Kohler VERDERA K-26385T User manual

1427738-T01-A
VERDERA 󶥖󴕾
INSTALLATION INSTRUCTIONS
󲰈󸀌󸎡󳻛󴁕
MIRRORED CABINET
󹒷󴛕
K-26385T/K-26386T-L
-1-
BEFORE YOU BEGIN 󲰈󷿙󱔐󱮆
© Copyright Kohler China Investment Co., Ltd. 2020
© 󲰈󸀌󵑘󴝗󵅂󶅎󱱟󽙏󱓩󲌽󽙐󳣙󸝔󴁸󹠠󱨾󱸻󳡇󴁸󾙔󾙒󾙔󾙒
ZHONGSHAN KOHLER SHOWER CO., LTD. NO13-1, XINGYE ROAD, ZHONGSHAN TORCH
DEVELOPMENT ZONE, ZHONGSHAN, GUANGDONG, CHINA POST CODE: 528437
󱓩󲶵󶅎󱱟󷼞󴭛󴁸󹠠󱨾󱸻󳉘󴄙󵲚󱓩󲶵󳃍󱓩󲶵󵂣󵄦󹜈󵯋󱴦󷇦󴑦󸤀13-1󷮽 󸻞󶧖󾙏528437
•
•
•
•
•
• Please read these instructions carefully to familiarize yourself
with the required tools, materials, and installation sequences.
Follow the sections that pertain to your particular installation.
This will help you avoid costly mistakes. In addition to proper
installation, read all operating and safety instructions.
• All information in these instructions is based upon the latest
product information available at the time of publication. Kohler
China. reserves the right to make changes in product
characteristics, packaging, or availability at any time without notice.
• These instructions contain important care, cleaning, and warranty
information-please leave instructions for the consumer.
• Before installation carefully inspect the new fixture for any signs
of damage.
• The product complies with GB/T10357.4-2013,
GB/T10357.5-2013 and GB24977-2010.
TOOLS REQUIRED 󳡇󹥯󳂥󾈸
φ6
ROUGHING-IN 󲵙󲳲󲍎
UNIT: mm
󲃓󱚅 :
ACCESSORIS LIST 󹠎󱘎󴱔󲃓
Kohler reserves the right to change marked dimensions without prior notice.
󶅎󱱟󱨾󱸻󱝫󵦕󹢺󳼨󸖎󴁍󲍎󱓩󴖦󶀱󲵙󲳲󵯔󴝗󱭖󽙓󵇽󹥯󱸢󷼇󸴁󵸔
K-26386T-L K-26385T
800
125
299599 900500
100
請仔細閱讀本指引，以便熟悉所需工具、物料及安裝程式。請遵照
適用的章節來安裝本產品，以免安裝失當導致不必要的損失。除了
有關正確的安裝方法之外，還務請詳閱所有操作及安全指引。
本指引所載之一切資料，均以印刷時所有之最新產品情況為基礎，
科勒中國保留權利隨時更改產品特性、包裝或供應情況，恕不另行
通知。
說明書包括重要的安裝、清潔及保養方面的內容，請把這些資料交
給用戶閱讀，保管。
本產品符合 GB/T10357.4-2013, GB/T10357.5-2013和
GB24977-2010。
安裝之前，仔細檢查產品是否有損傷。

-2-
1427738-T01-A
STEP2: Install the mounting bar. Place it level and fix it.
The number of screw holes is based on the actual product.
󲰈󸀌󴠁󹾗󱕦󾙏󲰈󸀌󳡻󴋪󽙓󴦃󴴸󳵳󶱭󱓟󲌟󲰬
󷷹󶣙󲮠󳷈󹂩󱗵󲳉󵒜󵅂󴴸
STEP3: Fix the cabinet
󲰈󸀌󴠁󹾗󱒵󾙏󲌟󲰬󴛕󺁩
1. Put the cabinet on the mounting bar.
1. 󲴋󴛕󺁩󳵳󲍨󳡻󴋪󱒶
2. Slide the clips to align with the drilled holes.
Fix with screws.
2.
󴶲󱱣󹭝󳢊󽙓󲴕󴴸󱒶󱒪󴠁󹾗󵯔󹗮󲮠󳎔󽙓󵥌󷷹󶣙󲌟󲰬
Top Clip
󹭝󳢊
Cabinet
󴛕󺁩
Mounting Bar
󳡻󴋪
Cabinet Installation 櫃體安裝
INSTALLATION 󲰈󷿙
STEP1: Drill holes
󲰈󸀌󴠁󹾗󱒪󹗮󲰈󸀌󲮠
Fix the mounting bar
to the wall, level the
mounting bar.
󳡻󳢶󴋪󲌟󲰬󱭞󵑔󱒶󽙓
󱝫󳥰󴦃󴴸
Mirror cabinet plus holes width
800mm and above
󹒷󴛕󲳘󳇓󾙚󾙒󾙒󱷷󱗵󱒶󱰗󴟾󲮠
≥40 mm from top part of the countertop
(such as faucet)
󸣥󴚯󹩌󴁥󺁷󺝥󽙏󲜾󴦃󺣵󹮞󳣈󳡧󽙐󾙅󾙖󾙒
L1
L 2
(1150mm) To Floor
(1150mm) 󷆹󲍱󹩌
Drill holes - Ø 6mm
󹗮󲮠 - Ø 6mm
Model
󲏵󷮽
K-26386T
K-26385T
L1
360
760
L2
360
760
L1
L2
726

-3-
1427738-T01-A
The bathroom shall be kept in good ventilation. Clean the
cabinet with water and soft cloth. Do not use detergent
containing abrasive and chemical substance.
󷼞󵥀󹜕󵱢󹂩󱝫󳥰󶉾󴥧󳿁󸴁󽙓󹒷󴛕󱸧󶾨󱛔󵥌󴩎󴁸󴱔󴦃󵯔󴾄󳃎󳲻󳥐󽙓
󱲦󱛔󵥌󱺂󵹠󵾤󱯼󱷷󱳍󲯥󵒜󸞎󵯔󴱔󴺜󱯼
警告！ 小心產品受損。
Warning! Risk of product damage.
USER MAINTENANCE 󳺝󳄜󶥖󸕠
Installation and Adjustment of Accessories 配件安裝及調節
STEP1: Install the clips. Insert the shelves between the clips.
Insert the glass shelf into the snap-in pins, insert the glass
shelf vertically upwards and then rotate to horizontal position.
󲰈󸀌󴠁󹾗󱒪󾙏󲰈󸀌󲚻󲮚󽙓󲴋󲶜󴄰󵚵󵟵󲏪󵲃󳫅󱨮󲶜󴄰󲚻󽙓󱩬󳹥󸭛
󴦃󳅷󳎔󳪁󱨮󱸢󱒪󳩘󲶜󴄰󲚻󱓩
STEP2: If needed, align the door.
󲰈󸀌󴠁󹾗󱕦󾙏󷏕󴁸󹥯󸅲󽙓󱸯󲴕󴛕󹛼󸵁󷼇󸏉󳶿
Installation of Side Mirror 側鏡安裝
STEP1: Align the brackets with the mounting holes.
󲰈󸀌󴠁󹾗󱒪󾙏󲴋󳵛󴆁󷇣󲰈󸀌󲮠󲴕󺡗
STEP2: Secure the brackets with the round-headed short screws.
󲰈󸀌󴠁󹾗󱕦󾙏󵥌󲍉󹮞󵸠󷷹󶣙󲴋󳵛󴆁󲌟󲰬
Note: When installed by cabinet splicing, side mirrors need
not be installed on the cabinet side.
󴪒󳘍󾙏󳥩󴛕󲰈󸀌󳼨󽙓󳥩󴛕󱡱󱒹󵥌󲰈󸀌󱡱󹒷
STEP3: Adjust magnifying glass.
󲰈󸀌󴠁󹾗󱒵󾙏󸏉󳶿󳵳󲚜󹒷
To adjust mirror height, slide up or down.
IMPORTANT! Rotate mirror in before closing the door.
󱒶󱒷󴶲󱱣󽙓󱗵󸏉󶔲󹒷󲮚󺁷󳇓
重要 : 󳏳󹭥󲍨󴛕󹛼󹞐󹜆󱮆󳹥󱨮󹒷󲮚
The mirror can be removed.
󳵳󲚜󹒷󱸯󱗵󳤘󱵳

󳹂󱹙
Press the button to easily
move mirror up or down
󳥾󱚊󴟾󳥾󹄭󱸯󱗵󸫭󺃕󱒶󱒷󶆑󱱣
󳵳󲚜󹒷󶡿󱘎
3
2
1