Kogan SMARTERHOME SMART POWER BOARD User manual

KOGAN SMARTERHOME™
SMART POWER BOARD
(4 USB PORTS 30W PD CHARGING)
KASPS30WACA

• Indoor use only.
• Always use the socket in a dry place. Do not use in a bathrooms or other locations
where it will be exposed to water or high humidity.
• Ensure the smart socket is not overloaded, working power cannot be higher than the
rated current. Refer to the power rating in the “Specification” section.
1
Circuit breaker
2
AC outlet (x4)
3
Manual control button
4
USB-A 30W fast charging
5
USB-C 30W fast charging
6
Indicator for USB
7
USB-A & USB-C (5V 2.4A each)
8
Power cord
OVERVIEW
4
1
6
7
5
3
2
8
SAFETY & WARNINGS

Install App
Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS).
Play Store (Android)
App Store (iOS)
To register:
1. If you already have a SmarterHome account, select ‘Log In’. To register a new
account, select ‘Sign Up’.
2. The system will automatically recognise your country. If needed, you can manually
select your country from the drop-down box. Enter your email address and tap
‘Get Verification Code’ to continue.
3. A 6-digit code will be sent to the submitted email address. Enter this code before
the one-minute timer expires.
4. Continue to the next page and complete your SmarterHome profile.
CONNECT TO SMARTERHOME™ APP
\

Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (indicator light
rapidly flashing). If not automatically in pairing mode when powered on, you can manually
set the device in pairing mode by first unplugging the device from the power supply.
Reconnect the power board back to electrical outlet and hold the button for 5-10 seconds
until the indicator light is flashing rapidly.
Add device through network
1. Once registered, tap “Add Device” on the app’s home page, or the “+” in the upper
right corner, to add a new device through the network.
2. Select the product type from the list of options in the app (Electrical > Power
Strips).
3. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the
app are connected to the same Wi-Fi network during setup.
Notes:
• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.
• Depending on the product, Steps 3 and 4 may be in opposite order.