Kimo MP Series User manual

PERFORM A MEASUREMENT
➢Turn on the device by pressing on «On/Off/Esc».
The device displays its name «MP110», «MP111», «MP112» or «MP115», then performs an autozero.
➢Connect the pressure tubes.
The device displays the pressure.
Manometer
MP 110 – MP111 – MP112 – MP 115
OK key
On/Off/Esc key
Hold/min/max keySelect key
Backlight key
PERFORM AN AUTOZERO
The device is on and displays the pressure measurements.
➢Press on «OK».
«Autozero» displays on screen, the device performs an autozero then returns to the measurements display.
DESCRIPTION OF THE DEVICE
[e-mail]
DigiParts GmbH

DISPLAY THE MAXIMUM AND THE MINIMUM
Once the measurement are frozen:
➢Press once on « Hold/min/max ».
The device display the maximum value of pressure measured since the last questioning at the top of the screen and the minimum value of
pressure measured since the last questioning at the ottom of the screen.
➢Press on «On/Off/Esc» to return to the measurement display.
ADJUST THE DEVICE
Select the measuring unit in pressure:
The device is on and displays the measurement.
➢Press on « Select».
«UNIT» links on screen.
➢Press on « OK ».
The unit currently used links on screen.
➢Press on «Select» until the required unit appears: daPa, mmh2 , kPa, inWg, mbar, mmHg...
➢Press on « OK» to validate.
«UNIT» links on screen.
➢Press on «On/Off/Esc» to return to the measurement display.
●De ice drop-down menu
Select1x
SEL.
UNIT
mmh2
2x Select Select 3x
SEL.
BEEP
FF
SEL.
AUT
FF
FF
OK
SEL.
UNIT
kPa
OK
SEL.
UNIT
mmh2
UNIT
SEL.
mmh2
UNIT
SEL.
mmh2/kPa...
0, 108
kPa
1x
On/Off/
Esc
Select Select
FREEZE THE MEASUREMENT
During a measurement:
➢Press on «Hold/min/max».
«Hold» appears on the screen and the measurements are frozen.
➢Press on « On/Off/Esc» to exit the hold function.
The device returns to the measurement display.
[e-mail]
DigiParts GmbH

ACTIVATE THE BACKLI HT
The device is on.
➢Press on «Backlight»: to activate the device backlight.
➢Press again on this key to deactivate the backlight.
➢Remove the front part at the back of the device.
➢Change the old batteries by AAA LR03 1.5V batteries.
➢Replace the front part.
CHAN E THE BATTERIES
Acti ate or deacti ate the keys beep:
The device is on and displays the measurement.
➢Press on «Select » until « BEEP» blinks on screen.
➢Press on «OK».
«OFF» or «ON» links on screen.
➢Press on «Select » to activate the key beep «ON» or deactivate it «OFF».
➢Press on «OK» to validate.
«BEEP» links on screen.
➢Press on « On/Off/Esc» to return to the measurement display.
Select OK
BEEP
SEL.
FF / N
3x
SEL.
BEEP
FF
Select
On/Off/
Esc
OK
SEL.
BEEP
N
0, 108
kPa
BEEP
SEL.
FF
Adjust the auto shut-off:
The device is on and display the measurement.
➢Press on «Select » until «AUTO OFF» blinks on screen.
➢Press on «OK».
The time efore device auto shut-off links at the ottom of the screen.
➢Press on «Select» until the required time before auto shut-off appears: 15, 30, 45, 60, 75, 90, 105, 120 minutes or FF.
➢Press on «OK» to validate.
«AUTO OFF» links on screen.
➢Press on «On/Off/Esc» to return to the measurement display.
2x OK Select
On/Off/
Esc
AUT
FF
FF
Select
SEL.
AUT
FF
FF
AUT
FF
15 / 30mn...
OK
SEL.
AUT
FF
30mn
0, 108
kPa
[e-mail]
DigiParts GmbH