KERN MSA 80 User manual

KERN & Sohn GmbH
Ziegelei 1
D-72336 Balingen
email: [email protected]om
Phone: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.kern-sohn.com
Operating instructions
Electronic height-measuring rod
KERN MSA 80
Version 1.0
10/2009
GB
MSA_80-BA-e-0910

GB KERN MSA 80
Version 1.0 10/2009
Operating instructions
Electronic height-measuring rod
Table of Contents
1Device overview............................................................................................. 3
2Technical Data ............................................................................................... 4
3Declaration of conformity ............................................................................. 5
4Basic instructions.......................................................................................... 6
5Unpacking / Scope of delivery...................................................................... 7
6How to insert the batteries............................................................................ 8
7Assembly on baby scales KERN MBB ......................................................... 9
8Operation...................................................................................................... 11
9Cleaning, Maintenance, Disposal ............................................................... 14
2 MSA_80-BA-e-0910

1 Device overview
1. Measuring rod
2. Display unit
3. Caliper gauge/Heel stop
4. Head stop
MSA_80-BA-e-0910 3

4 MSA_80-BA-e-0910
2 Technical Data
´
KERN MSA 80
Measuring range 35 – 80 cm
Readability 1 mm
tolerance 5 mm
Units cm ft/inchinch
Battery 2 x 1.5 V AAA
Operating period 600 h
Automatic cutout after 60 s
Measurements (W x H x D) mm,
folded 625 x 295 x 70
Net weight 0.6 kg
Combinable scales KERN MBB

3 Declaration of conformity
KERN & Sohn GmbH
D-72322 Balingen-Frommern
Postbox 4052
email: [email protected]
Phone: 0049-[0]7433- 9933-0
Fax: 0049-[0]7433-9933-149
Internet: www.kern-sohn.de
Declaration of conformity
EC-Konformitätserklärung EC-Declaration of -Conformity
EC- Déclaration de conformité EC-Declaración de Conformidad
EC-Dichiarazione di conformità EC-Conformiteitverklaring
EC- Declaração de conformidade EC- Prohlášení o shode
EC-Deklaracja zgodności EC-Заявление осоответствии
EN Konformitäts-
erklärung
Wir erklären hiermit, dass das Produkt, auf das sich diese Erklärung bezieht,
mit den nachstehenden Normen übereinstimmt.
GB Declaration of
conformity
We hereby declare that the product to which this declaration refers conforms
to the following standards.
CZ Prohlášení o
shode
Tímto prohlašujeme, že výrobek, kterého se toto prohlášení týká, je v souladu
s níže uvedenými normami.
E Declaración de
conformidad
Manifestamos en la presente que el producto al que se refiere esta
declaración está de acuerdo con las normas siguientes
F Déclaration de
conformité
Nous déclarons avec cela responsabilité que le produit, auquel se rapporte la
présente déclaration, est conforme aux normes citées ci-après.
I Dichiarazione di
conformitá
Dichiariamo con ciò che il prodotto al quale la presente dichiarazione si
riferisce è conforme alle norme di seguito citate.
NL Conformiteit-
verklaring
Wij verklaren hiermede dat het product, waarop deze verklaring betrekking
heeft, met de hierna vermelde normen overeenstemt.
P Declaração de
conformidade
Declaramos por meio da presente que o produto no qual se refere esta
declaração, corresponde às normas seguintes.
PL Deklaracja
zgodności
Niniejszym oświadczamy, że produkt, którego niniejsze oświadczenie
dotyczy, jest zgodny z poniższymi normami.
RUS Заявление о
соответствии
Мы заявляем, что продукт, ккоторому относится данная декларация,
соответствует перечисленным ниже нормам.
Height rod: KERN MSA 80, MSD 200, MSE 210
EU Directive Standards
2004/108/EC
EMC
EN 61000-6-3 : 2007, CISPR 16-2-3: 2003
EN 61000-6-1 : 2007
IEC61000-4-2: 1995+A1 : 1998+A2: 2000
IEC61000-4-3: 2008
IEC61000-4-8 : 1993+A1 : 2000
2006/95/EC LVD EN 60950 : 2006
Date: 22.09.2009 Signature:
Gottl. KERN & Sohn GmbH
Management
Gottl. KERN & Sohn GmbH, Ziegelei 1, D-72336 Balingen, Tel. +49-[0]7433/9933-0,Fax +49-[0]7433/9933-149
MSA_80-BA-e-0910 5

4 Basic instructions
Carefully read this operation manual before setup and
commissioning, even if you are already familiar with KERN
products.
Staff training The medical staff must apply and follow the operating
instructions for proper use and care of the product.
Safety
Instructions
•Assemble height measuring rod only on KERN MBB.
•Please use no other than the supplied fixtures for mounting.
•Ensure that mounting was carried out correctly and that all
screws have been tightened properly, see chapter 7
“Assembly”.
•When moving the height measuring rod ensure that the
person to be measured can not be injured
•Reliable values of body height measurements are only
achieved if the heel, back and head are aligned in a straight
line. Please note that the body height of a person may vary
by several cm as the day progresses.
Test device
control
We recommend a metrological examination of the accuracy of
the measuring rod, however, this is not mandatory as the
determination of human body height involves rather large,
intrinsic inaccuracies.
6 MSA_80-BA-e-0910

5 Unpacking / Scope of delivery
Testing upon
acceptance
Please check packaging as well as the device on receipt for
possibly visible external damages.
Packaging/
Return
Keep all parts of the original packaging for a possibly required
return.
Only use original packaging for returning.
Scope of supply For height measuring rod, see chapter 1
Batteries, 2 x 1.5 V AAA
Assembly plate, see chap. 7 „Assembly“
2 off
Screw [A], see chap. 7 „Assembly“
2 off
Screw [B], see chap. 7 „Assembly“
Operating instructions
MSA_80-BA-e-0910 7

6 How to insert the batteries
Prior to initial use, insert the batteries as follows:
1. Remove the battery cover as shown on the illustration
2. Insert 2 x 1.5 V AAA batteries. Pay attention to correct
polarity.
3. Reattach the battery cover.
To save battery power, the device auto-disconnects automatically
after 60 seconds have passed without a change of display.
If the device is not used for a longer time, take out the batteries
and store them separately. Leaking battery liquid could damage
the device.
Low batteries are indicated by the message “lo“. Change the
batteries as described above.
8 MSA_80-BA-e-0910

7 Assembly on baby scales KERN MBB
1. Turn-over the balance. If assembled, remove weighing
plate by loosening the screws.
2. Apply assembly plate acc. to fig. on the height measuring rod.
Ensure that the fixing point engages.
3. Fasten the assembly plate using screws [A]. Screw height
measuring rod on the weighing plate [B].
[B]
[A]
MSA_80-BA-e-0910 9

4. Assemble again weighing plate (see item 1.).
5. Turn over, balance and height measuring rod are ready for
operation.
10 MSA_80-BA-e-0910