Kamoer X1 PRO 2 User manual

X1 PRO 2
Dosing Pump
Quick Start Guide
A0 12/19
Kamoer Fluid Tech (Shanghai) Co., Ltd.
www.kamoer.net

1
Know X1 PRO 2
X1 PRO 2 is a single-channel intelligent dosing pump with WIFI remote function,
mainly used to add the various elements needed for marine life growth, such as
calcium, magnesium, KH booster, trace elements, etc. to marine life cylinder timing,
quantitative and accurate. The automation of X1 PRO 2 can greatly reduce the
amount of manual added work, but also avoid manual addition caused by leakage,
adding excessive or insufficient errors.
1 2
4
35
8
6 6
7
1.Liquid inlet 2.Liquid outlet
3.Power/status indicator 4.KXF pump head
5.Reset button 6.Hanging hole
7.DC12V power input 8.Power output

2
Download app
1. Scan the box or the QR code below and find the app download for the icon below.
iOS Android
2. Apple users enter the App Store, Android users enter the Baidu App Store,
search for "Kamoer Remote" and find the corresponding icon app download.
Note: This app supports iOS 9.1 and above versions of Apple devices, Android 4.4 and
above versions of Android devices.
Register account
Open the app, select the phone registration or email registration method, and follow the App
prompt to complete the account registration.

3
View Tutorial
Click the icon in the upper left corner of the device list page to enter the user page, click
"Tutorial" on the page to enter the product selection page, select "X1 PRO 2" to view the
tutorial, the tutorial includes the user manual and FAQ.
12

4
Indicator
Indicator Status Description
Status indicator
（Blue)
On Connected to the cloud via router
Off Disconnected from router
Fast flashing
Network configuration mode, at this time, the app
can configure the X1 PRO 2 to access the router
Slow flashing Disconnect from the cloud
Power indicator
（Red）
On Powered on
Off No power on or a power failure
Note: When the blue status indicator is on or flashing, the red power indicator is off.
Connect X1 PRO 2 to the cloud
The dosing pump is powered on for the first time after the box is open, the status indicator
(Blue) flashes slowly, at which point will require the use of an app to connect the dosing
pump to the cloud via a wireless router. Follow the steps below:
1. Ensure that the wireless router is connected to the Internet;
2. Press and hold the Reset button on the front panel for more than 4 seconds then release;
3. Wait for the blue status indicator to become a fast flashing state, at this time the dosing
pump has entered the network configuration mode;
4. Mobile phone connected to the wireless router 2.4G WIFI hotspot (device does not
support 5G WIFI, cannot use 5G WIFI hotspot);
5. Open the App, log in with the registered account, click the “+” icon in the upper right
corner, select “Add Device”, select “X1 PRO 2” in the list of supported devices, and then
follow the App prompt to complete the connection router operation.
6. After the connection is successful, the App will prompt the connection to be successful.
At this time, the status indicator (Blue) is on, indicating that the dosing pump is connected
to the cloud, and the user has also completed the binding with the dosing pump.

5
Binding X1 PRO 2
There are two ways for user to bind the X1 PRO 2.
Method 1: Bind the dosing pump through the network configuration described above.
Method 2: If the dosing pump is connected to the cloud through the router, the mobile phone
can be connected to the wireless router, and the App will scan and display the locally
available dosing pump. The user directly clicks the "Bind" button on the right side of the
dosing pump to complete the binding.
Unbind
On the device list page, press and hold the corresponding dosing pump icon, the "Remove"
icon pops up at the bottom, and clicks the Remove icon to unbind.
Notes
 Please use the product's own power adapter and work in the specified working
environment.
 This product only supports 2.4G WIFI and does not support 5G WIFI.
 The dosing pump should be placed in a reasonable position to ensure that the height
difference between the inlet and the outlet is within 0.5 m.
 The connection pipe for liquid inlet should be as short as possible, and the outlet
connection pipe should be suspended above the container.
 Please check carefully that the inlet and outlet connections are in the correct direction.

6
Technical parameter
Dimensions
(length x width x height)
60 x 95 x 83 mm (including pump head)
Weight 214g (does not include power adapter)
Power Adapter
Input: 100VAC -240VAC
Output: DC12V 1A
Dosing
parameters
Dosing channel: 1 KXF-B06 pump head
Flow: >33ml/min
Number of dosing：24 times/day - 1 time/99 days
Dosing accuracy：<±2%
Volume range：0.1ml-9999ml
Interface WIFI
Working environment
Temperatures: 0 - 70℃
Humidity: 10% - 90% (non-condensation)
Storage environment
Temperature: -20C - 85℃
Humidity: 10% - 90% (non-condensation)
Packing list
No Name Model Unit Qty
1 Dosing pump X1 PRO 2 pcs 1
2 Power adapter body DC12V 1A pcs 1
3 Power adapter plug □US □UK
□EU □AU pcs 1
4 Plastic cylinder 10ml pcs 1
5 PVC connection tube 3*5 mm; Transparent meter 2
6 Quick start guide English pcs 1
8 Hanging screw ST2.9*13 pcs 2
9 Product certification pcs 1

Warranty service
Warranty service is only valid for users who are correctly installed, used and maintained
according to the manual. Any malfunction or damage is not covered by the warranty. Please
keep your purchase voucher properly so that you can get satisfactory after-sales service in
time.
The company will provide free warranty service for any damage caused by manufacturing
processes or components within one year from the date of purchase. The free repair service
provided during the warranty period includes free repair, free replacement and replacement
of faulty spare parts, and products that cannot be repaired are replaced by the same model.
The free service does not include shipping costs for the product due to repairs
KamoerFluidTech(Shanghai)Co.,Ltd.
Address: Building 4, No. 79, Xiangjing Road, Songjiang District,
Shanghai
Website：www.kamoer.net
Kamoer is registered trademark of Kamoer Fluid Tech (Shanghai) Co., Ltd. We reserve the
right to improve or alter appearance and technical specifications without notice.