Kolpin 98317 User manual

1
© 2017 Kolpin Outdoors Inc. REV 04
Kolpin Ranger UTV Side Mirror - Pair
Product Installaon Instrucons | Part No: 98317
Please read and understand these instrucons completely before installaon to avoid injury to yourself or damage to the
vehicle or accessory
Parts List:
Kolpin Outdoors, Inc. | 9955 59th Ave N | Plymouth, MN 55442
[phone] or [phone] | www.kolpin.com | custom[email protected]
1
ITEM PART NAME SPARE P/N DESCRIPTION QTY.
1MIRROR N/A KOLPIN SIDE UTV MIRROR, LEFT 1
2MIRROR N/A KOLPIN SIDE UTV MITTOR, RIGHT 1
3BIG PAD N/A FLAT SHIM, RUBBER GRIPPING PAD 2
4WASHER N/A 1.25” OD FORMED WASHER 2
5WASHER N/A .875” OD FORMED WASHER 2
6SPRING N/A .6875” OD x .8125 LONG SPRING 2
7WASHER N/A M6 x 20mm OD FLAT WASHER 2
8NUT N/A M6-1.0 HEX NUT 2
9PIVOT N/A FEMALE MIRROR PIVOT JOINT 2
10 PIVOT N/A MALE MIRROR PIVOT JOINT 2
11 FRONT CLAMP N/A FRONT METAL CLAMP, PROFILE TUBING 2
12 NUT N/A M6 -1.0 BARREL NUT 4
13 SCREW N/A M5-0.8 x 25mm SOCKET HEAD CAP SCREW 2
14 WASHER N/A M6 X 14mm OD FLAT WASHER 4
15 WASHER N/A M6 LOCK WASHER 4
16 SCREW N/A M6-1.0 x 12mm SCREW 4
17 WASHER N/A M5 LOCK WASHER 2
18 WASHER N/A M5 FLAT WASHER 2
19 SMALL PAD N/A FLAT SHIM, RUBBER GRIPPING PAD 2
20 BACK CLAMP N/A BACK METAL CLAMP, PROFILE TUBING 2
2
17 18
3
8
7
6
5
4
20
13
9
10
15
11
12
16
14
19

2
© 2017 Kolpin Outdoors Inc. REV 04
Small pad on
back clamp
Install Preparaon:
1. Adhere the small rubber grip pad (item 19) to the inside
surface of the back clamp (item 20) as shown. The small
pad serves as a gripping pad to the vehicle prole tubing.
2. Adhere the big rubber grip pad (item 3) to the inside
surface of the front clamp (item 11) as shown. The big pad
serves as a gripping pad to the vehicle prole tubing.
Mirror Mounng:
1. Aach to desired area on UTV vehicle tube, secure front
and back clamps using M6 barrel nut (item 12), M6 at
washer (item 14), M6 lock washer (item 15) and M6 screw
(item 16).
2. Loosen M5 socket head cap screw (item 13) inside female
pivot joint (item 9) using a 4mm allen key wrench.
3. Pivot mirror to desired angle and secure M5 socket head
cap screw (item 13). You can also rotate mirror in and out
to desired viewing angle.
4. To increase the amount of force needed to rotate mirror,
simply ghten the tensioning nut (item 8) 2 revoluons.
WARNING: Do not over ghten hardware or damage can oc-
cur.
For addional assistance, please contact Kolpin customer
service department at [phone] or [phone]
or email [e-mail]
Note: If any hardware is missing, do not return to the
store. Call us to help, Toll Free 1-877-956-5746.
Pivot Screw
Tensioning Nut
M6 screw & M6 barrel nut
Big pad on
front clamp

3
© 2017 Kolpin Outdoors Inc. REV 04
One Year Limited Warranty
For the period of one (1) year from the purchase date, Kolpin will replace for the original purchaser,
free of charge, any part or parts found upon examination by Kolpin to be defective in material,
workmanship, or both.
All transportation costs incurred submitting product to Kolpin for warranty consideration must be
borne by the purchaser. If Kolpin determines that the product must be returned to the factory for
credit, please call 1-877-956-5746 for a Return Merchandise Authorization (RMA) number and
shipping instructions.
This warranty does not apply to parts that have been damaged by accident, alteration, abuse,
improper maintenance, normal wear, or other causes beyond the manufacturer’s control. In order to
protect you and your ATV, certain parts of the plow system and/or hardware are designed to fail
when the equipment is over-stressed. Parts that are lost due to loosening and improper
maintenance are not covered under warranty. This warranty does not cover removal or reinstallation
labor fees of the plow system and related components.
Peripheral products such as engines, electric motors, and actuators may carry an original
manufacturer’s warranty. Most hardware is general in nature and is easily obtained locally. Be sure
to replace with minimum metric class 8.8 specification.
Kolpin Outdoors, Inc.
Telephone: [phone]
Toll Free: (877)-956-5746
Fax Number: (800)-245-7569
www.kolpin.com
Email: customerser[email protected]