kincrome Evolution K7963 User manual

Non-Locking
Castors (3)
Locking
Castors (3)
4 x Hex 5mm
Bolts for
Trolley Handle
13mm x 24 Bolts
(24) for Castors
(with Washers)
Trolley Handle x 1
2 People 13mm Spanner
For Castors:
5mm Hex Key
For Handle:
Tool Trolley
14 x Liners
Keys x 2
K7963
13 Drawer Extra Wide
1350mm (53”)
Operation Manual
Parts List
IMPORTANT: This operating manual contains important safety information,
read carefully & understand all information before operating
the trolley. Save this manual for future use.
Tools & Assistance
Required for Trolley:
Included
1
Measurements: Weight: 96kg
(External - With Castors - 125 x 50mm (5 x 2”) x2 Locking)
WIDTH 1347 mm DEPTH 466 mm HEIGHT 963 mm
Measurements - Top Section
WIDTH 1347 mm DEPTH 466 mm HEIGHT 15 mm
Large Shallow Drawers (Left)
WIDTH 566 mm DEPTH 405 mm HEIGHT 62 mm
Large Deep Drawers (Left)
WIDTH 566 mm DEPTH 405 mm HEIGHT 104 mm
Large Shallow Drawers (Right)
WIDTH 566 mm DEPTH 405 mm HEIGHT 62 mm
Large Deep Drawers (Right)
WIDTH 566 mm DEPTH 405 mm HEIGHT 104 mm
Extra Large Top Drawer
WIDTH 1242 mm DEPTH 405 mm HEIGHT 104 mm
Oversize
This productrequires a two person lift
- use properlifting techniques

2
Tool Trolley
Assembly Instructions
Maintenance
Removing the Drawers
• Fully extend the empty drawer.
• Push up the right grey release lever while
pushing down the left grey release lever.
• Pull the drawer outward until it is
released from the drawer slide.
Re-Inserting The Drawers
• Extend the drawer slides.
• Insert the brackets on each side of the
drawer into the slots on the slides, being
careful that they are properly positioned.
• Once properly inserted, completely close
the drawer to set the slides in their
proper positions.
• Periodically tighten all hardware
• Periodically lubricate castors
• Lubricate the slides twice a year
• Lubricate the lock with graphite annually
• Use a damp Microfibre cloth to clean
all surfaces
Push up the
right grey release lever
Pull down the
left grey release lever
Handle Installing
• Position the trolley side handle behind the
holes on the trolley.
• Attach with (4) bolts, and tighten with
a 5mm Hex Key.
Castor Installing (If applicable)
• Be sure the drawers are locked and lay
the trolley on its side.
• Secure castors to the unit using the
13mm bolts provided.
• Tighten with a 13mm Spanner.
• Repeat this process for the castors on
the opposite of the trolley.
• Return the trolley to its upright position.
Caution: Do not over tighten the bolts.
Caution: Both locking castors must be
fitted to front of trolley.
1
2
1
2
1a 1b
2
1
K7963
13 Drawer Extra Wide
1350mm (53”)

National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [e-mail]
W kincrome.com.au
Administration
T(03) 9730 7100 F(03) 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [email protected]
W kincrome.com.au
Administration
T(03) 9730 7100 F(03) 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
Made to Kincrome Tools & Equipment Pty Ltd Global
specifications and quality standards in China
Australia & Global UK & EU
www.kincrome.com.au www.kincrome.co.uk
[e-mail] [e-mail]
Kincrome UK Ltd PO Box 468 Southampton SO30 9EP
Spare Parts
3
5
7
4
8
6
3
1 & 2
ITEM PART NO. DESCRIPTION QUANTITY
1 K7999-10 Lock & Key 1
2 K7999-11 Key Only (Specify Number) 1
3 K7999-12 Trolley Handle 1
4 K7999-8 Ball Bearing Slide (Pair) 13
ITEM PART NO. DESCRIPTION QUANTITY
5 K7999-29 Eva Mat Pack 14 Pce 1
6 K7999-13 Castor Swivel x 1 3
7 K7999-14 Castor Swivel x 1 (Brake) 3
8
K7999-15 Castor Bolt Pack
1
Tool Trolley
Parts List
K7963
13 Drawer Extra Wide
1350mm (53”)