C. Instructions
1. Turn on or off and Saving Video File:
1 - Unscrew the Pen Ca era, insert the TF Card into the TF Card Slot.
2 - Press and hold the button on top of the Pen Ca era for 2 seconds, then a yellow indicator light
will display. It is now powered on and in Standby. Once the indicator is light on, press and hold the
button for 4 seconds and the yellow light will flash. The Pen Ca era will save the video file
auto atically and shutdown.
2. Video Recording and Taking Photo:
After turning on the ca era, the indicator light will be yellow. Press the button once quickly and the
ca era will take one picture. At this point the light will be back to yellow again. Press the button
for 2 seconds and the yellow light will flash 3 ti es and go off and will then begin to take video.
Press again to stop the video and save the file. In order to ensure the docu ent’s size and quality, the
syste will save the video files auto atically every 15 inutes and continue video recording.
. Connect to Computer:At the state of being turned off or in standby, the pen can be connected
to co puter. The pen will appear on the co puter as a Re ovable Disk, which can be opened to
display the photo and video files saved there. When the ca era is transferring data with the
co puter, the red light will blink. When disconnecting the ca era, please click the “Safely
Re ove Hardware" icon which is on the lower right corner of the co puter screen. After the
syste has co pleted this operation, you can disconnect the ca era fro the co puter.
4. Charge: connect the USB port of the co puter and the ca era will be charged. When the
battery is charging the yellow light will be on and the red light blink slowly. Once the battery is
full, the red light will be off.
5. Set the time: Create a “txt” file under root directory of the e ory Card na ed “Ti e.txt”.
Open the "ti e" text docu ent, and input the ti e settings string, the string is co posed of
"Year-Month-Day", then a single space, followed by, " hours: inutes:seconds".
For exa ple:
2012-08-16 13:26:20
After that the text will be deleted by syste auto atically and the ti e will auto atically run when
you restart the achine for another recording.
To use it as a Plug-and-Play Webcam: insert Micro SD Card into the card slot, power on the pen
ca era, connect it to PC by USB Cable and it will show up as a USB Pen Drive. Hold the button till
it shows as a Plug-and-Play Webca by using skype or "a cap" to open it.