Katadyn MyBottle 8018087 User manual

Katadyn Products Inc.
83 , Switzerland
Phone: [phone]
[email protected]
www.katadyn.com
Print No. 8017667/1
Contact International
Katadyn MyBottle
Portable Water Purification System
Katadyn ViruPur Replacement Cartridge
(Model #8018087)
EN
DE
FR
NL
DK
SWE
NOR
FIN
IT
ESP
POR
Pfäffikerstrasse 37
10 Kemptthal

Thank you for choosing the Katadyn MyBottle Personal Water
Purification System
The Katadyn MyBottle water purification system eliminates the need to carry
or locate safe water, whether you are camping, hiking, paddling, fishing
or anytime safe water is required. The Katadyn MyBottle water purification
system places the advanced 3-layer ViruPur technology with an integrated
glass-fiber prefilter and an additional carbon postfilter into a standard water
bottle. The result is a water bottle that meets industry standards for reduction
of viruses (99.99%), bacteria (99.9999%) and cysts (99.9%) such as Giardia
and Cryptosporidium.
When to use
The Katadyn MyBottle water purification system is designed for use with
untreated fresh water sources, such as lakes, rivers and streams. It also
provides protection against waterborne pathogens that may still be present in
the tap water of many foreign countries.
The Katadyn Bottle purifier offers a convenient alternative to pump-style water
filters. Because it is designed for personal use, the Katadyn Bottle purifier is
not suitable for situations when large volumes of water must be treated.
HOW IT WORKS
The Katadyn MyBottle water purification system water bottle utilizes a multi-
stage filtration system. The first stage is an integrated 0.3 micron pleated
glassfiber prefilter that removes bacteria and protozoa like Giardia and
amoeba as well as particles larger than 0.3 microns. The second stage is the
3-layer ViruPur filter medium that adsorbs viruses and the smallest particles.
The third stage is a carbon postfilter that reduces organic contaminants and
unpleasant taste and odors.
Please read the following instructions carefully for maximum performance
from your Katadyn MyBottle water purifier. Failure to follow the instructions
found in this guide may result in unsafe drinking water!
English

KEY COMPONENTS
IMPORTANT NOTES
1. In order to be purified, water must pass through the ViruPur Cartridge. The
flow rate is slower than an ordinary sports water bottle in order to ensure
complete purification.
2. Squeeze and sip using continuous pressure. Do not pump. You will notice
a 2–4 seconds pause after squeezing, like using a long straw, before
water flows.
3. Always hold bottle upright when drinking. Water will not pass through the
cartridge if bottle is upside down or at an angle.
PRODUCT SET-UP (Before First Use)
1. Rinse inside of bottle
2. Assemble the cartridge
Attach the ViruPur Cartridge to the bottom of the Carbon Postfilter. Gently
twist each component while pushing it on. Make sure ALL O-rings and
components are fully sealed and assembled. Firmly twist and push the
Carbon Filter into the bottle cap (Figure 2).
Figure 1
Bottle Straw
Cushioned
mouth piece Bottle cap with
integral carry loop
Carbon Postfilter
ViruPur Cartridge with
integrated glass-fiber
Prefilter and removable
plastic sleeve
EN
151257-Kata-Interno_a 01/04/15 08.20 Pagina 1

3. Flush system (IMPORTANT!)
Before first use, flush system to remove harmless carbon dust from the
Postfilter. Fill bottle with water. Install bottle cap with assembled cartridge
on bottle and tighten. Squeeze bottle tightly with both hands until water
runs clear. The first squirt of water will be black from the carbon dust. This
is normal when flushing.
NORMAL OPERATION
1. Fill the bottle with water to the fill line
(Figure 2). Remember, the clearer the
water, the longer the integrated Prefilter
and Postfilter will last.
2. Insert cartridge/bottle cap into bottle.
Turn bottle cap clockwise until tight.
3. Flip open mouth piece. Note: The mouth
piece has two positions (Figure 3).
4. Hold the bottle upright when drinking.
Squeeze and sip using continuous pressure.
5. Press the mouth piece down after use to close the bottle.
6. Do not remove the mouth piece from its fixture.
NOTE: Before each use, flush and discard small amount of water to
remove stale taste. Refill bottle.
Figure 2
Open
Closed
Figure 3
Fill line
151257-Kata-Interno_a 01/04/15 08.20 Pagina 2

CARTRIDGE INSTALLATION
The MyBottle ViruPur microbial purification cartridge is for use with MyBottle
water purification system. Each replaceable ViruPur Replacement Cartridge
will treat up to 100 liters (26 gallons) of water.
CHECKING THE LIFESPAN OF THE MYBOTTLE VIRUPUR
MICROBIAL PURIFICATION CARTRIDGE
The MyBottle comes with a cartridge life counter. This integrated mechanism
inside the bottle cap indicates when to replace your ViruPur Cartridge.
a. Before each filling remove the cartridge/bottle cap from the bottle.
b. Remove the ViruPur Cartridge with the Postfilter from the cap and lay
aside.
c. Carefully rotate the life counter in a clockwise direction until it snaps into
the next position. This is best done holding the bottle cap in both hands.
d. When the life counter is back at the starting point it is time to replace the
cartridge.
e. Only use the included straw instead of purification cartridge if water
source has been treated and is safe for drinking (like most tap water).
Opening for straw Cartridge life counter
“START” position
Figure 4
EN
151257-Kata-Interno_a 01/04/15 08.20 Pagina 3

CHANGING THE MYBOTTLE VIRUPUR MICROBIAL
PURIFICATION CARTRIDGE
After 100 liters (26 gallons) or when bottle is hard to squeeze, use the
following steps to change the MyBottle purification cartridge:
a. Remove the cartridge/bottle cap from the bottle.
b. Remove the Carbon Postfilter and ViruPur Cartridge from the cap. Discard
cartridge components in trash receptacle.
c. Assemble the new cartridge (see step 2 of product set-up) and reset the
Cartridge life counter.
d. Flush system (see step 3 of product set-up).
REMOVABLE PLASTIC SLEEVE
The MyBottle ViruPur Cartridge comes with a removable plastic sleeve. Always
remove this plastic sleeve from the ViruPur Cartridge during periods of non-use
of the MyBottle to ease drying. To do this hold the top part of the purification
cartridge and carefully pull the sleeve down without touching the filter media.
When pushing the plastic sleeve back on gently put it over the filter media
and firmly twist and push the sleeve onto the top part of the ViruPur Cartridge.
CLEANING & STORAGE
Wash and dry the inside of the MyBottle thoroughly before using and
regularly during heavy periods of use. If using with safe water and without
the purification cartridge, the bottle must be completely disinfected to prevent
contamination from previous contact with contaminated water. The rubber
mouth piece cover may be removed for cleaning it thoroughly. Your MyBottle
and bottle cap are dishwasher safe (without the cartridge). Do NOT use soap
to clean the ViruPur Cartridge or the Carbon Filter.
For Long Term Storage (After Your Trip Is Over)
Disinfect the MyBottle water purification system to prevent microbiological
growth within the bottle.
1. Remove the cartridge/bottle cap from the bottle and disassemble ViruPur
Cartridge and Carbon Postfilter.
2. Shake out excess water from ViruPur Cartridge and Carbon Postfilter.
3. Remove the plastic sleeve from the ViruStat Cartridge without touching the
filter media and lay sleeve aside. Place the filter media in a solution of
151257-Kata-Interno_a 01/04/15 08.20 Pagina 4

1 part ethanol and 1 part water and let it soak for 30 minutes to prevent
bacterial growth. Remove.
4. Wash and dry bottle. Store empty bottle with cap on (without cartridges
installed).
5. Allow all filter components to dry thoroughly.
6. Store ViruPur Cartridge, plastic sleeve and Carbon Filter separately in
a cool, dry place or in a refrigerator (not in the freezer section).
Do NOT allow the purification cartridge to freeze with water in the cartridge.
Do NOT use with carbonated or flavoured beverages, as they may damage
the purification cartridge.
Do NOT disinfect the ViruPur Cartridge or the Carbon Postfilter with chlorine.
IMPORTANT
Please refer to the Important Notes and the Product Set-Up before using.
DISPOSAL
Do not reuse spent cartridges or filters; place in trash or offer for recycling if
available.
WHEN YOU TRAVEL ABROAD, CAMP OR BACKPACK…
…you run a risk of illness ranging from the inconvenience and discomfort of
diarrhea to more serious illnesses caused by protozoan cysts (i.e., Giardia,
Cryptosporidium), viruses and bacteria.
The microorganisms that cause these diseases are often found in the food
and water you consume. Lakes, streams and the local water supply may be
contaminated.
To minimize the risk of contracting these illnesses, we suggest that you consult
with your physician, state health department or travelers’ clinic 4–6 weeks
before you depart.
And while you are traveling…
– Make sure that prepared food is thoroughly cooked.
– Select non-cooked foods (fruits, nuts, etc.) that have intact shells or skins,
and clean your hands before peeling the food.
– Wash your hands with soap and water thoroughly and often, especially
EN
151257-Kata-Interno_a 01/04/15 08.20 Pagina 5

before you eat. Filter all drinking water with your Katadyn MyBottle water
purification system.
PRODUCT REGISTRATION
Please take a moment to register your new Katadyn product by completing
the short product registration form online at www.katadyn.com/
productregistration. The information you provide will enable us to better serve
you with products developed to meet your needs and interests. Register your
Katadyn product online and you will be automatically entered into a drawing
to win a free Katadyn product.
LIMITED WARRANTY
Your Katadyn MyBottle water purification system is warranted for two (2) years
from the date of purchase against defects in materials and workmanship.
Should your Katadyn MyBottle water purification system prove defective
within two years from the date of purchase, return it to the Katadyn retailer
from whom it was purchased. If you do not receive a satisfactory resolution,
contact Katadyn Customer Relations for service assistance. Katadyn, at its
discretion, will replace or repair the damaged item. Please retain purchase
receipt as proof of date purchased. This warranty gives you specific legal
rights and you may have other legal rights which vary from state to state.
CONTACT INTERNATIONAL
Katadyn Products Inc.
[phone]
[email protected]
www.katadyn.com
8310 Kemptthal/Switzerland ,
Pfäffikerstrasse 37
151257-Kata-Interno_a 01/04/15 08.20 Pagina 6