Kinetec Manosplint Dry Heat Oven User manual

Manosplint® Dry Heat Oven
User manual
Before use, please read this document.
Kinetec SAS reserves the right to effect technical modifications.
The English version is a translation of the original in French. In case of a discrepancy, the
French original will prevail.
EN
IFU-Dry-Heat-Oven-467896391-1
10/2017
Série 1
Notice Originale

EN 1/12
Summary
Preamble .................................................................................................................................................... 2
Important safety instructions .................................................................................................................... 2
Introduction ............................................................................................................................................... 3
Conformity ................................................................................................................................................. 3
Unpacking .................................................................................................................................................. 3
Installing the device ................................................................................................................................... 3
Description................................................................................................................................................. 4
Electrical connection.................................................................................................................................. 5
Manual ....................................................................................................................................................... 5
Cleaning.................................................................................................................................................... 11
Disposal and recycling.............................................................................................................................. 11
Guide de dépannage................................................................................................................................ 11
Technical specifications ........................................................................................................................... 12
Symbols used ........................................................................................................................................... 12

EN 2/12
Preamble
Before using this device, please read this manual carefully and keep it for future reference.
Important safety instructions
•Before connecting the device, check that the mains voltage matches the marking plate (8) (100-120V~
or 220-240V~ 50-60Hz) on the side of the device.
•To avoid a risk of electric shock, the device must only be connected to a power supply network
equipped with a protective earth.
•The device must be installed in a room that meets the installation standards in force in the country.
•Make sure that the power cord cannot be walked on or pinched particularly at plug, connector, and
the point where they exit from the apparatus.
•Unplug the device during lightning storms or when unused for long period of time.
•Only use the original cable supplied with the device.
•In case of replacement of the power cord, use a power cord with the same characteristics assigned and
meets the standards in force in the country.
•The power cord is intended for use only with this device and must not be used with any other
electrical appliance.
•Before any intervention, switch OFF the unit by disconnecting the power cord.
•Dangerous voltages remain in the device even after switching off the switch, the mains cable serves as
a disconnection. Disconnect the unit with the power cord before doing any work.
•The female connector on the power cord is used for disconnection, and must always be easily
accessible.
•To reduce the risk of fire or electric shock,
-Do not expose the unit to rain or moisture;
-Do not place objects filled with liquids (vases, etc.) on or near the device;
-Do not place the device near other sources of heat.
•Before transporting or storing, check that the device is cold.
•Non-stick surfaces become hot during operation. Never touch hot parts. Keep children away.
•For assistance in mounting, operating or maintaining the device, contact your KINETEC® distributor.
•Modifying the device in any way is strictly forbidden.
•If the device is used in a manner not specified in this user manual, the protection provided by the
device may be compromised.
•Before use, check that the device is not damaged particularly the non-stick surfaces. In the event of
chock or trace of impact, contact your KINETEC® distributor.

EN 3/12
Introduction
The Manosplint® dry heat oven is designed to heat thermoplastic materials at low temperature.
Its compact design and waterless rapid heating technology make it the ideal companion for therapists who need a
fast, hygienic and efficient method of heating.
Equipped with non-stick surfaces, the thermoplastic materials can be positioned in direct contact with the heating
surfaces. No additional consumables are required.
Conformity
The Manosplint® dry heat oven meets the requirements of the Machinery Directive 2006/42 CE and is CE marked.
The Manosplint® dry heat oven complies with current standards:
-EN 61326-1; EN62311:2008; EN 61000-6-3:2007/A1:2011 about electromagnetic compatibility.
-ICES-001 issue 4, June 2006; FCC 47 CFR Part 15:2016 about electromagnetic compatibility for US and
Canadian markets.
-EN/CEI 61010-2-010:2015; EN/CEI 61010-1:2010 + US and Canadian deviations about electrical safety.
Unpacking
When unpacking, we draw your attention to the fact that you may need to repack your device. We advise you to
keep stalls, cartons and plastic bags.
Contents:
-Manosplint® dry heat oven
-Power cord
-User manual
Installing the device
The Manosplint® dry heat oven must be installed on a flat surface and wide enough to accommodate the unit.
•To reduce the risk of fire or electric shock,
-Do not expose the unit to rain or moisture;
-Do not place objects filled with liquids (vases, etc.) on or near the device;
-Do not place the device near other sources of heat.
•Make sure that the power cord cannot be walked on or pinched particularly at plug, connector, and
the point where they exit from the apparatus.
•Before use, check that the device is not damaged particularly the non-stick surfaces and protective
housings.