5
DECT
GSM
4
PAIRING
Press the Trim button for 2 seconds until the blue LEDs start flashing.
Please note: When used with some phones, you will need to press the button for twice
as long (4 seconds) until you hear a beep.
Follow the instruction for connecting a Bluetooth device to your phone (as described
in the phone user guide).
Select the Konftel 60W on the device list. Enter the passkey '0000'.
If the pairing is successful, you will hear a short tone and the LEDs will stop flashing.
The Konftel 60W can store up to 8 phones (more information in the User Guide).
For other functions and information, please refer to your Konftel 60W User Guide on www.konftel.com
ConnectiontoaphonewithBluetooth
MAKING A CALL
Make a call with your telephone as usual and transfer the call from your phone to the
Konftel 60W. Please refer to your phones User Guide for instructions.
ANSWERING A CALL
When the Konftel 60W rings, press the On/off button. If the telephone rings first, wait
until your Konftel 60W rings, and then press the On/off button
ENDING A CALL
When you end the call, the Konftel 60W will switch off automatically.
MULTIPARTYCALLS
When the Konftel 60W is connected to your phone, it functions as a conference phone. It can only perform
multiparty calls through a conference bridge or a bridging service. Please contact your telephone system
administrator for further details.
PLACEMENT
You can place your Konftel 60W up to 10 metres from the telephone or
computer (depending on the surroundings). To achieve optimal performance,
the distance between the Konftel 60W and the phone should not exceed 5 meters.
DISCONNECTING THE BLUETOOTH LINK IN 'OFF'STATE
Press the Mute button to disconnect the Bluetooth link in the phone.
The link is automatically reconnected to the phone when needed.
Loudspeakers, x3
LEDs
Blue – microphone on
Blue flash – pairing
Red – microphone muted
Microphone, 360osound pick-up
Quick reference guide Konftel 60W
Only mains transformer of types
Helms-Man DEN4824129,
DPX481821 (USA) or
DBN4824129 (UK) may be
connected.
CONNECTION
Power supply
230 V / 120 V
BUTTONS
Mute button
Breifly press to mute
the microphone
+ button
Increase the
speaker volume
- button
Decrease the
speaker volume
Trim button
When you want to
tune your Konftel
60W manually.
On/off button
Transfer the call from
your phone to the
Konftel 60W
TRANSFERRING A CALL
During a call, press the On/off-button for 2 seconds to transfer the call back to your
phone.
2 sec.
2 sec./4 sec.
