kincrome TRADECENTRE K7370 User manual

WORKSHOP BENCH K7370
1560mm
OPERATION MANUAL
PARTS LIST
INCLUDED:
IMPORTANT:
This operating manual contains important safety information,
read carefully & understand all information before operating
the bench. Save this manual for future use.
1
2
People
TOOLS & ASSISTANCE
REQUIRED FOR BENCH: For Assembly
Phillips
Screwdriver
MEASUREMENTS: WEIGHT: 62 KG
WIDTH 1560 mm DEPTH 622 mm HEIGHT 1000 mm
MAINTENANCE
• Periodically tighten all hardware
• Use a damp Microfibre cloth to clean all surfaces
• Use stainless steel cleaner, to clean stainless
steel surfaces
BENCH RATING: 300KG
Le & Right
Legs x 2
Stainless
Steel Top x 1
M6 x 16 Bolts
x 22
Cross Beam x 2

2
ASSEMBLY INSTRUCTIONS
WORKSHOP BENCH K7370
1560mm
1. Attach the le and right legs to the underside of the SS work surface.
2. Align the pre-drilled holes in work surface with holes in top of legs.
3. Tighten (3) M6 x 16 Bolts through each leg into work surface.
1. Attach rear crossbeam (no badge holes) to back of le and right legs
2. Align rear crossbeam end holes with holes in back of le and right legs.
3. Tighten (4) M6 x 16 Bolts through rear crossbeam end holes into leg holes
Note: Repeat this process on another rear stringer (with badge holes)
1
2
3
4
rear crossbeam with badge holes
rear crossbeam without badge holes

4
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [e-mail]
W kincrome.com.au
Administration
T(03) 9730 7100 F(03) 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [email protected]
W kincrome.com.au
Administration
T(03) 9730 7100 F(03) 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
3
ITEM PART NO. DESCRIPTION QUANTITY
1 K7370-1 Stainless Steel Top 1
2 K7370-2 Leg Attachment Side 2
3 K7370-4 Lower Cross Support Beam 1
4 K7370-5 Upper Cross Support Beam 1
5 K7370-6 Assembly Nut & Bolt Pack 1
ITEM PART NO. DESCRIPTION QUANTITY
6 K7370-7 Adjustable Feet (4) 1
7 K7366-11 Trade Centre Badge 1
PARTS LIST
SPARE PARTS
Made to Kincrome Tools & Equipment Pty Ltd global
specifications and quality standards in China
Australia & Global
www.kincrome.com.au
[e-mail]
1
5
2
7
6
WORKSHOP BENCH K7370
1560mm
3