KoamTac XCover Pro OtterBox User manual

XCover Pro OtterBox
Charging Cradle Mini Guide
Charging via USB Type-C
Charging via DC Connector 5-Slot Charging via DC Connector
The 12V/2A DC power adaptor supports 9V fast charging
when XCover Pro is mounted on the charging cradle.
(B)
The 12V/10A DC power adaptor supports 9V fast charging
when XCover Pro is mounted on the 5-slot charging
cradle. (C)
Use a genuine Samsung AFC adaptor for 9V fast charging.
If not using a Samsung AFC adaptor, use a USB adaptor
with at least a 5V/2A rating to provide 5V normal
charging. (A)
*Fast charging is only supported when using a genuine
Samsung AFC charger.
Assembly Instructions
1. Slide XCover Pro into the uniVERSE Case. (D)
SKXPro 1-Slot Charging Cradle
SKXPro 5-Slot Charging Cradle

Cradle Power LED Status Battery LED Status
Removing the Battery Cover
To remove, pull the hook on the battery cover forward
and tilt it upwards. (F)
Insert the battery into the battery slot by referring
to the battery polarity indicators. (G)
Main Power
Status LED
Battery
Status LED
Orange: Charging
Blinking Red: Charging Issue
- Overheating
- Charging fault
- Foreign material inside
Green: Fully charged
Green : Always on when the cradle is powered on KOAMTAC XCover Pro uniVERSE Case Charging Cradle
Built for OtterBox uniVERSE
Explore at Business.OtterProducts.com
Charging the XCover Pro Battery
2. The XCover Pro will now fit into the charging cradle
while using a uniVERSE Case. (E)
20210308