Kogan KAPB10K225A User manual

10000MAH 22.5W PD
POWER BANK
KAPB10K225A

Caution
•Fully charge and discharge the power bank three times before first use, leaving it
for an additional 2 hours these first three times to maximise the performance of the
battery.
•Do not attempt to repair this product yourself. If the product or its power supply
experiences any malfunction or damage, stop using it immediately and contact
Kogan.com to arrange a repair.
•Avoid using this product in the following environments: high temperature, low
pressure, low temperature, humidity, dust, strong magnetic fields and long-term
exposure to sunlight. It is recommended that you at an altitude of 3000 meters, 0 °
to 35°C and humidity of 5-95% of the environment using the product.
•This product must not be exposed to dripping and splashing water, also it should
not be placed in the annexe next to items such as cups filled with liquid a class.
•Dispose of this product and accessories following all relevant local environmental
regulations.
Tips
•If the power bank will not be used for a long time or the battery life becomes
shorter, it is recommended to fully discharge and then recharge the battery. If it will
not be used for a long time, place it in a dry environment between 5–35 °C.
Environmental Claims
Name
Name and Content of Hazardous Substances
Pb
Hg
Cd
Cr (VI)
PBB
PBDE
Power bank
X
0
0
0
0
0
Accessories
0
0
0
0
0
0
O: Means the PH substances in the material is under the GB/T 26572 standard
X: Means the PH substances is out of the GB/T 26572 standard.
SAFETY & WARNINGS

OVERVIEW
Micro USB
Input Port
USB Output Port 2
Type-C input/
output port
USB Output
Port 1
Indicator light
Power On/OFF

Power Indicators
The 4 LEDs on the device show capacity show the capacity. The power bank will display the
current charge level when it is turned on.
LED illuminated
LED flashing
LED off
While charging
Indicators
Capacity
Note
0%--25%
The power bank is
fully charged when
all the light is lighting
25%--50%
50%--75%
75%--100%
100%
While discharging
Indicators
Capacity
Note
0%–25%
When the power is
close to 5%, the last
light will flash
continually as a low
power indicator
25%–50%
50%–75%
75%–100%
100%
INSTRUCTION