KoamTac SKX SmartSled SKXSLED-mPOS User manual

SKX™SmartSled®
Charging Cradle Mini Guide
Charging via USB Type-C
Charging via DC Connector 5-Slot Charging via DC Connector
The 12V/2A DC power adaptor supports 9V fast charging
when the SKX is mounted on the charging cradle. (B)
The 12V/10A DC power adaptor supports 9V fast charging
when the SKX is mounted on the 5-slot charging cradle. (C)
Use a genuine Samsung AFC adaptor for 9V fast
charging. Use a minimum 5V/2A rated USB adaptor
for 5V normal charging. (A)
*Fast charging is only supported when using a genuine
Samsung AFC charger.
Charging the SKX with Protective Boot
Insert the SKX with Protective Boot into the slot as
shown below. (D)
XCover 1-Slot Charging Cradle
XCover 5-Slot Charging Cradle
SKX Pistol Grip 1-Slot Charging Cradle
SKX Pistol Grip 5-Slot Charging Cradle
* All pictures shown are for illustration purpose only.
Actual product may vary.
SKXSLED-mPOS
SKXSLED-MSRIC

Removing the Battery Cover
To remove, pull the hook on the battery cover toward
you and tilt it upwards. (G)
Insert the battery into the extended battery slot on the
cradle with the battery’s charging LED indicator facing
toward the back of the cradle. (H)
20210629
933455
Charging the SKX Extended Battery
Charging the SKX
1. Assemble the SKX spacer (optional) as shown in the
figure below. (E)
2. The SKX will now fit into the charging cradle without
the protective boot. (F)
Cradle Power LED Status Battery LED Status
Battery
Status LED
Orange: Charging
Blinking Red: Charging Issue
- Overheating
- Charging fault
- Foreign material inside
Green: Fully charged
Main Power
Status LED
SKX Spacer
Green : Always on when the cradle is powered on