Kamoer X1PROT2 User manual

X1 PRO T 2
Stepper Micropump
Quick Start Guide
A0 2021/11/18
Kamoer Fluid Tech(Shanghai) Co.,Ltd.
www.kamoer.com

1
Know X1 PRO T 2
X1 PRO T 2 is remotely controlled via a mobile phone App, using a long-life stepper motor,
which can be used as a dosing pump or a calcium reaction pump; When used as a dosing
pump, it can flexibly and accurately replenish various elements required for the growth of
marine organisms, such as calcium, magnesium, KH enhancer, trace elements, etc., to the
marine biological tank. Through automatic addition, the workload of manual addition can
be greatly reduced, and errors such as missed addition, excessive addition or insufficient
addition caused by manual addition can also be avoided. When used as a calcium reaction
pump, it can provide a stable flow of water to the calcium reactor.

2
Download the app
Scan the box or the QR Code below to find the application download with the following icon.
Apple users enter the App Store application store, Android users enter the
Google Play application store, search for "Kamoer Remote", find the application
download corresponding to the icon.
Note: This App supports Apple devices with iOS9.1 and above, and Android devices
with Android4.4 and above.
Register account
Open the App, select the phone registration or email registration method, and follow the App
guidelines to complete the account registration.
Note: region selection is very important, and selection errors will cause network allocation. It
is recommended to select the region by scanning the device QR code.

3
View the Tutorial
On the device list page, click the "?" icon in the upper right corner to enter the "Tutorial"
page, and select "X1 PRO T2" to view the tutorial. The tutorial includes the user manual
and frequently asked questions.

4
Display Description
a. Work Mode: indicates the functional position of the interface, and the operating mode
indicates that the machine is working on the home page
b. Work Status Indication: In the non-lock screen state, press the button, the pump
starts to work, at this point the middle of the screen shows the "in operation..." copy,
press the button while the pump is working, the pump stops.
c. Network Connection Status Indication
NET O: Indicates that the network is normal, at which point the device can be operated
via an App connection
NET S: Indicates that the device is in the distribution network state, need the user
network to complete before the normal networking
NET F1: Indicates that the device failed to connect to the router
NET F2: Indicates that the device successfully connected to the router, but failed to
connect to the cloud
d. Flow Display: Shows the flow rate of the pump, which can be adjusted by adjusting the
knob while the pump is running.
e. Lock Screen Status: the user does not operate the device for a long time, the device
screen will enter the screen protection state, screen protection state will show an L
letter on the screen, from top to bottom line dynamic display, to use the knob to
operate the device, you need to unlock the screen to operate, press the knob to unlock
the screen.
f. App Control: The interface displayed when the phone App controls, when the interface
is in the App control, the knob cannot control the device.

5
Connect your X1 PRO T 2 to the Cloud
This device supports knob operation, also supports mobile app remote control, if you
want to control through the mobile phone app, you need to first configure the device to
connect to the Wi-Fi network, the specific operation steps are as follows:
1. The wireless router has been connected to the Internet, and the mobile phone is
connected to the 2.4G Wi-Fi hotspot of the wireless router (the device does not support
5G Wi Fi and cannot use 5G Wi-Fi hotspot).
2. Open the Kamoer Remote App, log in with the registered account, click the "+" icon in
the upper right corner, select "Add device", and select "X1 PRO T 2" in the list of
supported devices.
3. After inputting the Wi-Fi password, select the device as shown in the figure above by
operating the device knob to make the device enter the network configuration state,
and complete the network configuration according to the interface prompt.
4. If select configure network by router, the device will display Sta Setting, and switch to
By Router in the upper right corner of the corresponding mobile App interface. Click the
""Sta Setting..."is on display" button to enter the configure network by router. Wait for
the network configuration to complete.
5. If you select configure network by AP, the device will display AP Setting, select Connect
by AP in the App interface of the corresponding mobile phone, and click the ""AP
Setting..."is on display" button to enter configure network by AP. Complete the network
configuration according to the interface prompt.

6
6. After the connection is successful, the App will prompt that the connection is successful.
At this time, the device will return to the home page, and net o will be displayed in the
upper right corner, which means that the device has been connected to the cloud. At
this time, the user has also completed the binding of App and device.
Bind X1 PRO T 2
There are two ways for a user app to bind a device, the first way is to bind the device
through connect to the network again, and the second way is that the device is already
connected to the cloud via a wireless router, where the phone can be connected to the
wireless router, the app will display the locally available device, the user can be scanned
out of the list of devices, Directly click on the corresponding "binding" button to bind the
device.
Unbind
Press the corresponding device icon on the device list page, pop up the “Remove” icon
at the bottom, and click the “Remove” icon to unbind

7
Note
Please use the appliance to bring your own power adapter and work in a specified
work environment.
This product only supports 2.4G Wi-Fi, does not support 5G Wi-Fi.
The device should be placed in a reasonable position, the connecting pipe of the liquid
should be as short as possible, and the connecting pipe of the liquid should be
suspended above the aquarium.
Please carefully check whether the connection direction of the water inlet and outlet is
correct, and it must not be reversed

8
Technical Parameters
Dimensions (Lx W x H)
75x70x110mm
Weight
534g (power adapter is not included)
Power Adapter
Input: 100VAC -240VAC
Output: DC24V 1.9A
Pump Parameter
Pump Head: 3 rotor KPAS100
Flow: <=110ml/min
Precision: <±2%
Interface
Adjustment knob/Wi-Fi
Working Environment
Temperatures: 0 - 70 ° C,
Humidity: 10% - 90% (non-condensation)
Storage Environment
Temperature -20°C – 85°C
Humidity 10% - 90% (non-condensation)

9
Packing List
No
Name
Model
Unit
Qty
01
Controller
X1 PRO T 2
pcs
1
02
Power adapter body
DC24V 1.9A
pcs
1
03
Power adapter plug
□US □UK □EU □AU
pcs
1
04
Silicone tube
3.2x6.4mm
meter
2
05
Silicone tube
6.4x9.6mm
meter
1
06
Grease
FT-2;10g
pcs
1
07
Plumbing connectors
1/8 to 1/4 straight through
pcs
2
08
Quick Start Guide
pcs
1

10
Warranty service
Warranty service is only valid for users who are correctly installed, used and maintained
according to the manual. Any malfunction or damage is not covered by the warranty.
Please keep your purchase voucher properly so that you can get satisfactory after-sales
service in time.
The company will provide free warranty service for any damage caused by manufacturing
processes or components within one year from the date of purchase. The free repair
service provided during the warranty period includes free repair, free replacement and
replacement of faulty spare parts, and products that cannot be repaired are replaced by
the same model. The free service does not include shipping costs for the product due to
repairs.
Kamoer Fluid Tech (Shanghai) Co., Ltd.
Addr: Building 4, No.79 Xiangjing Road, Songjiang District,Shanghai
website：www.kamoer.com
Kamoer is registered trademark of Kamoer Fluid Tech (Shanghai) Co., Ltd. We reserve
the right to improve or alter appearance and technical specifications without notice.