GETTING START............................................................................................................................... 5
1.1 ABOUT............................................................................................................................................... 5
1.2 UNPACKING.........................................................................................................................................5
1.3 COMPONENTS......................................................................................................................................6
2. OPERATION........................................................................................................................................7
2.1 POWERING ON.................................................................................................................................... 7
2.2 MAIN MENU.......................................................................................................................................7
2.2.1 Run.......................................................................................................................................... 8
2.2.2 Allocate Parameters............................................................................................................. 9
2.2.3 Maintenance........................................................................................................................ 10
2.2.4 Settings.................................................................................................................................12
3. MAINTENANCE................................................................................................................................ 14
3.1 CHEMICAL COMPATIBILITY................................................................................................................... 14
3.2 STORING PUMP................................................................................................................................. 14
4. TECHNICAL SUPPORT.................................................................................................................. 14
APPENDIXES........................................................................................................................................15
APPENDIX A TECHNICAL SPECIFICATIONS...................................................................................................... 15
APPENDIX B PACKING LIST......................................................................................................................... 15

LLS Plus Peristaltic Pump User Manual
3
Warranty
We warrant your product against any defect in material and workmanship, under normal
use. In the event a product is found to be defective within the warranty period of One
year, we will, at our option, repair or replace the defective product. The warranty period
starts at the day of purchase. For warranty validation, a proof of purchase must be
furnished.
The following are excluded from the warranty:
1．Improper use of the device causing malfunction;
2．The device is repaired or modified by an unauthorized person;
3．Use of materials i.e. pump tubes, which are not produced by our company;
4．Damage by disaster;
5．Improper maintenance causing damage;
6．Use of reagent or sample causing corrosion;
7．Damage by accident or over load;
8．Consumables, such as silicone tube and fuse etc.
To obtain warranty support, you may contact our local technical support. Our technical
support will attempt to diagnose and correct the problem. If the problem cannot be
rectified, our technical support will ask you to return the product. You will be asked to
furnish proof of purchase to confirm that the product is still under warranty.
Kamoer text and icon are the registered trademark of KAMOER fluid tech (shanghai)
Co.,Ltd. We reserve the right to improve or alter appearance and technical specifications
without notice.

LLS Plus Peristaltic Pump User Manual
4
Notice
We have considered the safety of the user in the process of design of the instrument.
Please read the manual carefully for installing and use of the instrument. Any improper
operation may cause damage or danger.
1. Safety
The product belongs to Active Products. The Operator should follow the
regulation rules to avoid danger.
If you find any visible damage, please do not switch on;
Be sure not to add any acid, alkali, or volatile solvents;
Be sure not to use in humid environment, avoid damage by short circuit.
Temperature changes or mechanical wear may cause the increases in the dispensed
volume.
2. Defect and anomalous situation
You must stop any operation immediately if the equipment is damaged. The equipment
may be damaged when the following situation occurs:
There is visual damage.
The product suddenly does not work.
The product is located in an inappropriate position.

LLS Plus Peristaltic Pump User Manual
5
1. Getting Start
1.1 About
Kamoer LLS Plus Peristaltic Pump is a kind of low flow and high precision stepper
peristaltic pump. It can be used in workshops, as well as measuring rooms and
laboratories. It has follow advantages:
High precision with stepper motor driver.
128x64 LCD for display.
Membrane keys for operation.
Easy to wire with AC/DC power adapter.
1.2 Unpacking
Before unpacking, please check for damage by delivery.
Upon opening the package, please check that you have received all parts before
using. The parts list is shown in Appendix B - Packing List.Please check whether
the product has visible damage.
If any defects are found when unpacking, please contact us immediately.

LLS Plus Peristaltic Pump User Manual
6
1.3 Components
The master control unit has a backlit LCD screen for display and membrane keys for
operation. The control panel has four keys, from left to right, these are: Up key, Down
key, Set key and Esc key. Below is the function of keys.
Up key: Change the menu selection upward or increase the number.
Down key: Change the menu selection downward or decrease the number.
Set key: Enter next menu or confirm choices.
Esc key: Back to previous menu or cancel choices.
Up Down Set Esc
Pump Tube
The standard configuration of the pump tube is silicone tube. You can choose other
material tube according to actual usage.
kamoer Connector
Kamoer connector is used to connecting the input or output of pump to the connecting
pipe. It is an optional component, for detail information, please visits www.kamoer.com.

LLS Plus Peristaltic Pump User Manual
7
2. Operation
2.1 Powering On
First place the pump on a smooth horizontal surface, then plug the power cord into the
AC-connector of LLS Plus Peristaltic Pump and connect the cord to the main power
supply. After the pump initializes, the LCD display will show the initial display. See figure
2.1 - the first line shows the model and the second line shows the version of product.
Figure 2.1
After 2 seconds of the initial display, the dosing pump enters the run page. In order to
understand the menus, please see menu flowchart in figure 2.2.
Figure 2.2
2.2 Main Menu
If you are in run page, Press Set key to enter main menu page. Figure 2.3 shows main
menu page.

LLS Plus Peristaltic Pump User Manual
8
Figure 2.3
2.2.1Run
In main menu page, press Esc key to return run page. Run mode includes Flow Mode
and Allocation Mode.
Figure 2.4 shows Flow Mode.
Figure 2.4
The first line shows current flow.
The second line shows run time on left, and shows motor real-time rotate speed per
minute on right.
The third line shows current volume.
The three icons on the right of the fourth line shows run mode, run direction, run status in
turn.
Figure 2.5 shows Allocation Mode.
Figure 2.5
The first line shows allocation volume on left, and shows allocation times on right.
The second line shows run countdown time on left, and shows motor real-time rotate

LLS Plus Peristaltic Pump User Manual
9
speed per minute on right.
The third line shows current volume.
The three icons on the right of the fourth line shows run mode, run direction, run status in
turn.
Press Up or Down key to switch item and the chosen item will be with inverse color. Press
Set Key to change run mode, run direction and run status. Changing current flow in flow
mode is allowable.
After setting mode, press SET key to start running while pump is idle. While pump is
running, press SET key to stop running.
2.2.2Allocate Parameters
In main menu page, press Up or Down key to select 1 Allocate Param and press Set key
to enter allocate parameters set page. See as Figure 2.6.
Figure 2.6
Allocation set includes allocation volume, allocation times, allocation flow and interval time.
Allocation volume is the volume of pump running once. After you setting allocation flow,
the system will calculate the running time automatic. Interval time is the dwell time every
two times.
In allocation set page, press Up or Down key to select 1 Vol. and press Set key to enter
allocation volume set page. See as Figure 2.7.
Figure 2.7
Press Up or Down key once to increase or decrease one unit of volume, Long press Up

LLS Plus Peristaltic Pump User Manual
10
or Down key to increase or decrease volume quickly. After you set the volume, press Set
key to confirm, and allocation volume is the new value. If you press Esc key, the system
will cancel the change and use the last value also.
In allocation set page, press Up or Down key to select 2 Times and press Set key to enter
allocation times set page. See as Figure 2.8. Please refer to the setting of allocation
volume to set.
Figure 2.8
In allocation set page, press Up or Down key to select 3 Flow and press Set key to enter
allocation flow set page. See as Figure 2.9. Please refer to the setting of allocation volume
to set.
Figure 2.9
In allocation set page, press Up or Down key to select 4 Interval and press Set key to
enter interval time set page. See as Figure 2.10. Please refer to the setting of allocation
volume to set.
Figure 2.10
2.2.3Maintenance
In main menu page, press Up or Down key to select 3 Maintenance and press Set key

LLS Plus Peristaltic Pump User Manual
11
to enter maintenance page. Maintenance includes rinse and calibration. See as Figure
2.11.
Figure 2.11
Rinse is used in rinse pipeline and drain pipeline. If the first using or long time not using,
please rinse pipeline first. Rinse pipeline is useful for checking leaks. Rinse is completed
in manual mode. Select 1 Rinse and press Set key to enter rinse page. See as Figure
2.12.
Figure 2.12
Press Up or Down to set the rinse speed. Tap-and-hold Set key to start rinsing and
release Set key to stop rinsing.
Calibration is the process of measuring accurate flow rate. You must calibrate the pump
before running it or else the pump will run in inaccurate flow rate. Select 2 Calibration
and press Set key to enter calibration mode choose page. See Figure 2.13.
Figure 2.13
After set the calibration mode, press Set key to enter calibration time setting page. See
Figure 2.14.

LLS Plus Peristaltic Pump User Manual
12
Figure 2.14
Press Up or Down key to select a calibration time, and press Set key to start calibrating.
See Figure 2.15.
Figure 2.15
If you want to stop calibrating, press Esc key at any time. After calibration, the system
will enter calibration volume set page. See as Figure 2.16.
Figure 2.16
Input the calibration volume, press Set key to save the calibration parameters and press
Esc key to cancel change.
Note：The calibrate mode corresponds to the run mode you will use, if you use
flow mode to run, you should choose flow mode to calibrate.
The tube will inflate after a period of time, and the rate will change, so you should
calibrate the rate at fixed period. It is suggested that you change the tube every 3
months.
2.2.4Settings
In main menu page, press Up or Down key to select 4 Settings to enter system settings
page. See as Figure 2.17.

LLS Plus Peristaltic Pump User Manual
13
Figure 2.17
Press Up or Down key to select 2 Language to enter language choose page. See as
Figure 2.18.
Figure 2.18
Press Up or Down key to select 3 Tube Use Time and press Set key to enter tube
usage statistics page. See as Figure 2.19.
Figure 2.19
The figure shows the time of pump used. Press Up or Down key to select Reset, press
Set key to zero the use of time and press Esc key to cancel resetting and exit.
Press Up or Down key to select 4 Restore Default and press Set key to restore the
default value before the factory.

LLS Plus Peristaltic Pump User Manual
14
3. Maintenance
3.1 Chemical Compatibility
The standard configuration of the pump tube is silicone tube, it can be apply to most cases.
If with application-specific liquid, please contact with the manufacture to confirm the
chemical compatibility.
3.2 Storing Pump
For long-term storage, prime and purge the system with methanol to facilitate drying.
Cover the instrument to protect it from damage.
4. Technical Support
If a problem persists and you cannot rectify, please contact our Service Department. To
expedite service, please have your instrument’s model ready and provide the
application-specific information (such as liquids) etc.
Kamoer Fluid Tech (Shanghai) Co.,Ltd.
Website：www.kamoer.com
Support email: [e-mail]

LLS Plus Peristaltic Pump User Manual
15
Appendixes
Appendix A Technical Specifications
Drive
stepper motor
Power Requirements
Input
AC 100-240V
Output
DC 24V
Power Rating
50W
Weight
2.5Kg
Dimensions
204x115x188 mm
Ambient temperature
0℃to 50℃
Humidity Range
10%–90%, non-condensing
Appendix B Packing List
NO.
Item
Description
Quantity
1
LLS Plus Peristaltic Pump
with one pump head
1pcs
2
Power cord
1pcs
3
User Manual
English
1pcs