Kiloview E1 Series User manual

高清视频编码器
USER MANUAL
For E1/E2/G1/G2/M2/IU series encoders
Changsha KILOVIEW Electronics CO.,LTD.

Legal Notices
Subject to the receiving of this document from Changsha Kiloview Electronics Co., Ltd.,(Hereinafter
referred to “Kiloview”), the following terms are understood and agreed. Or else, please stop using this
document.
This document is copyright of Kiloview, all rights reserved. The document covers the proprietary
information of the company. No company or individual may copy, transmit, distribute, use or disclose the
document and any images, forms, data and other information contained in the document without the
prior written permission of the company.
is the registered trademark of Kiloview. The name and logo are the trademarks or registered
trademarks of the company. Other products or company names mentioned in this document may be the
trademarks or registered trademarks of their respective owners. The reading of this document without
the prior written consent of the company or the third party rights holder does not imply that the reader
is given any right to use any of the marks appearing in this document by implication, non-evidence or
otherwise.
This product complies with the design requirements related to environmental protection and personal
safety. The storage, usage and disposal of the product shall be in accordance with the product manual,
relevant contract or relevant national laws and regulations.
This document is provided "as is" and "only in this state". Products and technical updates are subject to
change without prior notice.
For matters not covered in this document, please visit our website www.kiloview.com for information
and technical support.

CONTENTS
1 PRODUCT INTRODUCTION.......................................................................................................................................................... 1
1.1 E SERIES WIRED VIDEO ENCODER...................................................................................................................................................1
1.1.1 Advantages.................................................................................................................................................................... 1
1.1.2 Parameters.....................................................................................................................................................................2
1.2 G SERIES WIRELESS VIDEO ENCODER.............................................................................................................................................. 3
1.2.1 Advantages.................................................................................................................................................................... 3
1.2.2 Parameters.....................................................................................................................................................................4
1.3 M2 WIRED VIDEO ENCODER.........................................................................................................................................................5
1.3.1 Advantages.................................................................................................................................................................... 5
1.3.2 Parameters.....................................................................................................................................................................6
1.4 1U SERIES RACK-MOUNTED VIDEO ENCODER...................................................................................................................................7
1.4.1 Advantages.................................................................................................................................................................... 7
1.4.2 Parameters.....................................................................................................................................................................8
2 OPERATION GUIDANCE............................................................................................................................................................... 9
3 PACKING LIST AND INTERFACE DESCRIPTION...........................................................................................................................10
3.1 PACKING LIST.......................................................................................................................................................................... 10
3.2 DEVICE INTERFACES.................................................................................................................................................................. 10
3.3 LED INDICATOR DESCRIPTIONS................................................................................................................................................... 13
4 INSTALLATION AND CONNECTION............................................................................................................................................ 13
4.1 E/G SERIES INSTALLATION AND CONNECTION................................................................................................................................ 13
4.1.1 Connect the power adapter......................................................................................................................................... 13
4.1.2 Connecting video signal............................................................................................................................................... 14
4.1.3 Connect network.......................................................................................................................................................... 14
4.1.4 Connect WIFI antenna (for wireless encoder only)...................................................................................................... 14
4.2 M2 INSTALLATION AND CONNECTION.......................................................................................................................................... 14
4.2.1 Connect the power adapter......................................................................................................................................... 14
4.2.2 Connecting video signal............................................................................................................................................... 15
4.2.3 Connect network.......................................................................................................................................................... 15
4.3 1U SERIES INSTALLATION AND CONNECTION..................................................................................................................................15
4.3.1 Connect the power adapter......................................................................................................................................... 15
4.3.2 Connecting video signal............................................................................................................................................... 16
4.3.3 Connect network.......................................................................................................................................................... 16
5 LOGIN AND NETWORK CONFIGURATION................................................................................................................................. 17
5.1 LOGIN TO THE DEVICE THROUGH ETHERNET.................................................................................................................................. 17
5.2 LOG IN TO THE DEVICE THROUGH THE WIFI HOTSPOT（ONLY GSERIES WIRELESS ENCODERS）............................................................18
5.3 NETWORK CONFIGURATION........................................................................................................................................................18
5.3.1 Ethernet....................................................................................................................................................................... 18
5.3.2 WIFI network (Only G series wireless encoders).......................................................................................................... 19
5.3.3 4G Network (Only for G series encoders).....................................................................................................................22
5.3.4 Convenient management functions.............................................................................................................................23

5.3.5 Android APP................................................................................................................................................................. 24
6 PARAMETERS CONFIGURATION................................................................................................................................................ 26
6.1 DASHBOARD........................................................................................................................................................................... 26
6.2 BASIC SETTINGS....................................................................................................................................................................... 27
6.2.1 Change WEB login password....................................................................................................................................... 27
6.2.2 Location and time........................................................................................................................................................ 28
6.2.3 Restore factory settings............................................................................................................................................... 29
6.2.4 Firmware upgrading.................................................................................................................................................... 29
6.3 VIDEO & AUDIO ADJUSTMENTS.................................................................................................................................................. 30
6.3.1 Video source choice and adjustments......................................................................................................................... 30
6.3.2 Video preprocessing.....................................................................................................................................................30
6.3.3 Audio signal source...................................................................................................................................................... 32
6.4 ENCODING & STEAM................................................................................................................................................................ 32
6.4.1 Audio encoding parameter setting.............................................................................................................................. 32
6.4.2 Encoding and stream settings......................................................................................................................................33
6.4.3 Streaming media service..............................................................................................................................................35
6.4.3.1 Motion JPEG stream.................................................................................................................................................................. 35
6.4.3.2 RTSP service...............................................................................................................................................................................35
6.4.3.3 RTMP Pushing (Live streaming)................................................................................................................................................. 37
6.4.3.4 TS-UDP Pushing (unicast and multicast)....................................................................................................................................39
6.4.3.5 HLS service.................................................................................................................................................................................41
6.4.3.6 SRT-TS pushing...........................................................................................................................................................................42
6.5 LOCAL RECORDING................................................................................................................................................................... 44
6.6 NETWORK STORAGE（NAS）...................................................................................................................................................47
6.7 TEXT/ IMAGE/TIME OVERLAY......................................................................................................................................................48
6.7.1 Overlay Image Management.......................................................................................................................................49
6.7.2 Overlay function...........................................................................................................................................................49
6.8 SERVICE CONFIGURATION..........................................................................................................................................................52
6.8.1 Web Service Configuration.......................................................................................................................................... 52
6.8.2 Onvif Service Configuration......................................................................................................................................... 52
6.8.3 Telnet Service Configuration........................................................................................................................................ 53
6.9 SERIAL PORTS AND PTZ............................................................................................................................................................ 53
6.9.1 Serial Ports................................................................................................................................................................... 53
6.9.2 PTZ Setting................................................................................................................................................................... 54
6.9.3 Control Panel................................................................................................................................................................54
6.10 QUICK RESET AND REBOOT......................................................................................................................................................54
6.10.1 Quick Reset................................................................................................................................................................ 54
6.10.2 Reboot........................................................................................................................................................................55
6.11 LOGS AND DEBUG..................................................................................................................................................................55
6.12 PRESET CONFIGURATION........................................................................................................................................................56

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
1
1 Product introduction
1.1 E series wired video encoder
E series video encoder can encode SDI or HDMI video source and compress into IP stream, to realize
long-distance HD transmission/live broadcast over WAN or LAN network.
1.1.1 Advantages
High bandwidth adaptability, makes it possible to transmit high definition, low-latency,
non-padding image under low bit network.
With branded chips solution together with video dynamic noise reduction and image enhancement
technology, it can realize good encoding image under low bit transmission;
Good video image can be achieved at 1Mbps@720p, 1.5Mbps@1080p network;
Advanced video buffering technology and FEC technology ensures video encoding delay ≤ 67ms and
stable and smooth transmission;
Adjustable bit rate from 64kbit/s～40Mbit/s.
Powerful streaming media service function, supports RTSP/RTMP/UDP-TS/Onvif/SIP/SRT and
some other protocols.
SRT/ RTSP/ RTMP/ HLS/ UDP-TS/ Onvif and some other streaming media protocols supported for
live broadcast on Facebook, YouTube, Ustream, Twitch, Wowza etc or security platform /NVR
system;
Dual stream output, the main code rate up to 1080p60Hz, and the sub-stream supports 720p60Hz
video encoding.

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
2
Portable and low power consumption makes it 24 hours continuous working available.
Capable with customized text and image overlay function, which can be at any position on the
screen;
Audio embedding encoding supported, with voice intercom function (need to deploy voice intercom
software);
Supports NAS network storage;
With video real-time loop function, there is no delay and convenient for live monitoring;
24h continuous working available.
Note: (≤67ms) refers to the delay of the encoder end, and the end-to-end delay also relates to
network, decoding, etc.
1.1.2 Parameters
Model E1 (SDI),E2 (HDMI)
Video input 1*BNC SDI (E1); 1*HDMI (E2)
Video Loop out 1*BNC SDI (E1); 1*HDMI (E2)
Analog audio input 2*3.5mm
USB interface 2*USB 2.0 Type-A; 1*USB 2.0 Mini-USB
Network Support RJ-45 Ethernet
Media transmission
protocols RTMP/HLS/TS over UDP/RTSP /Onvif/SRT
Video resolution
Up to 1080P60Hz, resolutions supported:
E1: 1080p23.98/24/25/29.97/30Hz, 1080p50/59.94/60Hz,
1080i50/59.94/60Hz, 720p23.98/24/25/29.97/30Hz, 720p50/59.94/60Hz
E2: 1080p23.98/24/25/29.97/30Hz, 1080p50/59.94/60Hz,
1080i50/59.94/60Hz, 720p30/50/59.94/60Hz.
Video coding H264/AVC, Motion-JPEG
Audio coding AAC/G.711
Encoding latency ≤67ms
Image and text
overlay
Custom text, image overlay function, can be superimposed to any position on the
screen
Recording Micro SD/TF card , local recording, NAS network storage
Management WEB/Android APP
Power
supply/consumption DC 12V 1A / 4W
Operating
temperature 125*89*28mm / 380g
Size/Weight -20℃~55℃

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
3
1.2 G series wireless video encoder
G series video encoder can encode SDI or HDMI video source and compress into IP stream, to realize
long-distance HD transmission/live broadcast over WAN or LAN network.
1.2.1 Advantages
Built-in WIFI module, wireless video transmission/live broadcast supported.
Built-in dual-band (2.4G/5.0GHz) WIFI module, it supports wireless transmission/ live broadcast of
mobile video sources in local space;
Built-in self-adaptive Ethernet interface, wired network transmission is also supported;
Low power consumption, 24 hours continuous working available.
Powerful streaming media service function, supports RTSP/RTMP/TS/Onvif/SIP/SRT and some
other protocols.
Dual stream output, the main code rate up to 1080p60Hz, and the sub-stream supports 720p 60Hz
video encoding.
Capable with customized text and image overlay function, which can be at any position on the
screen;
Audio embedding encoding supported, with voice intercom function (need to deploy voice intercom
software);
Supports NAS network storage;
With video real-time loop function, there is no delay and convenient for live monitoring.

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
4
High bandwidth adaptability makes it possible to transmit high-definition, low-latency,
non-padding image under low bit network.
With branded chips solution together with video dynamic noise reduction and image enhancement
technology, it can realize good encoding image under low bit transmission;
Good video image can be achieved at 1Mbps@720p, 1.5Mbps@1080p network;
Advanced video buffering technology and FEC technology ensures video encoding delay ≤67msand
stable transmission;
Adjustable bit rate from 64kbit/s～40Mbit/s.
Note: (≤67ms) refers to the delay of the encoder end, and the end-to-end delay also relates to
network, decoding, etc.
1.2.2 Parameters
Model No. G1, G2
Input 1*BNC SDI (G1); 1*HDMI (G2)
Video Loop out 1*BNC SDI (G1); 1*HDMI (G2)
Analog audio input 2*3.5mm
USB interface 2*USB 2.0 Type-A
Network Support Enhanced WIFI (Enhance 5.0GHz frequency), RJ-45 Ethernet
Media transmission
protocols RTMP/HLS/TS over UDP/RTSP /Onvif/SRT
Video resolution
Up to 1080P60Hz, resolutions supported:
G1: 1080p23.98/24/25/29.97/30Hz, 1080p50/59.94/60Hz,
1080i50/59.94/60Hz, 720p23.98/24/25/29.97/30Hz, 720p50/59.94/60Hz
G2: 1080p23.98/24/25/29.97/30Hz, 1080p50/59.94/60Hz,
1080i50/59.94/60Hz, 720p30/50/59.94/60Hz.
Video coding H264/AVC, Motion-JPEG
Audio coding AAC/G.711
Encoding latency ≤67ms
Image and text
overlay
Custom text, image overlay function, can be superimposed to any position on the
screen
Recording Micro SD/TF card , local recording, NAS network storage
Management WEB/Android APP
Power
supply/consumption DC 12V 1A / 4W
Size/Weight 125*89*28mm / 380g
Operating
temperature -20℃~55℃

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
5
1.3 M2 wired video encoder
M2 video encoder can encode VGA/HDM video source and compress into IP stream, to realize
long-distance HD transmission/live broadcast over WAN or LAN network.
1.3.1 Advantages
Dual interface design, compatible with various VGA video sources or HDMI video sources.
VGA interface compatible with VGA/ XGA/ UVGA/ SVGA/ SXGA/SXGA+/ WXGA/ WXGA+/ WSXGA/
WUXGA and other video sources;
HDMI interface compatible with HDMI1.4 and below;
24h continuous working available.
Powerful streaming media service function, supports RTSP/RTMP/TS/Onvif/SIP/SRT and some
other protocols
SRT/ RTSP/ RTMP/ HLS/ TS/ Onvif and some other streaming media protocols supported for live
broadcast on Facebook, YouTube, Ustream, Twitch, Wowza etc or security platform /NVR system;
Dual stream output, the main code rate up to 1080p60Hz, and the sub-stream supports 720p 60Hz
video encoding.
Capable with customized text and image overlay function, which can be at any position on the
screen;
Supports NAS network storage.


Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
6
High bandwidth adaptability makes it possible to transmit high-definition,low-latency,
non-padding image under low bit network.
With branded chips solution together with video dynamic noise reduction and image enhancement
technology, it can realize good encoding image under low bit transmission;
Good video image can be achieved at 1Mbps@720p, 1.5Mbps@1080p network;
Advanced video buffering technology and FEC technology ensures video encoding delay ≤67ms and
stable transmission;
Adjustable bit rate from 64kbit/s～40Mbit/s.
Note: (≤67ms) refers to the delay of the encoder end, and the end-to-end delay also relates to
network, decoding, etc.
1.3.2 Parameters
Model No. M2
Input 1*VGA+1*HDMI
Analog audio input 2*3.5mm
USB interface 2*USB 2.0 Type-A
Network Support RJ-45 Ethernet
Media transmission
protocols RTMP/HLS/TS over UDP/RTSP /Onvif/SRT
Video resolution
Up to 1080P60Hz, details as below:
1080p/1080i/720p/480p/576p/480i/576i(up to 60Hz)
Compatible with VESA display resolution, up to 1920*1200@60Hz
Video coding H264/AVC, Motion-JPEG
Audio coding AAC/G.711
Encoding latency ≤67ms
Image and text
overlay
Custom text, image overlay function, can be superimposed to any position on the
screen
Recording local recording, NAS network storage
Management WEB/Android APP
Power
supply/consumption DC 12V 1A / 4W
Operating
temperature 125*89*28mm / 380g
Size/Weight -20℃~55℃

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
7
1.4 1U series rack-mounted video encoder
The rack-mounted encoder refers to an integrated single, quad or multi-channel SDI/HDMI video
encoding module in a 1U/3U rack-mount frame through plug-in card. Through wired network to realize
remote video transmission / live broadcast.
1.4.1 Advantages
Highly integrated, low power consumption, stable operation
It can integrate 1U single-channel, 1U four-channels, or 3U multi-channels SDI/ HDMI video
encoding module, and supports up to 32-channels in 3U rack. SDI encoding module and HDMI
encoding module can be integrated into the same rack for customization;
Advanced low-power consumption design (150w only for 32 channels at full load), together with
built-in intelligent cooling device, it can ensure stable operation, makes 24h continuous working
available.
High bandwidth adaptability, it can transmit high-definition, low-latency image without padding
even under a low-bandwidth network environment
With branded chips solution together with video dynamic noise reduction and image enhancement
technology, it can realize good encoding image under low bit transmission;
Good video image can be achieved at 1Mbps@720p, 1.5Mbps@1080p network. In the normal
scene, 1Mbps@720p, 1.5Mbps@1080p can get high quality video quality;
Advanced video buffering technology and FEC technology ensures video encoding delay ≤67ms and
transmission stable without non-padding.
Adjustable bit rate from 64kbit/s～40Mbit/s.
Note: (≤67ms) refers to the delay of the encoder end, and the end-to-end delay also relates to
network, decoding, etc.

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
8
Powerful streaming media service function, all types of streaming media protocol supported
SRT/ RTSP/ RTMP/ HLS/ TS/ Onvif and some other streaming media protocols supported for live
broadcast on Facebook, YouTube, Ustream, Twitch, Wowza etc or security platform /NVR system;
Dual stream output, the main code rate up to 1080p60Hz, and the sub-stream supports 720p 60Hz
video encoding.
1.4.2 Parameters
Model U1-1; U2-1; U1-4; U2-4
Video interface U1-1: 1*BNC SDI; U2-1: 1*HDMI; U1-4: 4*BNC SDI; U2-4: 4*HDMI
Video loop U1-1: 1*BNC SDI; U2-1: 1*HDMI; U1-4: 4*BNC SDI; U2-4: 4*HDMI
Network Support Wired Ethernet
Media transmission
protocols RTMP/HLS/TS over UDP/RTSP /Onvif/SRT
Video resolution Supports up to 1080P60Hz resolution
Video coding H264/AVC, Motion-JPEG
Audio coding AAC/G.711
Encoding latency ≤67ms
Image and text
overlay
Custom text, image overlay function, can be superimposed to any position on the
screen
Recording NAS network storage
Management WEB
Power
supply/consumption AC 220v 25W/U series: up to 25W
Operating
temperature 483*175.25*44.5mm/1.6kg
Size/Weight -20℃~55℃

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
9
2 Operation guidance
Installation and connection of the device
Connect the power and video input source correctly, power on the device.
Network Connection and Configuration
If you want to set up the network manually, when using wired connection mode, you can use the device
failsafe IP address (192.168.1.168) to login the WEB page for setting up; At the same time, for
convenience of operation, you can also connect the device's own WIFI hotspot to configure device
through other WIFI terminal, such as mobile phone or pad. If you use the wireless network push flow,
you must first log on to the device web Page to set up WIFI.
RTSP pull flow
The decoder's RTSP stream is directly pulled using a decoder or a PC-side player (such as VLC), and the
RTSP stream service is continuously turned on.
Other streaming service
If necessary, you can also configure the device to push video streams such as RTMP, RTMPS, UDP, HLS,
etc.

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
10
3 Packing list and interface description
3.1 Packing list
E/G/M Series packing list
Name Unit Quantity Note
Encoder PCS 1
E1&G1:SDI Input
E2&G2:HDMI Input
M2:HDMI&VGA Input
WIFI Antenna PCS 2 Only for G series wireless encoders
DC12V/1A power adaptor PCS 1
Quick start guide PCS 1
Certificate/Warranty card PCS 1
1U rack packing list
Name Unit Quantity Note
Encoder PCS 1 U1:SDI Input; U2:HDMI Input
AC 220v Power cable PCS 1
Quick start guide PCS 1
Certificate/Warranty card PCS 1
3.2 Device interfaces
E/G Series device interfaces
1, Power input 2, Mini-USB 3, Audio output 4, Audio Line in
5,SDI IN/HDMI LOOP 6,SDI LOOP/HDMI IN 7,100M Ethernet interface 8,Status leds

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
11
9, USB interface 10, Micro SD/TF Card 11, Power Switch 12, Reset
13, WIFI Antenna (for wireless encoder only)
M2 device interfaces
1, Dial switch (for custom development only) 2, Reset 3, Power input
4, Audio output 5, Audio line in 6, RS-485 Interface 7, VGA IN
8, HDMI IN 9, 100M Ethernet interface 10, USB interface

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
12
1U Single/multiple device interfaces
1, Mini USB 2, Audio output 3, Audio line in 4, HDMI LOOP/SDI IN
5, SDI LOOP/HDMI IN 6, 100M Ethernet interface 7, Status leds
8, Reset 9, AC 220V Power input 10, Power Switch
1, Mini USB 2, Audio output 3, Audio line in 4, HDMI LOOP/SDI IN
5, SDI LOOP/HDMI IN 6,100M Ethernet interface 7, Status leds
8, Reset 9, AC 220V Power input 10, Power Switch

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
13
3.3 LED indicator descriptions
E/G/M/1U LED indicator status
4 Installation and Connection
4.1 E/G series installation and connection
4.1.1 Connect the power adapter
Using the power adapter (DC 12v) connect to the main product, after the power is turned on, then the
product starts working immediately.
Note: Please use the standard power adapter provided. Using other unqualified power supplies
may damage the device.
Name Color Status Description
POWER Red
Always on Power supply is connected
Flashing Power failure
Off Power supply is not connected
SIGNAL
Green
Always on SDI/HDMI signal is connected
Flashing Restore device to factory settings
Off SDI/HDMI signal is not connected
RUN
Green
Always on Device is starting
Flashing Restore device to factory settings
Off Working abnormal/not started

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
14
4.1.2 Connecting video signal
Connect the SDI/HDMI signal from the source (such as a camera) to the SDI/HDMI input port of the
device via a cable.
Note: HDMI and SDI device interface input and loop position is different. It is subject to the actual
device.
4.1.3 Connect network
Connect one end of the network cable to the encoder Ethernet port. The other end is connected to the
network switch or the computer's Ethernet port.
4.1.4 Connect WIFI antenna (for wireless encoder only)
Connect the WIFI antenna with the device antenna interface.
4.2 M2 installation and connection
4.2.1 Connect the power adapter
Connceting the power adapter (DC 12v) to the main product, then the product starts working
immediately.
Note: Please use the standard power adapter provided. Using other unqualified power supplies
may damage the device.

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
15
4.2.2 Connecting video signal
Connect the VGA/HDMI signal from the source (such as a camera) to the SDI/HDMI input port of the
device via a cable.
4.2.3 Connect network
Connect one end of the network cable to the encoder Ethernet port. The other end is connected to the
network switch or the computer's Ethernet port.
4.3 1U series installation and connection
4.3.1 Connect the power adapter
Using the power adapter (AC 220V) connect to the main product, after the power is turned on, then the
product starts working immediately.
Note: Please use the standard power adapter provided. Using other unqualified power supplies
may damage the device.

Version 1.1 © Changsha KILOVIEW Electronics CO.,LTD. All rights reserved
HD Video Encoders · User Manual
16
4.3.2 Connecting video signal
Connect the SDI/HDMI signal from the source (such as a camera) to the SDI/HDMI input port of the
device via a cable.
Note: HDMI and SDI device interface input and loop position is different. It is subject to the actual
device.
4.3.3 Connect network
Connect one end of the network cable to the encoder Ethernet port.The other end is connected to the
network switch or the computer's Ethernet port.