Kennedy KEN-405-2320K User manual

QUALITY GUARANTEE & WARRANTY
KENNEDY TOOLS carry a one year manufacturers warranty.
KENNEDY TOOLS are designed & manufactured
to the highest standards & specifications.
Assuring the quality and performance required by all sectors of industry.
KENNEDY TOOLS are fully guaranteed against
faulty materials & workmanship.
Should they be found to be defective, they will either be repaired or replaced
free of charge (fair wear and tear and/or misuse excepted).
This does not affect your legal rights.
Please retain supplier invoice as proof of purchase.
Kennedy Tools continually strives to improve its products. Specifications may change without prior notice.
KENNEDY TOOLS
Wigston Works, Leicester, England
Kennedy is a registered trade mark of The Kennedy Group Ltd.
© The Kennedy Group Ltd. 06/06
QUALITY KENNEDY AUTOMOTIVE PRODUCTS AVAILABLE FROM YOUR DISTRIBUTOR
ASSEMBLY INSTRUCTIONS
2-DRAWER WORK BENCH
www.kennedy-tools.co.uk
• Ideal for a range of workshop and industrial applications.
• Professional quality, heavy gauge steel construction for
sturdy long-term use.
• Smooth glide drawer runners.
• Powder coated finish.
• Quick and easy to assemble.
• With 2 lockable drawers.
• Storage shelf.
• Net weight 70.9 kg.
• Dimensions 1500mm x 640mm x 865mm (W x D x H).
KEN-405-2320K

2. Fit shelf unit in position using two bolt and nut combinations per corner.
Do not attempt this operation single handedly.
3. Slide the drawers into the drawer housings beneath the work top.
If it is necessary to remove the drawer at any time, locate the drawer retaining mechanism
under the bench top and push it upwards, while gently sliding the drawer forward. Take care
not to trap your fingers when sliding the drawer forward.
ASSEMBLY INSTRUCTIONS
Tools required: Two combination spanners, sizes 13mm and 14mm.
1. Position the work bench top face down on a solid surface, allowing yourself plenty of room to
assemble the bench. Attach the bench legs using four bolt and nut combinations per leg (see Fig 1).
BOX CONTENTS
SAFETY GUIDELINES
Bench top (1) Bench Legs (4) Shelf (1)
Drawers (2) M8 Nuts (24)M8x55 Bolts (24)
Figure 1
Figure 2
Figure 3
Due to the weight of this piece of equipment, it is necessary to
employ two people in building and manoeuvring the work bench.