Kilotech KPC 1500SS Use and care manual

www.kilotech.com
KPC 1500SS, Operaons & Calibraon Manual E 02022018, Page 1 of 5
KPC 1500SS
851295
MAN02022018
Operations and Calibration Manual
Contents subject to change without notice

KPC 1500SS, Operaons & Calibraon Manual E 02022018, Page 2 of 5
Introduction
Thank you for choosing a Kilotech Scale. We appreciate your business and hope that you will enjoy using your
scale. Should you require Technical Support, please contact your local dealer from whom you have purchased.
Avoid lengthy exposure to heat or cold Allow the scale to acclimate to normal room temperature
before use
 Turn the scale on and wait for a few minutes to allow the
internal components a chance to stabilize before weighing
Do not leave a load or weight on a scale for a prolonged

Might damage load cell
Do not tamper with the scale yourself This will void the warranty. Contact your local distributor or
Kilotech directly to properly repair your scale
Do not overload beyond the maximum weight limit
Do not pull the plug by its cord when unplugging

Unless the scale is waterproof do not spill water or immerse
in water
Avoid placing the scale near a heater 
Always make sure to use a Kilotech approved adapter
Do not drop the scale or apply a sudden shock
Do not drag the scale
 These devices emit RF and can cause unstable readings. If
your scale should perform poorly, try moving the scale to a

Level the scale or make sure it is on an even surface A scale used on an uneven surface may provide an unstable
reading
Scale should be used within stated temperature
& humidity limits
General Precautions

KPC 1500SS, Operaons & Calibraon Manual E 02022018, Page 3 of 5
Product Number 851295
 5 kg x 0.0005 kg / 5000 g x 0.5 g / 11 lb x 0.001 lb /
176 oz x 0.02 oz / 11 lb x 16.02 oz
Weighing Modes kg / g / lb / oz and lb-oz
Display Large Digital Display (1.25"/25 mm)
 

Power 
Product Dimensions 10.1"x 8.1"x 2.7"
 6.5"x 7"stainless steel
 
Specifications

KPC 1500SS, Operaons & Calibraon Manual E 02022018, Page 4 of 5
ON
OFF ON/OFF:
• Press this key to turn ON or OFF.
ZERO
ZERO (TARE):
 
container for example).
UNIT
UNIT:
• Press this key to toggle between weighing modes available.
PCS:
 
1. COUNTING FUNCTION
1. Turn the scale on.
2.  
 The display will show either 10, 20, 50, or 100. (Press the UNIT key to toggle.)
  

5. 
6.  
2. TARE FUNCTION
1.  
2.  
 Put items to be weighed in the container. Only the weight of the items will be displayed.
  
5.  

KPC 1500SS, Operaons & Calibraon Manual E 02022018, Page 5 of 5
3. CALIBRATION (refer to online video)
 
2. Make sure the scale is OFF.
 
 
 
 
 
 
9. Press the UNIT key.
10. The display will show several dashes (- - - - -) and then the A/D value.
11. Remove the weight.
 
 
 
 
 
a. Try a more stable surface
 
 
 
4. FUNCTION SETTING
1.  
2.  
  
Auto shut o mode
• 
• 
Auto backlight mode
• 
• 
• 
Return to weighing mode

