Kamoer X1 PRO T User manual

X1 PRO T
Micropump
Quick Start Guide
A3 2022-11-25
Kamoer Fluid Tech (Shanghai) Co., Ltd.
www.kamoer.com

1
FCC warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This device generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this device does cause harmful interference to radio or television reception, which can be
determined by turning the device off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the device and receiver.
--Connect the device into an outlet on a circuit different from that to which the receiver is
connected.
--Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment
FCC Radiation Exposure Statement The antennas used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must
not be co-located for operating in conjunction with any other antenna or transmitter.

2
Warranty service
1. Warranty Conditions
The warranty service is only valid for users who have correctly installed, used and maintained
in accordance with the manual, and all man-made faults or damages are not covered by the
warranty. Please keep the proof of purchase in a safe place so that you can obtain satisfactory
after-sales service in a timely manner.
2. Warranty coverage
Within one year from the date of purchase, if there is any damage caused by the manufacturing
process or components, the company will provide free warranty service. The free maintenance
service provided during the warranty period includes free repair, free replacement of faulty
spare parts, and replacement of products that cannot be repaired with products of the same
model. Free service does not include shipping costs incurred for product repairs.
3. Non-warranty coverage
The following factors are not covered by the free warranty, and customer repairs are subject to
fees.
1) Product appearance (please confirm when purchasing);
2) Improper use, maintenance, or storage (please use, maintain and store correctly according
to the user manual);
3) Access to inappropriate power supply;
4) Damage to the components caused by the short circuit of the circuit board caused by the
entry of various insects into the machine;
5) Losses caused by accidents;
6) Use inappropriate spare parts (non-company spare parts are not applicable);
7) Persons not authorized by the company negligently handle, modify or repair (please do not
dismantle or repair without authorization);
8) Failure or damage caused by use outside the applicable occasion;
9) Damage caused by force majeure, etc.;
10) Consumable and wearing parts (pump tube, connector, connecting tube, etc.);
11) The warranty period has expired.

3
Know X1 PRO T
X1 PRO T is a single channel stepping micropump, which is remotely controlled by mobile App.
It adopts a long-life stepping motor and meets the requirements of precise addition and long-
time use. It can be used as both titration pump and calcium reverse pump. As a titration pump,
it can flexibly and accurately add various elements needed by marine organisms to the marine
biological tank, such as calcium, magnesium, KH lifting agent, trace elements, etc. through
automatic addition, the workload of manual addition is greatly reduced, and the mistakes
caused by manual addition such as omission, excessive or insufficient addition are avoided. As
a calcium reverse pump, it can provide stable flow for the calcium reactor.
X1 PRO T uses a high-quality plastic non corrosive geared pump, which will not slip or rust. This
is extremely reliable and includes threaded connectors to ensure that there will be no leakage
when joined to dose lines. The X1 Pro T uses high grade European internal tube line.
1. Liquid outlet 2. Liquid inlet 3. KFS pump head
4. Indicator light 5. Reset button 6. DC 12V power 7. Screw fixing holes

4
Download the app
1. Scan the box or the QR code below to find the application download with the following
icon.
2. Apple users enter the App Store application store, Android users enter the Google Play
application store, search for "Kamoer remote", find the application download
corresponding to the icon.
Note: This App supports Apple devices with iOS 9.1 and above, and Android devices with
Android 4.4 and above.
Register account
Open the App, scan the QR code of the device or manually select the region where the device is
located, register via mobile phone or email, and follow the App prompts to complete the
account registration.
Note: Region selection is very important. Wrong region selection will result in failure to
configure the network. It is recommended to scan the QR code of the device to select the
region.

5
View tutorial
On the device list page, click the "?" icon in the upper right corner to enter the "Tutorial" page,
and select "X1 PRO T" to view the tutorial. The tutorial includes the user manual and frequently
asked questions.

6
Indicator light description
Indicator Status Description
Status Indicator
（blue）
On Connected to the cloud
Off Disconnected from router
Flashes quickly
Configure network by router. When the
router turns on AP isolation, this mode
cannot be used, and you need to switch to
AP network configuration mode
Show flashing (on for 0.2
seconds, off for 2 seconds) Configure network by AP
Slow flashing (on for 2
seconds and off for 2
seconds)
Disconnected from the cloud
Power Indicator
（red）
On Powered on
Off No power supply or power failure
Note: X1 PRO T uses red and blue two-color indicator lights. When the blue light is on or
flashing, the red light is off.
Connect X1 PRO T to the cloud
The dosing pump is powered on for the first time after unpacking, and the status indicator light
(blue) flashes slowly. You then need to use the App to connect the micropump to the cloud
through a wireless router. The steps are as follows:
1. Ensure that the wireless router has connected to the Internet. The mobile phone is
connected to the 2.4G Wi-Fi hotspot of the wireless router (the device does not
support 5G Wi-Fi, and 5G Wi- Fi hotspots cannot be used)
2. Open the Kamoer Remote App, log in with the registered account, click the "+" icon in
the upper right corner, select "Add Device", select "X1 PRO T" in the list of supported
devices to add.
3. After entering the router Wi-Fi password, click the "Next" button, press and hold the
Reset button on the front panel for more than 6 seconds, then release it, click the
"Next" button, and wait for the blue status indicator to flash;

7
4. About 3 seconds later, the blue light will flash intermittently every 2 seconds,
indicating that the device is in the network. click the "The blue light is flashing slowly
and intermittently" icon on the App interface, and complete the network
configuration according to the interface prompts.
5. After the connection is successful, the App will prompt that the connection is
successful. At this time, the status indicator (blue light) is on, indicating that
micropump has been connected to the cloud, and the user has also completed the
binding with X1 PRO T.
Bind X1 PRO T
There are two ways for user to bind the device.
Method 1: Bind the dosing pump through the network configuration described above.
Method 2: If the dosing pump is connected to the cloud through the router, the mobile phone
can be connected to the wireless router, and the App will scan and display the locally available
dosing pump. The user directly clicks the "Bind" button on the right side of the dosing pump to
complete the binding.
Unbind X1 PRO T
A long press with the corresponding device icon on the device list page, the "Delete" icon will
pop up at the bottom, click the "Delete" icon to unbind.
Notes
Please use the power adapter provided by the product and work under the specified
working environment
This product only supports 2.4G Wi-Fi, not 5G Wi-Fi.
Micropump should be placed in a close position to ensure that the height difference
between the liquid inlet and the liquid outlet is within 0.5 meters.
The connecting pipe for the liquid inlet should be as short as possible, the connecting
pipe for the liquid outlet should be suspended above the liquid being dosed.
Check dose lines are in the right direction on pump inlet outlet before using dose unit.

8
Technical Parameters
Dimensions
(length*width*height) 100 * 92 * 63 mm (with pump head)
Weight 316 grams (not including power adapter)
Power Adapter Input: 100-240VAC
Output: DC12V 2A
Dosing parameters
Dosing channel: 1 KFS pump head Flow rate: >70ml/min
Dosing times: 24 times/day-1 time/99 days
Dosing accuracy:<±2%
Volume range: 0.1ml-9999ml
Interface WIFI communication interface
working environment Temperature: 0-70℃
Humidity: 10%-90% (non-condensing)
Storage environment Temperature: -20℃-85℃
Humidity: 10%-90% (non-condensing)

9
Packing List
No. Name Specification Unit Qty
01 Host X1 PRO T pcs 1
02 Power adapter body DC12V 2A set 1
03 Power adapter plug US/EU/UK/AU pcs 1
04 Plastic measuring cylinder 10mL set 1
05 PVC connecting pipe 4*6mm meter 2
06 Quick Start Guide English pcs 1

Kamoer Fluid Tech (Shanghai) Co., Ltd.
Addr: Building 4, No.79 Xiangjing Road, Songjiang District, Shanghai
Website: www.kamoer.com
Kamoer is registered trademark of Kamoer Fluid Tech (Shanghai) Co., Ltd. We reserve the right
to improve or alter appearance and technical specifications without notice.