Kimo TR 50 Instruction Manual

Thermometer
TR 50 – TR 52
KEY POINTS
●Easy to use
●HOLD function
●Detachable probe
●Auto shut-off: 20 minutes
FEATURES OF THE HOUSING
Material : ABS
Protection : P54
Display : 1 line
LCD 1 x 5 digits
Size: 50 x 20 mm
Height of digits :
Values:9.2 mm
Units: 4.7 mm
Weight :200 g (with batteries)
TECHNICAL FEATURES
*All the accuracies indicated in this technical datasheet were stated in laboratory conditions, and can be guaranteed for measurements carried out in the same conditions, or carried out with calibration compensation
.
71.5 mm
147.9 mm
34.2 mm
76.7 mm
TR 50
76.7 mm
TR 52
Parameter Temperature
Measuring units °C, °F
Measuring range From -100 to +400 °C
Accuracy* ±0.4% of reading ±0.3°C
Resolution 0.1 °C
Channels num er TR50: 1 channel
TR52: 2 channels
Response time T63 =5 s
Measuring element Pt100 Class A
Operating temperature From 0 to +50 °C
Storage temperature From -20 to +80 °C
Power supply 4 batteries AAA LR03 1.5 V
Battery life 180 hours
Conformity Directives CEM 2004/108/CE and NF EN 61010-1

SUPPLIED WITH
nstruments are supplied with an adjustment certificate and a soft case.
ACCESSORIES
MAINTENANCE
GUARANTEE
●Any Pt100 probe
●Adjustment certificate
●Soft case
●Magnetic protective housing
nstruments have 1-year guarantee for any manufacturing defect (return to our After-Sales Service required for appraisal).
We carry out calibration, adjustment and maintenance of your instruments to guarantee a constant level of quality of your measurements.
As part of Quality Assurance Standards, we recommend you to carry out a yearly checking.
USE OF THE INSTRUMENT
Take a measurement
How to change atteries
●Remove the front part at the back of the instrument.
●Replace used batteries by new batteries AAA LR03 1.5 V.
●Replace the front.
Auto shut-off: the instrument switches off if not used during 20 minutes.
FTang – TR50-TR52 – 06/05/14 – RCS (24) Périgueux 349 282 095 Non-contractual document – We reserve the right to modify the characteristics of our products without prior notice.
●Switch on the instrument by pressing on «On/Off/Hold».
The instrument displays its name «TR50 » or « TR52 », then the measured value.
●Press on «Select» to move from channel 1 to channel 2 (only TR 52).
« Select » key
« On/Off/Hold » key
Once returned to K MO, required waste collection will be assured in the respect of the environment in accordance to 2002/96/CE guidelines relating to WEEE.
During measurement:
●Press briefly on «On/Off/Hold » to hold measurement.
●«Hold» appears on the screen and the measurement is ixed.
●Press again briefly on «On/Off/Hold» to exit the Hold function.
Hold the measurement
The instrument is on and displays the temperature.
●Pressing longer on « Select » to change the unit temperature.
●Press briefly on « Select » to select the unit: °C or °F.
●Pressing longer on « Select » to return to the normal measuring mode.
Change the thermocouple type