KEPCO JQE 6-90 User manual

MODEL
O P E R ATO R ’ S M A N U A L
IMPORTANT NOTES:
1) This manual is valid for the following Model and associated serial numbers:
MODEL SERIAL NO. REV. NO.
2) A Change Page may be included at the end of the manual. All applicable changes and
revision number changes are documented with reference to the equipment serial num-
bers. Before using this Instruction Manual, check your equipment serial number to identify
your model. If in doubt, contact your nearest Kepco Representative, or the Kepco Docu-
mentation Office in New York, [phone], requesting the correct revision for your par-
ticular model and serial number.
3) The contents of this manual are protected by copyright. Reproduction of any part can be
made only with the specific written permission of Kepco, Inc.
Data subject to change without notice.
KEPCO®
THE POWER SUPPLIER™
KEPCO, INC. z131-38 SANFORD AVENUE zFLUSHING, NY. 11355 U.S.A. zTEL [phone] zFAX [phone]
email: [e-mail] zWorld Wide Web: http://www.kepcopower.com
KEPCO INC.
An ISO 9001 Company.
©2010, KEPCO, INC.
P/N 228-1732
JQE FULL RACK
POWER SUPPLY
INCLUDES MODEL SUFFIX E, HS, L, M, T, VP
1000W
JQE 6-90, JQE 15-50,
JQE 25-40, JQE 36-30,
JQE 55-20, JQE 75-15,
JQE 100-10, JQE 150-7

228-1783 Dec of Conf JQE 100W, 250W, 500W, 1000W A
Declaration of Conformity
Application of Council directives: 2006/95/EC (LVD)
2004/108/EC (EMC
Standard to which Conformity is declared:
IEC61010-1, 3rd Edition Safety requirements for electrical equipment for
measurement, control, and laboratory use
(designed to meet)
EN55011 (Class A, conducted and radiated)
(radiated is designed to meet) Limits and Methods of Measurement of Radio Disturbance Characteristics of Information
Technology Equipment
EN61000-4-11, EN61000-4-4 Level 3,
EN61000-4-2 Level 4, EN61000-4-5 Level 4.
Designed to meet: IEC61000-3-3, IEC61000-4-3,
IEC61000-4-6, IEC61000-4-8.
Voltage Dips, Fast Transient EFT,
ESD Level 4, Surge Immunity Criteria B, Flicker
(designed to meet), Radiated Immunity (designed
to meet), Conducted Immunity, Magnetic Field
Immunity (designed to meet)
Manufacturer's Name:
Manufacturer's Address: KEPCO, INC. 131-38 SANFORD AVENUE
FLUSHING NY 11355
USA
Importer's Name:
Importer's Address:
Type of Equipment: Component Power Supply
Model Series JQE 100W, 250W (1/4 Rack)
500W (1/2 Rack), 1000W (Full
Rack), all models, all
options
Model No.:
Year of Manufacture:
I, the undersigned, declare that the product specified above, when used in
conjunction with the conditions of conformance set forth in the product
instruction manual, complies with the requirements of the Low Voltage Directive
2006/95/EC, which forms the basis for application of the CE Mark to this
product.
Place: Kepco, Inc.
131-38 Sanford Ave.
Flushing NY 11355
USA
Date:
Mark Kupferberg
(Full Name)
Executive Vice President
(position)