Knight Anvil Eclipse Workstation User manual

Tools Required:
Assembly Instructions
Powered screwdriver.
Anvil Eclipse
Workstation

knightgroup.co.nz
Page 2
Assembly Instructions
· To prevent possible scratches or damage, assemble
the desk upside down on a soft surface such as a
blanket, carpet or packaging.
· Attach Leg to the top assembly by using bolts, spring
washer, flat washer. Tighten using the allen wrench.
Recommended
2-person Step
Anvil Eclipse Workstation

knightgroup.co.nz
Page 3
Assembly Instructions
Step 1
Step 2
Tighten frames and rails with provided screws.
Losely assembly frames and rails together.
Anvil Eclipse Workstation

knightgroup.co.nz
Page 4
Assembly Instructions
Step 3
Completed
Using two people, carefully set the desk upright and position.
Fix desk frame to worktop, allowing for a 5mm overhang on all sides. Fully tighten worktop and
frame with provided screws.
Anvil Eclipse Workstation
Desk Top
Leg
Frame
Self-tapping
Screw
5mm
Desk Top
Desk
Back Rail
Screw
95mm

knightgroup.co.nz
Page 5
Assembly Instructions
Step 1
Step 2
Position the modesty panels in front of the rails, fully tighten the modesty panels to the worktop
with provided self-tapping screws.
Lay modesty panels on flat surface, fasten brackets to modesty panles with provided screws.
Anvil Eclipse Workstation with Modesty Panel (Optional)

knightgroup.co.nz
Page 6
Assembly Instructions
Step 1
Step 2
Slide the e-Panel screens into brackets and tighten brackets by using allen key.
Clamp the e-Panel screen brackets onto worktop, tighten with provided self-tapping screws.
Anvil Eclipse Workstation with e-Panel Screen Optional

knightgroup.co.nz
Assembly Instructions
Step 1
Hold the basket cable trays perpendicular to the worktop, tighten cable trays to worktop using the
provided self-tapping screws.
Completed
Anvil Eclipse Workstation with Basket Cable Trays (Optional)