Kinetec Spectra Essential Instruction manual

Kinetec USA
W225N16708 Cedar Park Ct
Jackson, WI 53037
USA
262-677-1248
262-677-1314
[email protected]
www.kinetecusa.com
262-677-1314
262-677-1248
USA
Jackson, WI 53037
W225N16708 Cedar Park Ct
Kinetec USA
262-677-1314
262-677-1248
Jackson, WI 53037
W225N16708 Cedar Park Ct
www.kin
contact
www.kinetecusa.com
[email protected]
Spectra Essential - Quick Start USA - 2014_Mise en page 1 15/05/2014 13:31 Page 1

QUICK START MANUAL • Spectra Essential
Refer to the user manual for more detail.
467896340 - Quick Start - 04/2014
Setting the movement parameters
Press the On/Off switch next to the power supply cable.
Press the button to start movement with the settings used pre-
viously.
Press the button to stop movement.
Press the button to restart movement in the opposite direction.
To change the extension limit: press the button,
then the or buttons within 5 seconds to set the limit.
To change the flexion limit: press the button,
then the or buttons within 5 seconds to set the limit.
Locking/unlocking the handle,
Press the and buttons at the same time.
Installing the patient
• Stop the machine in a position that is comfortable for the patient.
• Loosen both buttons (1) and extend the foot plate (2) as far as it will go.
• Measure the patient's femur length (L).
• Loosen both buttons (3) then transfer the measurement to the gra-
duated scale (4), tighten both buttons (3).
• Install the patient on the machine.
• Bring the board (2) into contact with the patient's foot, then tighten
both buttons (1).
L
23
1
4
EN
Spectra Essential - Quick Start USA - 2014_Mise en page 1 15/05/2014 13:31 Page 2