Knoll Antenna Digital Control Switch User manual

Quick Set Up Guide
Antenna Digital Control Switch—
For Use with Tone and Antenna Telescope
Knoll Ofce Tables
The Antenna Digital Control Switch is designed for use with Tone Height-Adjustable Tables and Antenna Telescope. The switch features
basic up and down buttons; programmable quick sit and quick stand buttons; and three additional programmable height settings.
This document will guide users through basic set up and programming the most commonly-used functions of this Switch. For more detailed
instructions, or for the full Antenna Digital Control Switch User Guide, visit the Tone or Telescope product pages at www.knoll.com.
Program a Quick Sit Height
1. Move the table to seated height.
2. Press and hold for 3 seconds.
3. Immediately press . Quick sit is programmed.
Program Quick Stand Height
1. Move the table to standing height.
2. Press and hold for 3 seconds.
3. Immediately press . Quick stand is programmed.
Operating the Table
Tone and Antenna Telescope feature press-and-hold adjustments
to prevent injury to users and damage to surrounding objects.
To adjust the table up or down or to move to any of the preset
heights, a user must press and hold the appropriate button.