Kogan SMARTERHOME KAS5ARMDFDA User manual

KOGAN SMARTERHOME™
SMART AROMA DIFFUSER
500ML
KAS5ARMDFDA, KASHSMARDFA

•Do not attempt to disassemble or repair the product. If the product needs to be
repaired, contact Kogan.com.
•Do not damage the power cable in any way. Stop using the device if there is any
damage to the power cord.
•Do not carry the device by the power cord.
•Do not use the device and power adapter in a wet area such as a bathroom or
kitchen.
•Make sure the device is kept clean. After using the product, drain the water out of
the water tank and use a cloth to wipe it clean.
•The essential oils utilised may cause staining if spilled. Clean immediately if spilled.
•Do not fill the unit directly from the tap. Use the measuring cup to add water into
the water tank.
•Don’t let the nozzle spray directly on furniture, clothes or walls.
•Avoid placing the device in direct sunlight, or close to an air conditioner, fan or high
temperature appliances.
•Position the unit on a flat, level surface.
•Avoid placing the device near other electronics.
•Ensure the mist outlet is unobstructed.
•Only use clean tap water.
•Do not move the device while it is operating.
•Don’t touch the product with wet hands in order to avoid the risk of shock.
•Place the product out of the reach of children and pets.
SAFETY & WARNINGS

A
Mist outlet
G
Light button
B
Upper cover
H
High / Low / Wi-Fi button
C
Water tank cover
I
Mist button
D
Air outlet
J
Air intake
E
Water tank
K
DC socket
F
Base
L
Water outlet
OVERVIEW

Install App
Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS).
Register
If you do not have a Kogan SmarterHome™ account, register or sign in with a verification
code sent by SMS.
To register:
1. Ta p to enter registration page.
2. The system automatically recognises your country/area. You can also select your
country code manually. Enter your email address and tap ‘Next.’
3. Alternatively, you can select ‘Register by mobile number’ and enter the verification
code sent to you by SMS.
4. Create a profile on the next page to define your location and room.
CONNECT TO SMARTERHOME™ APP

Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the white will be
flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by long pressing the middle button (High/Low/Wi-Fi) for 5-8 seconds or until
the white light begins rapidly flashing.
Add device through network
5. Once registered, tap “+” in the upper right corner of the app’s home page to add a
new device through the network.
6. Select the product type from the list of options in the app (Air Treatment > Aroma
Diffusers).
7. Ensure that the device is in pairing mode, with the white light flashing rapidly, and
tap “Confirm light is rapidly flashing”.

8. Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important
that your SmarterHome™ device and the app are connected to the same Wi-Fi
network during setup.
9. The device will commence the pairing process and connect to the app. Ensure your
Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until
connection is complete.
10. After successfully being added, you will have the option to rename the device and
assign it to a location. It will now be listed on the app’s home page. Tap the device
listing to enter its control page.
Notes:
•The device and the app have to use the same Wi-Fi network.
•The device is only compatible with 2.4Ghz networks.

Functions available within the app
Click to turn on the Spray
Click to switch to Large spray
mode (HIGH)
Click to switch to Small spray
mode (LOW)
Set a timer
Tu r n on the light
Choose cycle mode

Choose selection mode

Adding “SmarterHome” to the Google Home app
1. From the home page of the Google Home app, select the “+” icon to access the
‘Add and manage’ page.
2. Select ‘Set up device’, then under the Works with Google banner, select ‘Have
something already set up?’
3. Select the search bar and type ‘Smarter Home’ to locate the Kogan
SmarterHome™ service.
GOOGLE HOME CONTROL
Note:
You will need to have set up a Google Home account prior to linking your
Kogan SmarterHome™ device.

4. Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and
your devices.
5. From here, you will be prompted to sign into your SmarterHome™ account using
either your email or mobile phone number, depending on which method you used
to register your account.

6. Once connected, the app will display any compatible devices linked to your
SmarterHome™ account. From here you can assign them to rooms and set up any
routines.
7. Tap on any of the devices to view a list of available commands.
Note:
Please note that Google Home can only control the base/core functions of any
compatible SmarterHome™ devices. To make full use of this product’s smart
functionality, please use the Kogan SmarterHome™ app.

Adding “SmarterHome” to the Alexa app
1. From the home page of the Alexa app, select the “ ” icon in the top-right and
select Skills & Games from the sidebar.
2. Select the search bar and type ‘Smarter Home’ to locate the Kogan
SmarterHome™ skill.
AMAZON ALEXA CONTROL
Note:
You will need to have set up an Alexa account prior to linking your Kogan
SmarterHome™ device.

3. Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa.
4. From here, you will be prompted to sign into your SmarterHome™ account using
either your email or mobile phone number, depending on which method you used
to register your account.
5. Tap ‘Authorise’ to grant Alexa permission to access the SmarterHome™ app and
your devices.

6. Once connected, the app will perform a search and display the devices linked to
your SmarterHome™ account.
7. When your devices have successfully connected to the Alexa app, you will be able
to control your Kogan SmarterHome™ devices via Alexa’s voice commands.
Note:
Please note that Alexa can only control the base/core functions of any compatible
SmarterHome™ devices. To make full use of this product’s smart functionality,
please use the Kogan SmarterHome™ app.

1. Remove the upper cover (figure 1).
2. Connect the AC adapter to the DC socket on the base (figure 2).
3. Using the measuring cup, fill the water tank with tap water up to the maximum
water level line.
-Do not overfill, mist output may be low.
-Do not use hot water.
-Never fill with water during operation.
-Drop the essential oils directly into the water tank; around 0.1ml-0.15ml per
100ml of water (figure 3).
4. Replace the upper cover onto the base (figure 4).
-The upper cover must be in place during operation.
OPERATION

5. Connect the AC adapter to a power outlet.
6. Operate the mist button on the right-hand side of the unit:
a. 1st press: sets timer for one hour of continuous mist.
b. 2nd press: sets timer for two hours of continuous mist.
c. 3rd press: sets timer for three hours of continuous mist.
d. 4th press: continuous mist; will turn off when water level becomes too low.
e. 5th press: turns off the mist (figure 5).
7. Operate the light button on the left-hand side of the unit:
a. 1st press: soft colour cycling.
b. 2nd press: freeze on the current colour.
c. 3rd press: turns the light off (figure 6).
8. The middle button will alternate between HIGH and LOW mist modes.
-The diffuser outputs at high mist mode by default. Press to switch to low
mist mode.
9. The middle button also controls the Wi-Fi functionality:
-The white light will start flashing fast after pressing the middle button for
5-8 seconds while the power is off, but the device is plugged in.
-The white light will stop flashing when successfully connected to Wi-Fi.
10. The unit turns off automatically when the water level reaches its lower limit.
Notes:
•The diffuser will not work without water.
•The amount and intensity of mist produced will vary, but this is not unusual and
should not be considered as a fault. Factors that affect this include water type,
humidity, temperature and air currents.
•It is recommended that the device is cleaned every time the oil is changed.
•Oils are corrosive and will build up over time on the atomising plate.
Accidental leakage
In the event of the unit being knocked over or tipped during usage, please follow the below
instructions:
1. Unplug the unit and remove the cover.
2. Pour any remaining water out of the water tank.
3. Shake the unit gently to drain any water inside the mechanism and allow it to dry
for at least 24 hours.

After using 5-6 times or for 3-5 days, please clean the product as below:
1. Unplug the unit from power supply and remove the cover.
2. Pour any remaining water out from the drain side of the water tank.
3. Add some warm water into the tank, mix with a neutral detergent and wash with a
clean cloth.
4. If you find any dirt in the air outlet, please remove the container cover and clean it.
5. Never use other acids, enzymes or detergents, as this may present the risk of
poisonous emissions or malfunctioning of the unit.
CLEANING & CARE

Issue
Solution
Device powers off one second
after turning on.
Confirm the tank contains water up to the level
line.
Confirm the power adapter is connected to the
wall outlet correctly.
Power cycle the device by unplugging the power
adapter, leaving it for 10 seconds and then
plugging it back in.
Weak or no mist.
Confirm the tank contains water up to the level
line.
Make sure the water is not above the maximum
level.
If the device is dirty, dust can block the outlets
and air intake. Clean the device.
Unit is leaking water.
Ensure the top cover is attached correctly.
The surrounding temperature and humidity can
cause condensation on the device.
WiFi is not connecting
Ensure the diffuser is in close proximity to your
WiFi router.
Check that you pressed the middle button
(High/Low/Wi-Fi) to activate pairing mode, as
outlined in the “connect to SmarterHome™ app
section.
TROUBLESHOOTING

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com