Kogan SMARTERHOME KASGSHT24BA User manual

KOGAN SMARTERHOME™
2400W GLASS PANEL HEATER
KASGSHT24BA, KASGSHT24WA

2
Safety & Warnings
3
Components
5
Overview
6
Installation
7
Connect to SmarterHome™ App
9
Operation
14
Google Home Control
16
Amazon Alexa Control
19
Notes
22

3
• Read all instructions fully before using the product for the first time and retain for
reference. If passing this product on to a new owner, include a copy of this guide.
• Power Input：220-240V~50-60Hz
• Power Consumption: 1200-2400W
• Do not leave this unit unattended while it is in use.
• Some parts of this product can become very hot and cause burns. Particular
attention must be given when children and vulnerable people are present. Keep
children and pets at a safe distance from the unit.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children shall not play with the appliance. Cleaning and user maintenance shall not
be made by children without supervision.
• This heater is not equipped with a device to control the room temperature. Do not use
this heater in small rooms when occupied by persons not capable of leaving a room
on their own, unless constant supervision is provided.
• In order to avoid overheating and potential fire hazard, ensure the heater is not
covered. In particular, do not use it for drying clothes.
• Do not attempt to repair this product yourself. If the product or its power supply
experiences any malfunction or damage, stop using it immediately and contact
Kogan.com to arrange a repair.
• If the power cable shows any signs of damage, cease use immediately and contact
help.Kogan.com for support.
• Do not handle the element with bare hands. If it is inadvertently touched, remove
finger marks with a soft cloth and methylated spirits or alcohol: otherwise, the marks
will burn into the element causing premature heater failure.
• This product is suitable for indoor use only.
• Do not use this heater in the immediate surroundings of a bath, shower or swimming
pool.
• Do not touch the plug with wet or damp hands.
• Do not run the power cable under carpeting. Do not cover the power cable with rugs,
runners, or similar coverings. Arrange the power cable away from foot traffic and
where it will not be tripped over.
• Do not wind the power cable around the unit.
SAFETY & WARNINGS

4
• Do not insert or allow foreign objects to enter any ventilation or opening on the heater,
as this may result in electric shock, fire or damage to the heater.
• Where possible, avoid the use of an extension cable as this may overheat and cause
a fire. However, if you have to use an extension cable, ensure it is suitable for the
purpose, has been tested for outdoor use and preferably has an RCD device fitted or
attached.
• Always ensure that the heater is plugged into a suitable socket.
• Do not position directly above or below an electrical socket.
• Always use on a dry, suitably strong, stable, flat and level surface.
• Always unplug the unit and ensure that the unit has cooled completely before
moving, cleaning or storing.
• This heater is intended for domestic use only and should not be used commercially for
contract purposes. Any alternative use, not recommended by Kogan.com, may result
in fire, electric shock or injury to persons.
• Check exterior walls for areas of damage before installing the heater.
• Check exterior walls for communication and electrical cables and pipelines. Should
any service lines be present in the immediate vicinity do not install your heater, find an
alternative location to install this product.
• Do not remove any of the warning stickers or signs from the product.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• When the appliance is not in use and before cleaning, unplug the appliance from the
outlet firstly.
• WARNING: In order to avoid overheating, do not cover the heater.
• The heater must not be located immediately below a socket outlet.
• Do not use this heater if it has been dropped.
• Do not use if there are visible signs of damage to the heater.
• Use this heater on a horizontal and stable surface, or attach it to the wall.
• WARNING: Do not use this heater in small rooms when they are occupied by persons
not capable of leaving the room on their own, unless constant supervision is provided.
• WARNING: To r e d u c e t h e r i s k o f f i r e , ke e p t ex t i l e s , c u r t a i n s , o r a n y o t h e r f l a m m a b l e
material a minimum distance of 1 metre from the air outlet.
• The heater is to be installed so that switches and other controls cannot be touched
by a person in the bath or shower.

5
AGlass panel heater (x1)
B35mm self-tapping screws (x2)
CM4 8mm screws (x8)
DWall anchors (x2)
EUser guide (x1)
COMPONENTS

6
1
Setting button
8
Timer indicator
2
Up button
9
Temperature (°C)
3
Down button
10
LED number display
4
Power button
11
ECO mode
5
Heating element working indicator
12
Low/High heating mode
6
Low indicator (50% power)
13
Wi-Fi Indicator (solid when
connected; otherwise, flashing)
7
High indicator (100% power)
OVERVIEW
Air Outlet
Control Display
Switch
Leg

7
Leg Installation
Remove the heater and all accessories from the packaging.
1. Place the heater on a flat, dry, and clean surface. Secure the legs in place using
the M4 8mm screws, as shown below.
2. Turn the heater right-side up and ensure it sits firmly on its legs.
Notes:
• Make sure there is no breakage or crack on the power cord before its first use.
• Ensure the rating power of the heater is the same with your local power, and
that the socket has safety grounding equipment. If the socket is not equipped
with safety grounding equipment, replace the socket.
INSTALLATION

8
Wall Mount Installation
1. Drill two holes 538mm apart,
ensuring they are straight using
a spirit level, then insert the wall
anchors.
2. Ensuring the holes are aligned,
attach the heater to the wall
with 35mm self-tapping screws.
Removing the Heater
To remove the heater from the wall, pull the
heater 5mm outward and then move it 10mm
to the left.
Note:
The heater MUST be installed with a minimum distance of 100mm from all four sides
of the heater.
Air Outlet
100mm
Floor
100mm
100mm
100mm

9
Install App
Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS).
Play Store (Android)
App Store (iOS)
To register:
1. If you already have a SmarterHome account, select ‘Log In’. To register a new
account, select ‘Sign Up’.
2. The system will automatically recognise your country. If needed, you can manually
select your country from the drop-down box. Enter your email address and tap
‘Get Verification Code’ to continue.
3. A 6-digit code will be sent to the submitted email address. Enter this code before
the one-minute timer expires.
4. Continue to the next page and complete your SmarterHome profile.
CONNECT TO SMARTERHOME™ APP

10
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (Wi-Fi indicator
will be flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by press and holding the setting button for five seconds until Wi-Fi indicator is
flashing rapidly.
Add device through network
1. Once registered, tap “Add Device” on the app’s home page, or the “+” in the upper
right corner, to add a new device through the network.
2. Select the product type from the list of options in the app (Heating & Cooling >
Heaters).
3. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the
app are connected to the same Wi-Fi network during setup.
Notes:
• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.

11
4. Ensure that the device is in pairing mode, with the Wi-Fi indicator rapidly flashing,
and tap “Next”.
5. The device will commence the pairing process and connect to the app. Ensure
your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close
until connection is complete.
6. After successfully being added, you will have the option to rename the device and
assign it to a location. It will now be listed on the app’s home page. Tap the device
listing to enter its control page.
Note:
Once connected, you can select Create Scene from the “+” in the upper right
corner (or from the Scene tab) to group connected SmarterHome™ products
and automate their functions.

12
Having trouble connecting?
The prior steps detail the process for “EZ Mode” connection. If that does not work for your
connection, we suggest trying it again, and if still no success, attempting the following
method for AP Mode connection.
Set device in AP pairing mode
Set the device in pairing mode by pressing and holding the five seconds until Wi-Fi indicator
is flashing slowly.
Using AP Mode to add device
1. Follow the previous steps to select your product type (Heating & Cooling >
Heaters).
2. Adjust your connection method by tapping on the mode type in the top-right
corner of the screen. Select “AP Mode” for the set-up type.
3. Ensure that the device is in pairing mode, with the Wi-Fi indicator slowly flashing,
and tap “Next”.
4. Enter your Wi-Fi details. It is important that your SmarterHome™ device and the
app are connected to the same Wi-Fi network during setup.
Notes:
• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.

13
Using the App
Heating Level
Heating
Hi
Lo
Child-lock
Increase temp.
ECO
Button child-lock
Settings
Set temp.
Environment temp.
ECO
Mode
ON/OFF
Count down
°C/F
Schedule
Notes:
• When device is online, it can be controlled.
• When device is offline, it displays “Offline” and cannot be remotely powered on.
Decrease temp.

14
Turn the Heater On/Off
1. Connect the heater to a power socket and turn on the main switch: the heater will
be in standby.
2. Press the power button to begin heating operation: the display will show the
current ambient temperature.
3. Press the power button to turn the heater off.
Temperature Setting
1. Press the setting button first to enter the temperature setting mode. Use the up
and down buttons to select the desired temperature (5–45°C).
2. The selected temperature will be set when there is no input for 5 seconds.
Timer Setting
1. With a timer set, the heater will turn off automatically once the set time has been
reached.
2. Press the setting button twice to enter the timer setting mode. Use the up and
down buttons to select the desired timer (in hours).
3. The current timer setting will be accepted when there is no input for 5 seconds.
High/Low Heat Mode Selection
• Press the “ ” button on the remote to toggle between high and low heating modes.
The respective indicator will be illuminated.
• To adjust the high/low temperature, on the display:
o Press the “” button.
o Press the “” button to adjust the high temperature. Press the “ ” button
to adjust the low temperature.
o Press the “” button, the temperature will flash, use the “” and “”
buttons to select the desire temperature.
o The selected temperature will be set when there is no input for 5 seconds.
OPERATION

15
Child-Lock Function
1. In heating mode, press and hold both up and down buttons on the display for 3
seconds and the child lock function will be enabled. After 5 seconds, the display
will show the ambient temperature.
2. To remove the child lock, press and hold both up and down buttons on the display
for 2 seconds again.
Display Buttons Activation
During operation, the display buttons will not be illuminated. Touch the panel below the
display and they will come on.
Eco Function (Night Mode)
1. When in either heating mode, press and hold the setting and down buttons for 3
seconds.
2. Alternatively, press the ECO button on the remote control to activate this function.
The display will then only illuminate the indicators relevant to the current
heating/timer settings.
Celsius/Fahrenheit Display
Press and hold both the setting and up buttons for 10 seconds to swap between Celsius and
Fahrenheit.
Open Window Detection
1. If the temperature decreases by 3°C or more within 2 minutes, the Open Window
Detection feature will enable and the heater will stop heating. The temperature
indicator will flash.
2. To restore normal operation, use the power button to turn the heater off, then turn
it on again after a few seconds.
Wi-Fi Reset
1. During operation, press and hold the setting button for 5 seconds.
2. Wi-Fi will now be reset, and the Wi-Fi indicator light will be flashing rapidly.
3. Connect the heater to the Kogan SmarterHome™ app following the steps from
the “Connect To SmarterHome™ App” section of this user guide.

16
Adding “SmarterHome” to the Google Home app
1. From the home page of the Google Home app, select the “+” icon to access the
‘Add and manage’ page.
2. Select ‘Set up device’, then under the Works with Google banner, select ‘Have
something already set up?’
3. Select the search bar and type ‘Smarter Home’ to locate the Kogan
SmarterHome™ service.
GOOGLE HOME CONTROL
Note:
You will ne e d to have set up a Google Home a c c o u nt pr i o r to li n k i n g your
Kogan SmarterHome™ device.

17
4. Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app
and your devices.
5. From here, you will be prompted to sign into your SmarterHome™ account using
either your email or mobile phone number, depending on which method you used
to register your account.

18
6. Once connected, the app will display any compatible devices linked to your
SmarterHome™ account. From here you can assign them to rooms and set up any
routines.
7. Tap on any of the devices to view a list of available commands.
Note:
Please note that Google Home can only control the base/core functions of any
compatible SmarterHome™devices. To make full use of this product’s smart
functionality, please use the Kogan SmarterHome™app.

19
Adding “SmarterHome” to the Alexa app
1. From the home page of the Alexa app, select the “ ” icon in the top-right and
select Skills & Games from the sidebar.
2. Select the search bar and type ‘Smarter Home’ to locate the Kogan
SmarterHome™ skill.
AMAZON ALEXA CONTROL
Note:
You will ne e d to have s et u p an Alexa account prior to linking your Kogan
SmarterHome™ device.

20
3. Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa.
4. From here, you will be prompted to sign into your SmarterHome™ account using
either your email or mobile phone number, depending on which method you used
to register your account.
5. Tap ‘Authorise’ to grant Alexa permission to access the SmarterHome™ app and
your devices.