Knight Ergoplan User manual

knightgroup.co.nz
Tools Required: Powered Screwdriver
Assembly Instructions
Ergoplan Desk

Page 1
Assembly Instructions
knightgroup.co.nz
Ergoplan Desk
• To prevent possible scratches or damage, assemble
the desk upside down on a soft surface such as a
blanket, carpet or packaging.
Recommended
2-person Step

Page 2
Assembly Instructions
knightgroup.co.nz
Ergoplan Desk
Item Description Qty Item Description Qty
A Desk Top 1 6*35 Cam Bolt 10
X Desk Left Side Panel 1 8*30 Dowel Pin 10
Z Desk Right Side Panel 1 5/8” Cam Cover 10
D Back Panel 1 Bracket 4
3.5*15 Screw 16
10 x 6*35 Cam Bolts
16 x 3.5*15 Screws
Cam Cable Port
10 x 8*30 Dowel Pin 10 x 5/8” Cam Cover 4 x Bracket
c1
s1
d1
C5 o5
d1
b1
s1
C2
c1
b1
c2
Pre-installed Parts

Page 3
Assembly Instructions
knightgroup.co.nz
Ergoplan Desk
Step 1
lnsert cam bolts (c1) into panels A, X and Zand insert dowel pins (d1) into panels X, Z and Das illustrated below.

Page 4
Assembly Instructions
knightgroup.co.nz
Page 4
Assembly Instructions
Ergoplan Desk
Step 2
Insert cam bolts (c1) on panels Xand Zinto cam on panel Dand tighten in a clockwise direction as illustrated
below. Connect panel Dand panel X/Z by bracket (b1).

Page 5
Assembly Instructions
knightgroup.co.nz
Page 5
Assembly Instructions
Step 3
Insert cam bolts (c1) on panel Ainto cams on panels D, X and Zand tighten in a clockwise drection as illustrated
above. Cover the cam covers (c2) on the top of all the cams.
Ergoplan Desk

Page 6
Assembly Instructions
knightgroup.co.nz
Ergoplan Desk
Complete