Konami Mocap Boxing User manual

n mocap boxi
4
g l
l Failure to operate the machine correctly could result in malfunction or accidents,eo please
read this manual carefully before commencing operation. Be sum to
operate the machine as
described in this manual.
l Keep this manual carefully so as to be ready for use when necessqry.
.I
/
P.N. 400814
KONAML (

About this product
Thank you for purchasing this KONAMI product. This manual expl, .ins how to operate your
game machine correctly and safely.
operation. Be sure to operate the machine as describe in this manual.
*If the machine still fails to display or to get started,
*This manual covers the following models:
l KONAMI MOCAP BOXING
“Model # 100219”
*The specifications of this product are subject to changs without notice for
reasons such as improving the performance.
*The contents of this game, its main devices and design are protected under each law
concerning patent, copyright and other intellectual properties.
*Unauthorized reproduction of this document or any of its contents is strictly
forbidden.
0 2001 KONAMI ALL RIGHTS RESERVED.

Contents
n Precautions for use
.................................................
............... 2
1 Specifications ......................................................... ...............
8
2 Name of Parts .........................................................
............. 10
3 How to play
.............................................................
............. 11
4Opening and closing doors
....................................
............. 12
5 Game settings .........................................................
............. 14
5-1 Checking the game performance........................ .............
14
5-2 Setting and adjustment of game mode ............... .............
15
5-3 Mode descriptions
............................................... ............. 16
6 Installation and assembly
.......................................
............. 26
6-l Fastening the adjusters.. .....................................
............. 26
6-2 Spreading the foot sheet
.....................................
............. 27
6-3 Attaching the foot protective guard ..................... .............
28
6-4 Mounting the sensor frame .................................
............. 29
7 Maintenance
.............................................................
............. 32
7-1 Replacing the coin selector
.................................
.............
32
7-2 Replacing the glove unit
......................................
............. 33
7-3 Resetting the circuit protector
.............................
............. 36
7-4 Adjusting the monitor ..........................................
............. 37
7-5 Troubleshooting
.................................................. ............. 38
8 Annex ........................................................................
............. 42
8-I Label locations exploded view ............................ .............
42
6-2 Wiring diagrams ..................................................
............. 47

n Precautions for use
people’s injuries and
caused when the
suggestions could result in dea
-The following graphic suggestio to be followed.
Indicates a matter which should
[ e e) kithoutfail.
e performed
1 1
*Definitions of qualified in-shop maintenance persons and industry specialist who handle this product.
in-shop maintenance persons and industry specialists are defined as follows.
Qualified in-shop maintenance persons
A qualified in-shop maintenance person must have experience in maintainin 1 amusement machines,
money changers and the like. Under the supervision of an amusement machines shop owner or
manager, he or she routinely assembles, installs, inspects and maintains the I musement machines, or
replaces their component units and consumable parts, in the amusement mechines workshop and/or
shop.
Jobs handled by qualified in-shop maintenance persons
‘Assembling, installing, inspecting and maintaining amusement machines ard money changers, and
replacing their component units and consumable parts.
echanical engineering,
and routinely maintain and repair amusement machines.
Jobs handled by industry specialist
Assembling and installing amusement machines and money changers, an
their electrical. electronic and mechanical component parts.
2
I

Precautions for use
.This product should not be set up, moved or transported by anyone of r than industry specialist
Doing so could result in injury or product damage. or and make sure that the
product is installed stably in a horizontal position.
Unstable installation may result in injury or accident.
*This product Is an indoor game machine. Never set up the game mactlne outside.
.Setting up this product outside could result in accidents or equipment failurl,.
*Do not set up the game machine near emergency exits.
.Doing so could block exits in time of emergency and could result in dea h or serious
injury.
*Do not set up the game machlne.
.Othenvise an accident or malfunction may result.
.In a place exposed to rain or moisture.
.In a place exposed to direct sunlight.
4n a place exposed to direct heat from air-conditioning and heating equipr bent, etc..
.Near hazardous flammable substance such as thinner and kerosene.
.On an inclined or uneven floor.
.Near fire extinguishing equipment.
,In a place exposed to strong vibration.
.In a place exposed to excessive dust.
.Near equipment generating strong magnetism or electric waves.
-Do not place containers holding chemicals or water on or near the game machine.
.Electrical shock or damage could be caused by water or foreign matter entering the
inside of the machine.
*Do not place objects near the ventilating holes.
.Doing so could cause the internal temperature to rise excessively, result ng in fire or
equipment failure.
*Do not bend the power cord by force or place heavy objects on It.
,Doing so could result in electric leakage or fire.
*Never plug or unplug the power cord with wet hands.
.Doing so could result in electrical shock.
*Never unplug by pulling the power cord.
.Doing so could damage the cord, resulting in electric leakage or tire.
*When opening the back door for seltlng the memory card, be sure to t rrn OFF the
main power switch and unplug the power cord.
.Otherwise an accident or electric shock may result.
8
8
8
8
8
8
8
8
e
3

Precautions for use
*Be sure to use indoor wiring for within the specified voltage ran
cord, use indoor wiring of the specified rating or more.
.Failure to do so could result in fire or equipment failure.
-Be sure to use the attached power cord.
.Otherwise a fire or machine trouble may result.
*Never plug more than one cord at a time in the electrical receptacle.
.Doing so could result in fire or electrical shock.
*Do not lay the power cord where people walk through. You may
t
over them.
,You may stumble down and get injured, or damage the power cord.
*Be sure to ground this product.
,Otherwise an electric shock or machine trouble may be caused.
*The sensor frame weighs about 11 kg (24.3 lb). Be sure to make a team
people in detaching and attaching it and to use a stepladder for
.Otherwise, an injury or accident may result. Dropping the sensor frame ma
and/or the frame itself damaged.
*Keep the specified clearances (see page 11) between the game
math
as well as other products.
,Otherwise the machine (s) cannot be ventilated well, resulting in malfuncti
*Do not apply a strong force for moving the machine.
,Otherwise, it may result in an accident or breakage of the units.
*Do not leave anything that would Interfere with playing the game.
,This may not just stand in the player’s way but also cause an accident or
space open enough for the player’s body not to hit against nearby walls or o
*Do not change the DIP switch setting of this product to other than fa
.Otherwise, the game can not be played property.
8
8
Q
8
*If there is any abnormaltty such as smoke, bad smell or abnormal rloise being
emitted from the machine, Immediately turn OFF the main power switch and unplug
the power cord from the receptacle to stop operating it.
e
:
Using the machine in abnormal conditions could result in fire or accidents.
In case of abnormality
1 Turn OFF the main power switch.
2 Unplug the power cord from the receptacle.
3 Contact your nearest dealer.
*Do not leave the power cord plugged improperly or covered with dust.
‘Doing so could result in elect&al shock or fire, so inspect the power cord monthly or more
8
frequently.
*Do not hit against the glass surface and the machine body.
,An accident may happen and you may get injured.
4

Precautions for use
*Do not use this product anywhere other than industrial areas.
Use in a residential area or an area next to a residential area could affect signal reception of
radios, television sets, telephones, etc..
*Players should be advised of the following precautions.
.Doing so could cause accidents or illness.
,Please do not play this game if
.You have been drinking. ,You are tired are sick or have been recently sick.
.You think you might be pregnant. .You exercise is medically regulated.
.You are susceptible to muscle spasms or loss of consciousness due to sounc, light or moving
pictures. ,You have any arm or wrist injury.
,This game is designed for one player only. Do not play with 2 or more people.
,When playing, please be aware of your surroundings.
l Plavers should be advised of the following precautlons during a play.
4nobservance of the precaution may cause anaccident.
1 .Do not play violently. You may get injured.
I
*Do not strikeor impact the glass cover.
.Otherwise, it may result in an unexpected accident or injury.
l If the foot sheet is wet, wipe it dry before playing.
.Otherwise, a player may tumble down by slipping while playing, resulting in injury.
*Do not strike or impact the sensor frame.
.Otherwise, an unexpected accident or injury may be caused.
*Do not plug or unplug the power cord with wet hands.
.Doing so could result in electrical shock.
*In handlina the oower cord, follow the instructions below.
&herwise>n electric leak, ftre or electric shock may result.
‘Do not damage the power cord. ,Do not modify the power cord.
.Do not bend the power cord excessively. ,Do not twist the power cord.
.Do not heat the power cord. ,Do not pull the power cord.
,130 not bind the power cord. ,Do not tread on the power con
,Do not sandwich the power cord. .Do not drive a nail into the pow
-If the power cord or power plug becomes damaged, stop using the mat
and ask your nearest dealer to replace the parts.
‘Using a damaged power cord or power plug could result in fire or electric
5
cord. )
shock.

Precautions for use
*Be sure to turn OFF the main power switch and unplug the power cord from the
receptacle before inspecting or cleaning the machine,
.Failure to do so could result in electriial shock.
*When replacing parts, be sure to use parts of the correct specificatio is. Never use
parts other than the specified ones.
Using improper parts could result in fire or equipment failure.
8
*There is high voltage inside the machine. Only the qualified indusly specialist is
allowed to open the back door. With the back door open, be very care’ul not to touch
the monltor and its nearby parts.
8
,Otherwise an accident or electric shock may result.
*Strictly refrain from disassembly and repalr of parts which are not ir dicated In this
manual, as well as settings and remodeiling.
.Otherwise, a fire, malfunction or trouble may result.
In case of any trouble, ask your nearest dealer for repairs and other se&as.
KONAMI will not assume any responsibility for damage to the product attributable to
disassembly and repair of parts which are not indicated in this manual, as well as settings
and remodelling.
*To clean the game machine, wipe it with a soft cloth dampened in a neutral detergent
and wrung out.
,Using thinner or other organic solvent or alcohol may decompose the material.
Particularly, the foot sheet (polycarbonate) may be deformed or broken.
Electrical shock or equipment failure could be caused by water entering he inside of the
machine.
*Check the glove unit once a day to make sure that
scratched and the ropes and cable assemblies are
.If you play the game with the damaged gloves, ropes
or cable assemblies, an accident may result.
*Check the ropes and cable assemblies once a day
for twists and entangles.
,If the cable a&y is left twisted, machine
trouble may result.(see the figure at right.)
*Do not paint and do not stick a seal or POP on the sensor
frame and around them.
.Otherwise, the machine may fail to play the game properly or get in
*Do not apply any oil or sticky substance, such as wax, to the top oft e foot sheet.
.Player may slip to be injured.
6

Precautions for use
*The game machine contains parts such as the monitor, electronic co nponents and
precision components which are sensitive to vibration and impact. Great care
therefore should be taken when moving and transporting the game ma:hine.
Be sure not to let the machine tlp over.
*Before moving the machlne, be sure lo turn OFF the main power switl:h, unplug the
power cord, and disconnect the power cord.
Stepping on or tripping over the power cord may result in an accident or dama ae the machine.
*Before moving the machine, be sure to separate the foot protective c uard and foot
sheet from the front cabinet and fully screw up all the adjusters. Move t re machine on
the casters.
.Othetwise, an accident, breakage or trouble may result.
*When moving the unit, use care not to apply a strong force.
.Particularly, the monitor cabinet will be broken or cause accident when it fal s to the floor.
-The monitor cabinet is very heavy. When moving it over a step or on a dlope, it should
be carried by more thatn four persons.
l When moving the unit, use care not to apply undue force to opening an 1 closing parts
as well as moving parts.
.Otherwise. injury or accident may be caused.
*When setting up, inspecting, maintaining, moving or transporting this produ
instructions set forth in this manual and perform such work safely.
*Do not remove labels of “WARNING”, “CAUTION”, etc. attached to the proc
*Do not set up, handle, inspect, maintain, move or transport this product
to the condition of “WARNING” or “CAUTION” specified in this manual.
*If a new owner is to have this product as a result of transfer, etc., be su
new owner.
7
:, follow the procedures and
under conditions equivalent
to give this manual to the

1 Specifications
291E
Specifications
Dimensions
1 Refer to the figure above : inches
1 Total weight: Approx.639 lb (excluded the foot sheet.)/
Weight 1 Sensorframe.Approx.l6kg(353lb)
3 Support: Approx.4.5kg(9.9lb)
Rated power l 315W (MAX)
consumption
Monitor 27-inch CRT-Wells Gardner 2792 (MID-RES)
Service condition Temperature 10 to 35-C (50 to 95’F), Humidity 20 to 80% (Nb dewing is allowed.)
hardware Set +-rstruction manual ,.,........, ,.......... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . This manual
-Product Registration Card . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
1
.Wrench, T-25 ton: . . .._____.......,....................,,...............
.................................. 1
.Wrench, T-15 torx
...................................................... .................................. 1
.Wrench. T-27 torx . . . . .._.....................,...........,.............
.................................. 1
Caster Set
/ .Wrench; Hex 2.5 mm ,.......___..,........,.,............,........... i....,,,........................... 1
1 ,Hex Bdt 1/4-20x16 _.....,........._............,...............,...... / _...____................,,,..... 16
Attachments
.Washer l/4
................................................................................................ 16
.Washer, Split
Lockl/4..
............................................................................. 16
Caster,
Swivel.. ............................................................................................ 4
.Keys for coin door ...................................................................................... 2
.Keys for maintenance.................................................................................
2
.AC power cord ............................................................................................
1
.Foot sheet ..................................................................................................
1
.Double-face tape for sectulna the foot sheet ........................................... 10
*If any part is defective or not found, contact your nearest dealer.
*The specifications of this product are subject to change without ntice
for reasons such as
improving the performance. 8
r

n Allowance for Carrying-in and Installation of Produci
The following allowance dimensions are necessary for Cal
31 l/Z
Provide a space of the following dimensions for installati
I
aKeep the 1
between
and wallr
products.
*Do not Ie
would int
the game.
9
1 Specifications
111111111
nq the product indoors.
of the product.
Elfled clearances
I game machine
,s well as other
se anything that
ere wlth playing

2 Names of parts
r
F
Fluorescent light sensor frame
f /
. . ..““~
tmg light
\PCB”“it

T’
3Howt;pl;; , 1
Joxing game features a posture detecting ultrasonic sensor tha shifts the viewpoint on
th?. jame screen In real trme In response to the player s body movem nt. Duck and dodge to
avoid the punches of your opponent onscreen, and land your punche on him. While wearing
the special gloves, you deliver hooks, uppercuts and jabs to the on creen boxer. You’re in
the ring! Defeat the world’s strongest boxers to get to the top of the boxing world.
n How to play
111111111111111-1111
1 Put coin(s) in the slot. The “Cautions for play” and “Start demon
and then the game gets started.
2 Put the special gloves on both hands.
.When you dodge the opponent’s punch, a marker appears. ’Land a punch on the
opponent, and his toughness gauge drops. Continue to r uce on his toughness
aauae, and you can knock him down.
t
Knock him down 3 tim sor knock him out, and
Ii,
‘Y
*itI
Id
the rounds are cleared. Now you can go to the next mater
4f the opponent punches you, your toughness gauge drops. I
will be knocked down. With 3 knockdowns or the clock run-c
.If you keep dodging the opponent’s punches without deliver
gauge increases. With the gauge half full, one punch will kr
Having the gauge full, you can deliver a single punch hard f
the gauge runs out, you
t, the game will be over.
rg a punche, the punch
ck down the opponent.
ough to knock him out.
npion and the game is3 Try to defeat six opponent boxers. You are now a world chi
cleared.
After the game is over or cleared, the overall performance resl
how your skills rate as a professional.
n Continuation of the game - - - - - - - - - - - - - -
For enabling or disabling to continue the game and for the wait tin
the settings on the “GAME OPTIONS” screen on page 21.
aRanking In the “INTERNET RANKING” program - - - - -
The internet Ranking is not available in North and South Americ
11
U
1
ts are displayed, telling
1911111111
r for continuance, make

4 Opening and closing the doow
4-l Opening and closing the maintenance door
n How to open the maintenance door - - - - - - --
- - - - - - i-
*Take care not to apply any load or impact to the mai
~AftetGIOSi~th~ md!atenancedoox&e sure to check thbt the door is locked
securely.
I
1
1
I
Insert the accompanying
maintenance key and turn it
clockwise.
2 lopen the maintenance door.
n Howtoclosethemaintenancedoor=-----1!/-------I-=
1 I
Close the maintenance door. I
2 I
Turn the maintenance key counterclockwise and dr
it out.

4 Openi! g and closing the doors
4-2 Opening and closing the coin dodr
n Opening and closing the coin door and removing theicoin box - - - - -
*Take care not to apply any load or impact to the coin c(oor when it is open.
*Securely lock the door for protection againsttheft.
*Note that the coin box is considerably heavy if it is f
II of coins.
\
#
1
2
I
Insert the attached coin door key
in the coin door and turn it
clockwise.
I
Open the coin door and take out
the coin box.
I
You will find the coin box when the
coin door is opened.
The coin counter is located under
the coin box.
13

5 Game settings
5-l Checking the game performance )
not turned ON, either.
*Do not change the DIP switch setting of the machine tt other than factory
setting.
*If an abnormality persists or the machine does
immediately turn OFF the main power switch, unplug 8power cord from
the receptacle and contact your nearest dealer.
I
n Result of test
11111-111m111111m
+
111mm1111
If test is OK
The machine goes to the game mode and the demonstrap/on game starts.
If any abnormality is detected
I
“BAD” or “ERRORappears on the screen, and the check ‘1s repeated.
If “OPTION SETTINGS BACKUP DATA ERROR.”
appears, press the test button on the service panel.
(The settings will revert to the factory settings.)
If “RECORD BACKUP DATA ERROR.“appear, press the ,,, button on the
service panel.
(The ranking record will revert to the factory setting.) (
. If “BOOKKEEPING BACKUP DATA ERROR.“appear, press the test button on
the service panel.
(The bookkeeping data will revert to the factory setting.) (
If an abnormal display continues or the machine does nc+ operate normally,
immediately turn OFF the main power switch and contact your nearest dealer.
n Se~ingthetimer~r-~~~-~-~--~-~
wr
mm-m-m-mm
If the timer is not set yet in the “BOOKKEEPING”, the folio
the screen.
ng message appears on
“PLEASE SET THE TIME FOR THE 600KKEEPING” ~up instead in the test
Without this setting,
14

5 Game settings
I
,
5-2 Setting and adjustment of game qode
Manually check and change the settings for the screen displbys and game contents
and change them as required.
n Sta~ingthetestmode-r~-~~~~~~~~~~~~~~~~~~~
I
1 Turn ON the power switch.
2 While the demonstration game is playing, press the te ‘t button on the service
panel. (Do not turn ON the power switch with the test
:’
utton held down. The
current settings, the ranking record and the “BOOKKEEP NG” date will be erased
and the machine, will revert to the factory settings.)
.The main menu is displayed on the screen.
)
I
n QUitthetestmode--------I-r---d---------
1 Press the right or left select button and select ‘GAME M
d
DE” on the main menu.
2 Press the start button.
.The screen goes back to the game mode.
n Main menu screen (basic items)---------~~--~-----
-> Page 17
-> Page 18
-> Page 19
-> Page 19
--> Page 19
-> Page 20
-z. Page 20
-> Page 21
--> Page 22
*If the time is not set yet, ‘5 4’ starts
to set the system clock.
n Selecting each mode
111111111-111
7---------
How to select each mode from the main menu
SELECT --> Press either the right or left select button.
.SET --> Press the start button.
After selecting a mode, refer to the page on which that mo
f
is described in details.
15

5 Game settings
5-3 Mode descriptions
HThe original factory settings are displayed in green; the changed settings are
displayed in red.
.Press the right or left select button to select a mode to be m dified. Press the start
button to change the setting.
”
.After the setting has been changed, select ‘SAVE AND E&h and press the start
button for entry.
“NOW SAVING” will appear, the modified settings will be
1
aved, and the screen
returns to the main menu.
4f “EXIT” is selected after the modification of the settings, he following message
will appear.
Press the right or left select button to select “YES” or “N “, and press the start
button for entry.
If “YES” is selected, the new settings will be saved with “N
1
W SAVING” displayed
and the screen will return to the main menu.
If “NO” is selected, the message “NO MODIFICATION” will appear, the modif/ed
settings will not be saved, but the main menu will show up /again on the screen.
*If “FACTORY SETTINGS” is selected and the start buttoh is pressed, all the
mode settings will revert to the factory setting.
I
16

~
5 Game settings
1
I
hecking the controls
n Mode for checking the performance of the controls.
To return to the main menu screen, press the start buttorb while pressing the left
select button.
I
-This screen is just an example
. Displaying he sl Of switches
is on.
is off.
FC (hexadecfm~
and fen. values,
madmum of -1.
.Tne right num
d
4 is kmal that
the red frame
4
upanddown.
If ths *error is ii
L %~&l button
button is held PI
f
-If “SENSOR ERROR” appears on the screen, contact yo
17

5 Game settings
n Mode for checking the glove sensor. Stretch the glove to
the glove sensor performance.
To return to the main menu screen, press the start button
f
*Anytime the glove unit has been repaired or replace
the glove reactron.
- The’l*(mdve
to the sensw lel
Ttw speedier yc
marking shifts.
The yellow verti
L
gers maximum I
Displays llw selt
-This sueen is just an example.
Check points (Make sure the following 3 points are s
*Keep the glove in a position, and make sure the level setti
.Move the glove, and make sure the settings change for tl
18
ing the glove sensor
rd the screen to check
bs sure to check 1
1 un, left-hand glove sa”so, level.
we the gtove. fhe higher the
s displayed for each of the 3
KI back, right and I&, and up
we the glove, the wider the
ar * I ” appears when the sating
ninimum.
I is in the 26000 to
3 directions,