Kapture KPT-900 User manual

KPT-900 User Manual
with GPS | ADAS
IN-CAR
DASH CAM
YOUR WITNESS ON THE ROAD

3
Caution....................................................................................................................................................................... 5
Battery warning .......................................................................................................................................................... 5
Notes on Installation ................................................................................................................................................... 5
1 Introduction .............................................................................................................................................................. 6
1.1 Features ............................................................................................................................................................. 6
1.2 Package Contents .............................................................................................................................................. 6
1.3 Product Overview ............................................................................................................................................... 6
2 Getting Started ......................................................................................................................................................... 7
2.1 Inserting the Memory Card.................................................................................................................................. 7
2.2 Installing in Vehicles ............................................................................................................................................ 7
2.2.1 Mount to Windshield ............................................................................................................................... 7
2.2.2 Adjust the device position ....................................................................................................................... 7
2.3 Connecting to Power.......................................................................................................................................... 8
2.4 LED Indicator...................................................................................................................................................... 9
2.5 Powering the Device On / Off.............................................................................................................................. 9
2.5.1 Auto Power On / Off................................................................................................................................ 9
2.5.2 Manual Power On / Off and Reset........................................................................................................... 9
2.5.2.1 Manual Power On ................................................................................................................................... 9
2.5.2.2 Power Off................................................................................................................................................ 9
2.5.2.3 Reset the device ..................................................................................................................................... 9
2.6 Initial Settings ................................................................................................................................................... 10
2.6.1 Set Automatic Record........................................................................................................................... 10
2.6.2 Set the Date / Time ............................................................................................................................... 10
3 Using the Car Recorder.......................................................................................................................................... 11
3.1 Recording Videos ............................................................................................................................................. 11
3.1.1 Record videos while driving................................................................................................................... 11
3.1.2 Emergency Recording........................................................................................................................... 11
3.1.3 The Recording Screen........................................................................................................................... 12
3.1.4 Add speed point ................................................................................................................................... 13
3.1.5 Taking Snapshot ................................................................................................................................... 13
3.1.6 4 Grid Function Chart in the LCD screen............................................................................................... 13

4
3.2 Driving Safety ................................................................................................................................................... 14
3.2.1 Lane Departure Warning System (LDWS) .............................................................................................. 14
3.2.2 Forward Collision Warning System (FCWS) ........................................................................................... 15
3.2.3 Front Car Movement Detection (FMCD)................................................................................................. 16
3.2.4 Headlight Warning................................................................................................................................. 17
3.2.5 Speed Cam Alert................................................................................................................................... 18
3.2.6 Speed Limit Alert.............................................................................................................................. 18-19
3.2.7 Driver Fatigue Alert................................................................................................................................ 19
3.2.8 Collision Detection ........................................................................................................................... 19-20
3.2.9 Parking Mode ....................................................................................................................................... 20
3.2.10 ACC/DEC Alert ..................................................................................................................................... 21
3.3 Playing Videos and Viewing Pictures................................................................................................................. 22
3.3.1 Playing Videos and Emergency Recordings........................................................................................... 22
3.3.2 Viewing Pictures.................................................................................................................................... 22
3.3.3 The Playback Screen ............................................................................................................................ 23
3.3.4 Deleting Files.................................................................................................................................... 23-24
4 Adjusting the Settings ............................................................................................................................................ 24
4.1 Using the Menu ................................................................................................................................................ 24
4.2 Menu Items.................................................................................................................................................. 25-27
5 Installing the Software............................................................................................................................................ 28
6 SuperCar Software ................................................................................................................................................. 28
7 Specifications ......................................................................................................................................................... 29
About this Guide....................................................................................................................................................... 30
Warranty................................................................................................................................................................... 31

5
Caution
•Ensure you are using your Car DVR within your countries’ road laws. Please make sure you are familiar with your local road legislation
before use.
•Avoid leaving your Car DVR in direct sunlight for extended periods of time in an unventilated space.
•Please set time and date before you use this device to record.
•The notifications given by the Car DVR are suggestions only, please drive to the actual conditions.
•The results of GPS positioning are only for reference. The Car DVR will lose GPS positioning abilities when signal is blocked (eg driving
through tunnels, enclosed car parks).
•GPS positioning accuracy may vary depending on weather and surroundings such as dense cities, tunnels, or forests.
GPS satellite signals cannot pass through most solid materials. Tinted windows may also affect the GPS signal.
•The values displayed in this system, such as speed, position, and the distance warning, may be affected by the surrounding environment.
•The system is to be used only for non-commercial use, within the limits permitted by the relevant laws
•Avoid using the Car DVR in the vicinity of any devices that emit radio interference (eg. Microwave Ovens).
•It is considered normal operation for the Car DVR to get warm during use.
Battery Warning
•Always charge the Car DVR using the provided charger. Improper charging of the Car DVR and may result in failure of the internal battery.
•Never dismantle the Car DVR or expose the internal battery.
•Do not dispose of the Car DVR in fire.
•Dispose of the Car DVR observing local regulations being mindful of the internal battery.
•Do not attempt to replace or expose the internal battery.
Notes on Installation
1. It is advised that the Car DVR is installed near the rear view mirror, at the top centre of the windshield for optimal operation.
2. Make sure that the lens is within the range of the windscreen wiper to ensure a clear view when it rains.
3. Do not touch the lens with your fingers. Finger prints left on the lens will result in unclear videos or photos. If photos or videos are blurred,
please clean the lens gently with a microfibre cloth.
4. Do not install the device on a tinted window. Doing so may damage the tint film and restrict the Car DVR’s GPS signal.
5. Make sure that the installation position does not hinder or block the field of view or GPS signal.
6. Only use the included charging cable to power the Car DVR.

6
1. Introduction
Thank you for purchasing a Kapture Car DVR. Please read through these instructions before attempting to install or use this product.
1.1 Features
• Recording 1080P footage at 30 frames per second
• 2.7” LCD colour touch screen
• 140° Wide angle lens
• Advanced Driver Assistance Systems (ADAS)
• Automatic Emergency recording for collision detection
• Supports MicroSD memory cards Class 6 and above, up to 32GB
• GPS
1.2 Package Contents
Car DVR Bracket Software CD Product Manual 12v Adapter
1.3 Product Overview
1. Bracket Socket
2. Memory Card Slot
3. Power Switch
4. LED Indicator
5. USB/Power Connector
6. GPS Antenna
7. Wide Angle Lens
8. Speaker
9. Microphone
10. LCD Touch Panel

7
2. Getting Started
2.1 Inserting Memory Card
With the Screen facing upward, insert memory card with the pins facing upward as illustrated. Push the memory card in until a click
sound is heard, indicating the card is in position.
Note:
1. Do not remove or insert the memory card when the device is turned on. This may damage
the memory card.
2. Please use a Class 6 or higher rating Micro SD card, up to 32GB.
3. Please format the Micro SD card before the initial use.
4. When removing the memory card, be careful as the card may eject quickly.
To remove the memory card
Ensuring the power switch is in the off position (2.5.2.2) push The Micro SD Card to eject the unit from the slot.
2.2 Installing in Vehicles
2.2.1 Mount to Windshield
1. Push the bracket into bracket slot on top
of device, and slide the mount from left to
right until a click sound is heard.
2. With the suction-cup lock switch in the
up orientation, position the suction-cup
on the windshield.
3. Hold the base firmly on the windshield
and press down the lock switch to
mount the car holder to the windshield.
Make sure the base is securely locked
in place.
2.2.2 Adjust the device position
1. Loosen the knob and adjust the device
vertically and/or horizontally.
2. Tighten the knob to make sure the
device is securely locked in place.

8
2.3 Connecting to Power
Use only the included charger to power the device and charge the built-in battery.
1. It is advised that the Car DVR is installed near the rear
view mirror, at the top centre of the windshield for optimal
operation.
2. Plug the other end of the car adapter to the cigarette
lighter socket of your vehicle. Once the vehicle engine is
started, the device automatically powers up.
Note:
1. This product contains functions such as LDWS (3.2.1) FCWS (3.2.2) and FCMD (3.2.3). Please refer to the alignment measures
given in these sections during their installation for improved accuracy.
2. The built in battery is designed for short use only to run parking mode when your vehicle is parked and the Car DVR is not
receiving power. The battery cannot power the device long term, for everyday use please ensure that the Car DVR is powered by
the included Charger.
Battery Status Indicator
ICON DESCRIPTION Note:
Please take note if the environment temperature reaches 45°C
or above, the car adapter will supply power to device, but the
Lithium-ion battery will not charge. This is a characteristic of
Lithium-ion batteries and is not a malfunction.
Full battery power.
2/3 battery power.
1/3 battery power.
Low battery.
Battery charging.
Connect the car adapter to charge the battery.

9
2.4 LED Indicator
STATUS EXPLANATION LED INDICATOR COLOUR
Power off, battery charging Red
Power off, battery fully charged LED light off
Power on, battery charging Red
Power on, battery fully charged Green
Standby / Standby with screen off Green
Recording / Recording with screen off Flashing red
2.5 Powering the Device On / Off
2.5.1 Auto Power On/Off
Once the vehicle engine is started, the device will automatically power up and start recording (unless the Automatic Record
function is disabled (2.6.1)).
2.5.2 Manual Power On/Off and Reset
2.5.2.1 Manual Power On
Slide the power switch making sure that the
power switch locks over the memory card slot.
2.5.2.2 Power Off
Slide the power switch making sure that the
memory slot is open. The device will start the
power down sequence. Do not power on the
device during the power down sequence, as the
recorded data may be corrupted.
2.5.2.3 Reset the Device
If the device does not function normally, try restarting the Car DVR. To restart your Car DVR, slide the power switch
into the off position and verify the Micro SD Card is in the removable state; wait for 7 seconds and slide the power
switch back to the on position to restart the device.

10
2.6 Initial Settings
Before using the Car DVR, we recommend you enable the Automatic Record function and set the correct Date and Time.
2.6.1 Set Automatic Record
The default setting for the Automatic Record function is enabled. The Car DVR will automatically start recording when the
Car DVR receives power from the power cable. In case Automatic Record is disabled, enable it with the following steps:
1. Touch to enter Main Menu
2. Touch to switch to Record Main Menu
3. Touch / to select and enter the Automatic Record function menu; touch again to select ON.
4. Touch to return to Record screen.
2.6.2 Set Date / Time
To set the correct date and time, please follow the instructions below:
1. Touch to enter Main Menu
2. Touch to select the System main menu, touch / to select Set Timezone Menu, touch / to
set the current Timezone; then touch again to complete setting.

11
3. Select to enter Date / Time menu. Touch / to select each value; touch / to select previous or next
field; Confirm by touching to complete setting.
Note:
1. If GPS is enabled the Car DVR clock will be synchronised with the satellite clock signal based on the time zone specified in the Set
Timezone menu.
2. If satellite positioning is not available, the Car DVR clock will need to be set manually using the Date/Time setting.
3. Please be aware that touching during the recording process will stop the recording and enter the menu.
3. Using the Car DVR
3.1 Recording Videos
3.1.1 Record videos while driving
When the vehicle is started and the Car DVR Automatic Record function is enabled, the Car DVR will automatically turn on
and start recording.
During the Car DVR’s start up sequence the built in touch screen will be unresponsive.
Recording will automatically stop when the vehicle is powered off. To manually stop recording touch the icon on the
Car DVR screen.
Note:
1. Because of how some vehicles are wired, the recording may continue when the engine is switched off. If this happens, please
manually turn off the Car DVR or remove the car adapter from the cigarette lighter when not in use.
2. The recording loop length can be configured to save a video file for every 3 or 5 minutes of recording. For information on how to
adjust this setting please refer to Video Duration (4.2).
3. The device saves the recording on the inserted Micro SD Card. If the memory card capacity is full, the oldest file in the memory
card is overwritten.
3.1.2 Emergency Recording
Emergency Recording saves the current video file and protects it from being overwritten. To start the Emergency Recording,
please follow the instructions below:
1. During video recording, touch the icon marked to enter emergency recording mode, the “Emergency” message
will be shown on the lower left corner of the screen, and the recorded file will be protected.

12
2. Touch again, to halt the recording.
Note:
1. If the Collision Detection function is enabled and a collision is detected, the device will automatically trigger the emergency
recording and protect the current video file. Please refer to Collision Detection (4.2).
2. The emergency recording file is created as a new file, which will be protected to avoid being overwritten by normal loop recording.
8GB (or above) memory cards can save up to 10 emergency video files. The alert message of “Emergency files are full” will pop
up on the screen when the emergency recording files are full, and the oldest emergency file will be automatically deleted when a
new emergency recording file is created.
3.1.3 The Recording Screen
No. ICON ITEM DESCRIPTION
1Recording Indicator Indicates the recording status.
2Date / Time Indicates the recording date and time.
3Add speed point Touch to add a speed cam point.
4Menu Touch to enter the main menu.
5Taking Snapshot While recording, touch to take a photo.
6Recording Duration Indicates the video current duration.
7Satellite positioning icon The icon appears on the screen when satellite positioning of the device is ready.
8Battery Indicates the remaining battery power.
9Driving info Touch to enter the Driving Info chart Please refer to Driving info screen (3.1.6).
10 Recording Touch to start recording, touch again to halt the recording.
11 Emergency Recording During video recording, touch to enter emergency recording mode.
Please refer to Emergency Recording (3.1.2).

13
3.1.4 Add speed point
You can manually add speed cam positions in this Car DVR.
1. Press to add new Speed Camera Position during recording.
2. Up to 200 speed camera points can be saved.
3. This product has a capacity of 200 speed cam positions. In case you are trying to add more than that the system prompts
with message “Speed Position is full”.
Note:
You may delete custom speed cam positions by selecting the Delete speed point option from the File / Position menu. Please
note that all of your existing speed cam positions are deleted once the Delete speed point option is selected. Make sure you
are ready to recreate all of your custom speed cam positions before activating this option.
3.1.5 Taking Snapshots
You can also use your Car DVR to take snapshots.
1. Press in recording mode to take a snapshot
2. A snapshot is taken when this icon appears at centre of screen.
Note:
The definition of photos taken by this product when it is recording and the car is moving is subject to the speed of the target object
and changes in ambient lighting. The photograph function is better used for taking still pictures after an accident when all vehicles
involved have stopped.
3.1.6 Driving Info Screen
Please touch when you are recording, the Driving Info Screen will be displayed.
Touch any point on the screen to return to Record Screen.
No. ITEM Note:
Driving Speed, Driving Direction and Speed
Camera Alert are only applicable when the
GPS is activated and within signal range.
1Driving Speed
2Time
3Driving Direction
4Speed Cam Alert

14
The following driver safety functions are for reference only. Drivers are advised to exercise discretion based on
actual road conditions.
3.2 Driving Safety
Note:
1. Driving Safety (ADAS - Advanced Driver Assistance Systems) functions are limited to triggering no more than two alerts at
the one time. If a voice alert message has been triggered, any other alarms will be halted until the first alert has finished.
2. The speed cam prompt is disabled if this product is not connected to an external power source.
3.2.1 Lane Departure Warning System (LDWS)
Once your car’s location is determined by GPS and the LDWS function is enabled, the Car DVR produces voice and on
screen alerts when your car leaves or changes lanes at speeds over 50 km/h.
To set the LDWS, please follow the instructions below:
1. Touch to enter Main Menu
2. Touch to switch over to Driving Safety Main Menu.
3. Touch / to select to enter the LDWS function menu, then
touch (On) to enable LDWS.
4. Touch to return to the record menu
5. After enabling LDWS, the screen will display alignment guidelines ,
please adjust the position of the Car DVR so that the horizontal guideline
and the horizon line overlap, and the diagonal lines are aligned with the lane
markings on screen. Make sure that the guide lines are not obscured by
any part of your vehicle (e.g. hood) during installation, as this may affect the
accuracy of LDWS.
6. Once your car’s location is determined by GPS, this product produces
voice and screen message alerts when you change lanes at speeds over
50 km/h.

15
Note:
1. LDWS is only active when satellite positioning is available. Make sure GPS settings
on your Car DVR is activated
2. The Driving Safety functions such as LDWS, FCWS, FCMD, Headlight
Warning, Speed Cam Alert, Speed Limit Alert, Driver Fatigue Alert and
ACC/DEC Alert will be disabled if the product doesn’t connect with the external
power supply.
3. The LDWS function may give false alarms in poor conditions, including rainy or
cloudy weather, at night, or in poor lighting environments. Drivers are advised to
exercise discretion based on actual road conditions.
3.2.2 Forward Collision Warning System (FCWS)
Once your car’s location is determined by GPS and the FCWS function is enabled, this product produces voice and screen
message alerts when you drive at speeds over 60 km/h and are less than 20m away from the car in front of you.
To set the FCWS, please follow the instructions below:
1. Touch to enter Main Menu
2. Touch to switch over to Driving Safety Main Menu.
3. Touch / to select to enter the FCWS function menu, then
touch (On) to enable FCWS.
4. Touch to return to the record menu
5. After enabling FCWS, the screen will display the alignment guidelines
please adjust the position of the Car DVR so that the horizontal guideline
and the horizon line overlap and the diagonal lines are aligned with the lane
markings on screen. Make sure that the guide lines are not obscured by
any part of your vehicle (e.g. hood) during installation, as this may affect the
accuracy of FCWS functionality.
6. Once your car’s location is determined by GPS, this product produces
voice and on screen alerts when you drive at speeds over 60 km/h and are
less than 20m away from the car in front of you.

16
Note:
1. FCWS is only active when satellite positioning is available. Make sure GPS
settings on your Car DVR is activated.
2. The Driving Safety functions such as LDWS, FCWS, Headlight Warning,
Speed Cam Alert, and Driver Fatigue Alert will be disabled if the product isn’t
connected to the external power supply.
3. The accuracy of the FCWS function is affected by poor visibility conditions,
including rainy or cloudy weather, at night, or in poor lighting environments. Drivers
are advised to exercise discretion based on actual road conditions.
3.2.3 Front Car Movement Detection (FCMD)
Once your vehicle’s location is determined by GPS and the FCMD function is enabled, the Car DVR will detect the
movement of the traffic in front of you. When your car remains motionless for 20 seconds it produces voice and on screen
alerts when the car in front of you moves forward.
To set the FCMD, do the following:
1. Touch to enter Main Menu
2. Touch to switch over to Driving Safety Main Menu.
3. Touch / to select to enter the FCMD function menu,
then touch (On) to enable FCMD.
4. Touch to return to the record menu
5. After enabling FCMD, the screen will display align icon , please
adjust the Car DVR so that the horizontal guideline and the horizon line
overlap and the diagonal lines are aligned with the lane markings on screen.
Make sure that the guide lines are not obscured by any part of your vehicle
(e.g. hood) during installation, as this may affect the accuracy of FCMD
functionality.
6. Once your car’s location is determined by GPS, when your vehicle is
motionless for 20 seconds the Car DVR produces voice and on screen
alerts when the movement of the traffic in front of you moves forward.

17
Note:
1. FCMD is only active when satellite positioning is available. Make sure GPS setting
on your Car DVR is activated.
2. The Driving Safety functions such as LDWS, FCWS, Headlight Warning,
Speed Cam Alert, and Driver Fatigue Alert will be disabled if the product isn’t
connected to the external power supply.
3. The FCMD function may give false alarms in poor visibility conditions, including
rainy or cloudy weather, at night, or in poor lighting environments. Drivers are
advised to exercise discretion based on actual road conditions.
4. FCMD will automatically recalibrate 30 seconds after the initial alert if the FCMD
function has been activated.
3.2.4 Headlight Warning
The Headlight Warning function produces voice and screen message alerts when the Car DVR detects poor lighting
conditions.
To set the headlight warning, please follow the instructions below:
1. Touch to enter Main Menu
2. Touch to switch over to Driving Safety Main Menu.
3. Touch / to select to enter the Headlight Warning function
menu, then touch (On) to enable the Headlight Warning function.
4. Touch to return to the record menu
5. The Car DVR will now produce voice and on screen alerts when it detects
poor lighting conditions.
Note:
The Driving Safety functions such as LDWS, FCWS, Headlight Warning,
Speed Cam Alert, and Driver Fatigue Alert will be disabled if the product isn’t
connected to the external power supply.

18
3.2.5 Speed Cam Alert
Once your car’s location is determined by GPS and is approaching a manually
saved speed camera location the Car DVR produces voice and on screen
alerts.
To enable or disable Speed Cam Alert please follow the instructions below:
1. Touch to enter Main Menu
2. Touch to switch over to Driving Safety Main Menu.
3. Touch / to select to enter the Speed Cam Alert function
menu, then touch (On) to enable the function.
4. Touch to return to the record menu
5. Once your car’s location is determined by GPS and approaches a manually
saved speed camera location the Car DVR produces voice and screen
message alerts. The on screen alert will display red to remind you to slow
down if you are driving faster than the speed limit.
Note:
1. Speed Cam Alert is only active when satellite positioning is available. Make sure GPS
settings on your Car DVR is activated.
2. The Driving Safety functions such as LDWS, FCWS, Headlight Warning, Speed
Cam Alert, and Driver Fatigue Alert will be disabled if the product isn’t connected
to the external power supply.
3. The speed cam alert will only give alerts for speed camera points that have been set
by the user. To set a speed camera point push the add speed point icon when
your vehicle is close to a speed camera.
3.2.6 Speed Limit Alert
If the Speed Limit Alert function is enabled, the Car DVR will give voice alerts once your car’s location is determined by GPS
and the vehicles speed exceeds the set limit.
To set the Speed Limit Alert, follow the instructions below:
1. Touch to enter Main Menu
2. Touch to switch over to Driving Safety Main Menu.
3. Touch / to select to enter Speed Limit Alert menu.
4. Tap the / keys to set up a Speed Limit Alert to trigger the Car
DVR’s alarm (Off / 50 km/h ~ 200 km/h).
5. Touch to return to the record menu

19
6. If a Speed Limit Alert is set, the Car DVR will give a voice alert once your
car’s location is determined by GPS and its speed exceeds the set limit.
Note:
1. Speed Limit Alert is only active when satellite positioning is available. Make sure
GPS settings on your Car DVR is activated.
2. The Driving Safety functions such as LDWS, FCWS, Headlight Warning, Speed
Cam Alert, and Driver Fatigue Alert will be disabled if the product isn’t connected
to the external power supply.
3.2.7 Driver Fatigue Alert
If the Driver Fatigue Alert function is enabled, the Car DVR produces voice and
on screen alerts an hour after recording has started and will repeat the alerts
every half an hour afterwards.
To set the driver fatigue alert, follow the instructions below:
1. Touch to enter Main Menu
2. Touch to switch over to Driving Safety Main Menu.
3. Touch / to select to enter the Driver Fatigue Alert menu, then
touch (On) to activate Driver Fatigue Alert.
4. Touch to return to the record menu
Note:
The Driving Safety functions such as LDWS, FCWS, Headlight warning, Speed
Cam Alert and Driver Fatigue Alert will be disabled if the product isn’t connected to
the external power supply.
3.2.8 Parking Mode
Parking Mode can be set to trigger recording when your vehicle is parked and
powered off and an impact is detected via the G-Sensor or when movement
is captured in front of the camera lens via Motion Detection.
To set Parking Mode, please follow the steps below:
1. Touch to enter Main Menu.
2. Touch switch over to Driving Safety Main Menu.
3. Touch / to locate Parking mode, and touch the icon to enter
the Parking Mode menu.
4. In this menu you can touch the Motion Detection icon to activate. This will trigger a video recording if motion is
detected in front of the camera while your vehicle is parked and powered off.

20
5. By touching the Vibration Detection icon you can activate the
G-Sensor to trigger recording if your vehicle experiences an impact while it
is parked and powered off
6. Parking mode can be disabled by touching the Off icon.
7. Touch to return to record screen.
8. Once the accessories power on your vehicle is turned off, the message
“Wait for 10 seconds to enter Parking Mode, or touch screen to
power off.” will appear. The Car DVR will automatically enter Parking Mode
in 10 seconds, which enables the auto recording function if an impact is
detected or any object moving in front of the Car DVR is captured by the camera.
Note:
1. Each time Parking Mode is activated by G-Sensor or Motion Detection, the Car DVR will record for 60 seconds.
2. When the battery is fully charged, Parking Mode can record up to 30 minutes.
3. Parking Mode will still be active after the screen turns off.
3.2.9 Collision Detection (G Sensor)
The sensitivity of the Collision Detection function is set to medium by default.
The Car DVR will start an emergency recording once it detects any vibrations
caused by a collision.
To change the settings of Collision Detection:
1. Touch to enter Main Menu
2. Touch to switch over to Driving Safety Main Menu.
3. Touch / to select to enter the Collision Detection menu.
4. Touch the / keys to change the sensitivity of the Car DVR’s collision
detection (Off / Low Sensitivity / Normal Sensitivity / High Sensitivity).
5. Touch to return to the record menu
Note:
The emergency recording file is created as a new file, which will be protected to avoid
being overwritten by normal loop recording. 8GB (or above) SD Micro Cards can save
up to 10 emergency video files. The alert message of “Emergency files are full”
will appear on the screen when the emergency recording files are full, and the oldest
emergency file will be automatically deleted when a new emergency recording file is
created.