KoamTac SKXPro User manual

SKX Charging Cradle
Mini Guide
Charging via USB Type-C
Charging via DC Connector 5-Slot Charging via DC Connector
The 12V/2A DC power adaptor supports 9V fast charging
when the SKX is mounted on the charging cradle. (B)
The 12V/10A DC power adaptor supports 9V fast charging
when the SKX is mounted on the 5-slot charging cradle. (C)
Use a genuine Samsung AFC adaptor for 9V fast
charging. Use a minimum 5V/2A rated USB adaptor
for 5V normal charging. (A)
*Fast charging is only supported when using a genuine
Samsung AFC charger.
Charging the SKX with Protective Boot
Insert SKX with Protective Boot in to slot as shown
below. (D)
XCover 1-Slot Charging Cradle
XCover 5-Slot Charging Cradle
SKX Pistol Grip 1-Slot Charging Cradle
SKX Pistol Grip 5-Slot Charging Cradle
*The manual explanation proceeds with the image of
SKXPro Charging Cradle.

Removing the Battery Cover
To remove, pull the hook on the battery cover forward
and tilt it upwards. (G)
Insert the battery into the extended battery slot on the
cradle with the battery’s charging LED indicator facing
towards the back of the cradle. (H)
20210624
933455
Charging the SKX Extended Battery
Charging the SKX
1. Assemble the SKX spacer (Optional) as shown in the figure
below. (E)
2. The SKX will now fit into the charging cradle with out
protective boot. (F)
Cradle Power LED Status Battery LED Status
Battery
Status LED
Orange: Charging
Blinking Red: Charging Issue
- Overheating
- Charging fault
- Foreign material inside
Green: Fully charged
Main Power
Status LED
SKX Spacer
Green : Always on when the cradle is powered on