Knight Anvil Desk User manual

knightgroup.co.nz
Tools Required: Powered Screwdriver
Assembly Instructions
Anvil Desk

Page 1
Assembly Instructions
knightgroup.co.nz
Anvil Desk
• To prevent possible scratches or damage, assemble
the desk upside down on a soft surface such as a
blanket, carpet or packaging.
• Attach legs to the top assembly by using bolts, spring
washer, flat washer. Tighten using the allen wrench.
Recommended
2-person Step

Page 2
Assembly Instructions
knightgroup.co.nz
Step 1 Step 2
Page 2
Assembly Instructions
Loosely assemble frames & rails together
(1 turn from tight).
Fix desk frame to worktop, allowing for a 5mm over-
hang on all sides. Fully tighten all rail to frame screws.
Completed
Anvil Desk
Desk Top
Leg
Frame
Self-tapping
Screw
5mm
Desk Top
Desk
Back
Rail
Screw
5mm

Page 3
Assembly Instructions
knightgroup.co.nz
Page 3
Assembly Instructions
Fully tighten the modesty to the rail with provided
screws.
Position the modesty behind the rail.
Step 4Step 3
Completed
Anvil Desk with Modesty Panel (Optional)