Knight Eko Cupboard 900H User manual

knightgroup.co.nz
Tools Required: Powered Screwdriver
Assembly Instructions
Ergoplan Cupboard 900H

Assembly Instructions
knightgroup.co.nz
Ergoplan Cupboard 900H
Recommended
2 Person Assembly
Thank you for purchasing Knight product, please carefully read the assembly instructions prior to installment to gain a complete
understanding of the product. It provides you with important information about the safety, use, installation and maintenance.
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS REGARDING
THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.
SAFETY
• The product must be used in a safe manner. Inappropriate use may cause damage to the product and/or cause bodily harm to
the user or persons nearby.
• Don’t locate furniture in direct sunlight or near air-conditioning inlet or heating radiator.
• Don’t put high-temperature or frozen objects on furniture.
• Safely carry product to location of assembly.
• Retain this operation manual and pass it on to any future owner.
SET UP AND INSTALLATION
• Assemble the product according to the assembly instructions.
• To prevent possible scratches or damage, assemble the product on a soft surface such as a blanket, carpet or packaging.
• Place the product a safe distance from window frames, radiators, furniture etc. so that persons cannot become trapped.
It is recommended that this product is assembled by 2 people.
Any questions contact Knight on 0800 143 143
Due to continuous improvement of our products, our assembly instructions may not be in complete accordance with the product
and we apologise in advance.

Assembly Instructions
knightgroup.co.nz
Ergoplan Cupboard 900H
Parts
Item Description Quantity
ATop Panel 1
XLeft Side Panel 1
ZRight Side Panel 1
DBack Panel 1
GBottom Panel 1
EMovable Shelf 1
V1 Door Panel 1
V2 Door Panel 1
A
X
Z
D
E
G
V1
V2
The turning direction
of attaching
Incorrect Correct

Assembly Instructions
knightgroup.co.nz
Ergoplan Cupboard 900H
Item Description Quantity
c1 6x35 Cam Bolt 18
d1 8x30 Dowel Pin 16
c2 Cam Sticker 18
h3 Handle 2
p1 Shelf Pin 4
s1 4x16 Screw 22
s7 4x22 Fix Bolt 4
g2 Hinge Body 4
k4 Lock 1
k1 Lock Catch 1
k5 Lock Catch 1
c6 Foot 4
s2 3.5x35 Screw 4
Parts
c1 6x35 Cam Bolt
g2 Hinge Body
s2 3.5x35 Screw
d1 8x30 Dowel Pin c2 Cam Sticker h3 Handle s1 4x16 Screw
k4 Lock
p1 Shelf Pin
K5 Lock Catchs7 4x22 Fix Bolt c6 Foot
Cam
(pre-installed)
k1 Lock Catch

Page 1
Assembly Instructions
knightgroup.co.nz
Step 1
Page 1
Assembly Instructions
Preparation for top panel A, bottom panel G, left side panel X, right side panel Z, door panel V1 and V2.
1. Insert cams bolts (c1) and dowel pins (d1) into panels A, G, X and Z.
2. Fix the lock catch (k1) to panel A with screws (s1).
3. Fix hinge bodies (g2) to panels V1 and V2 with screws (s1).
4. Assemble handles (h3) to panels V1 and V2 with fix bolts (s7).
5. Fix the lock catch (k5) to panel V1 with screws (s1).
6. Fix the lock (k4) to panel V2 with screws (s1).
7. Assemble feet (c6) to panel G with screws (s2).
Ergoplan Cupboard 900H
V1
V2
s1
s1
s7
g2
h3
k4
s1
k5
A
k1
s1
G
s2
c6
Z
c1
d1
X
c1

Page 2
Assembly Instructions
knightgroup.co.nz
Page 2
Assembly Instructions
Step 2
Top panel A, bottom panel G, back panel D, side panel X and Z assembly.
1. Insert cam bolts (c1) on panel Z and X into cams on panel D and tighten in a clockwise direction.
2. Insert cam bolts (c1) on panel A and G into cams on panel X, D & Z and tighten in a clockwise direction.
3. Cover top of cams with cam stickers (c2).
Ergoplan Cupboard 900H
A
X
Z
D
G
c1
c2
c1
c1
c2

Page 3
Assembly Instructions
knightgroup.co.nz
Page 3
Assembly Instructions
Step 3
Movable shelf E assembly.
1. lnsert shelf pins (p1) into panels X and Z at desired shelf height.
2. Place movable shelf E on top of the shelf pins (p1).
Ergoplan Cupboard 900H
p1
A
X
Z
D
G
E

Page 4
Assembly Instructions
knightgroup.co.nz
Page 4
Assembly Instructions
Step 4
Door panel V1 and door panel V2 assembly.
1. Fix hinge bodies (g2) on door V1 to the inner of panel X with screws (s1).
2. Fix hinge bodies (g2) on door V2 to the inner of panel Z with screws (s1).
3. Follow diagram below to adjust the vertical, depth and sideways movement of the doors.
Ergoplan Cupboard 900H
Z
E
X
V1
V2
A
G
AA
C
1. Loosen screw A
2. Adjust door sideways
with screw C
3. Tighten screw Aagain
1. Loosen screw A
2. Adjust door in depth
3. Tighten screw Aagain
1. Loosen B screws
2. Adjust door vertical
3. Tighten B screws again

Page 5
Assembly Instructions
knightgroup.co.nz
Page 5
Assembly Instructions
Ergoplan Cupboard 900H
Complete