kincrome Evolution K7916 User manual

Tool Chest
7 x Liners
K7916
6 Drawer
660mm (26”)
• Periodically tighten all hardware
• Lubricate the slides twice a year
• Lubricate the lock with graphite annually
• Use a damp Microfibre cloth to clean all surfaces
16.1 to 40kg
This product requires a two person lift
- use proper lifting techniques
Bunnings Weight Icons (2676) 30/3/04 10:11 AM Page 2
Operation Manual
Parts List
Maintenance Included
1
Measurements: Weight: 23kg
WIDTH 660 mm DEPTH 305 mm HEIGHT 370 mm
Measurements - Top Section
WIDTH 620 mm DEPTH 295 mm HEIGHT 50 mm
Small Drawers
WIDTH 166 mm DEPTH 255 mm HEIGHT 45 mm
Large Drawers
WIDTH 560 mm DEPTH 255 mm HEIGHT 45 mm
Keys x 2
2 People
Tools & Assistance
Required for Trolley:
IMPORTANT: This operating manual contains important safety information,
read carefully & understand all information before operating
the chest. Save this manual for future use.

1 & 2
3
5
6
4
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [e-mail]
W kincrome.com.au
Administration
T(03) 9730 7100 F(03) 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
National Head Office
National Distribution and Showroom
3 Lakeview Dve, Caribbean Business Park
Scoresby Victoria 3179 Australia
E [email protected]
W kincrome.com.au
Administration
T(03) 9730 7100 F(03) 9730 7199
ABN 41 007 185 006
Customer Service Centre
T1300 657 528 F1300 556 005
Made to Kincrome Tools & Equipment Pty Ltd Global
specifications and quality standards in China
Australia & Global UK & EU
www.kincrome.com.au www.kincrome.co.uk
[e-mail] [e-mail]
Kincrome UK Ltd PO Box 468 Southampton SO30 9EP
K7916
Tool Chest 6 Drawer 660mm (26”)
Parts List
ITEM PART NO. DESCRIPTION QUANTITY
1 K7999-1 Lock & Key 1
2 K7999-2 Key Only (Specify Key Number) 1
3 K7999-3 Gas Struts (Pair) 1
ITEM PART NO. DESCRIPTION QUANTITY
4 K7999-4 Ball Bearing Slide (Pair) 6
5 K7999-5 Side Carry Handle x 1 2
6
K7999-20 Eva Mat Pack 8 Pce
1
Spare Parts
2
Removing the Drawers
• Fully extend the empty drawer.
• Push up the right grey release lever while pushing
down the left grey release lever.
• Pull the drawer outward until it is released from
the drawer slide.
Re-Inserting The Drawers
• Extend the drawer slides.
• Insert the brackets on each side of the drawer into
the slots on the slides, being careful that they are
properly positioned.
• Once properly inserted, completely close the
drawer to set the slides in their proper positions.
Push up the
right grey release lever
Pull down the
left grey release lever
1
2
1a 1b
Maintenance