Konica Minolta Di5510 Setup guide

Di5510/Di7210
Advanced Information

.

Di5510/Di7210
Contents
1 Introduction
1.1 We Want You to Be a Satisfied Customer ..................................1-1
1.2 Protecting the Environment . . ....................................................1-2
Takeback and reutilization..........................................................1-2
What is Energy Star®?...............................................................1-2
Use of Recycled Paper...............................................................1-2
1.3 Guide to this Manual.....................................................................1-3
How is this Manual Structured?..................................................1-3
A Brief Explanation of the Conventions Used in this Manual .....1-4
A Brief Explanation of Important Concepts and Symbols...........1-6
1.4 Overview of System Features ......................................................1-8
General Features........................................................................1-8
Automatic Features ..................................................................1-13
Finishing features .....................................................................1-14
Features that can only be Set Up by a Service Technician......1-15
2 Getting to Know Your System
2.1 System overview...........................................................................2-1
External System Overview .........................................................2-1
Internal System Overview...........................................................2-3
2.2 Options (Accessories)..................................................................2-4
Finisher FN-10............................................................................2-4
Finisher FN-121 (optional)..........................................................2-7
Finisher FN-115 (optional)..........................................................2-9
Punch/Z-fold Unit ZK-3 .............................................................2-12
Shift Tray OT-104 .....................................................................2-13
Cover Inserter E for Finisher ....................................................2-14
Large Capacity Cassette (LCC) C-403N ..................................2-15
Large Capacity Cassette (LCC) C-404N ..................................2-16
Hole Punch Kit PK-2/PK-5/PK-5 S-hole pattern .......................2-17
Memory Expansions .................................................................2-17
Printer Controller Pi7200e ........................................................2-17
Hard disk HDD-2 ......................................................................2-17
Total counter.............................................................................2-17

Di5510/Di7210
2.3 Safe Working with Your System ............................................... 2-18
Laser safety ............................................................................. 2-22
Internal Laser Radiation........................................................... 2-22
Safety label .............................................................................. 2-24
System serial number .............................................................. 2-28
2.4 Transporting the System ........................................................... 2-28
2.5 Installing the System.................................................................. 2-29
Environmental Requirements................................................... 2-29
Installation Site......................................................................... 2-29
Space Required for System ..................................................... 2-30
Storing Supplies....................................................................... 2-32
2.6 Connecting the system .............................................................. 2-33
Voltage and Frequency Tolerances ......................................... 2-33
2.7 Switching the System On and Off............................................. 2-34
Switching On Power Supply..................................................... 2-34
Switching Off Power Supply..................................................... 2-35
Switching On the System (daily) .............................................. 2-36
Switching Off the System (daily) .............................................. 2-37
2.8 Control Panel Keys and Indicators ........................................... 2-38
Control panel............................................................................ 2-38
Indicators and Keys on the Touch Screen ............................... 2-40
2.9 Using the Touch Screen ............................................................ 2-42
2.10 Adding Paper .............................................................................. 2-43
Refilling Trays 1 and 2 ............................................................. 2-44
Refilling Trays 3 and 4 ............................................................ 2-45
Add Paper to Paper Tray LCC - C-403N (optional) ................. 2-48
Add Paper to Paper Tray LCC - C-404N (optional) ................. 2-50
Filling the Bypass Tray............................................................. 2-52
2.11 Adding toner ............................................................................... 2-54
2.12 Replenishing the staple supply................................................. 2-57
Finisher FN-121/FN-10 ............................................................ 2-57
Finisher FN-115 ....................................................................... 2-60
2.13 Monitoring the PM Count Time ................................................. 2-63
Viewing the PM Count ............................................................. 2-63
Printing the PM Count.............................................................. 2-64
Closing the PM Count Screen.................................................. 2-64
2.14 Shutting Down the System ........................................................ 2-65

Di5510/Di7210
2.15 Note the Following Important Information................................2-66
. . . When Working with your System........................................2-66
. . . When Servicing and Repairing the System ........................2-66
2.16 Proper Use of Your System........................................................2-67
3 Initial Steps . . .
3.1 Basic Operator Steps....................................................................3-1
Entering the Number of Copies ..................................................3-1
Start Cycle ..................................................................................3-2
Stop Cycle ..................................................................................3-2
Reset System Settings ...............................................................3-2
3.2 Activating the System...................................................................3-3
Ending Energy Saving Mode ......................................................3-3
Ending Auto Shut Off..................................................................3-3
Interrupting Weekly Timer Mode ................................................3-4
Entering the E.K.C. Password ....................................................3-6
3.3 Placing the Originals on the Original Glass ...............................3-8
3.4 Feeding Originals Using the EDH..............................................3-10
Loading Equal-Sized Originals into the EDH............................3-11
Loading Mixed-Sized Originals into the EDH ...........................3-12
Place Z-folded Originals in the EDH.........................................3-14
3.5 Checking the System Settings...................................................3-15
Changing Settings ....................................................................3-16
Releasing Settings....................................................................3-18
Processing a Proof Copy..........................................................3-19
3.6 Reserving Copy Jobs .................................................................3-20
Setting up Reserve Jobs ..........................................................3-20
Calling up the Status Display....................................................3-22
Status Display Message Definitions .........................................3-23
Changing the Order of Reserve Jobs.......................................3-24
Deleting a Reserve Job ............................................................3-25
Checking the User Name of a Reserve Job .............................3-26
Calling up the List of Already Executed Jobs ...........................3-27
Opening the Noncomplete Job List ..........................................3-28
Interrupting the Setup of a Reserve Job...................................3-29
3.7 Interrupting a Copy Job..............................................................3-31
3.8 Recalling System Settings of the Last Job...............................3-34
3.9 Saving and Recalling System Settings.....................................3-35
Saving System Settings............................................................3-36
Recalling System Settings........................................................3-39

Di5510/Di7210
3.10 Check System Meter Count ....................................................... 3-41
Viewing the Meter Counts........................................................ 3-41
Printing the Counter List .......................................................... 3-42
3.11 Enabling Energy Saving Modes ................................................ 3-43
Enabling Energy Saving Mode................................................. 3-44
Enabling Auto Shut Off Mode .................................................. 3-45
3.12 Using the Bypass Tray............................................................... 3-46
Load the Paper on to the Bypass Tray .................................... 3-46
Processing Tab Papers............................................................ 3-47
3.13 Using the Help Mode .................................................................. 3-48
Open Help Topic Overview ...................................................... 3-49
Call Help for a Specific Cycle................................................... 3-50
3.14 Using Bookmark Function......................................................... 3-51
4 Basic Functions
4.1 Setting the Output Mode.............................................................. 4-1
Non Sort – Output to the Main Tray ........................................... 4-3
Sort – Output to the Main Tray................................................... 4-4
Staple – Output to the Main Tray ............................................... 4-6
Group – Output to the Main Tray ............................................... 4-9
Output to the Sub Tray............................................................. 4-11
Finishing in the Shift Tray ........................................................ 4-14
Folding, Stapling & Folding ...................................................... 4-16
Adding Front and Back Cover Sheets...................................... 4-19
Hole-Punch .............................................................................. 4-22
Z-Fold....................................................................................... 4-26
Three-Folding........................................................................... 4-29
Manual Stapling, Punching or Folding ..................................... 4-31
Output without Finisher ............................................................ 4-34
Using two Systems in Tandem ................................................ 4-38
4.2 Setting the Copy Mode............................................................... 4-43
Creating 1- and 2-sided Copies (Using the EDH) .................... 4-44
Creating 2-sided Copies (Using the Original Glass) ............... 4-46
4.3 Adjusting the contrast ............................................................... 4-49
Enabling Auto Exposure Mode ................................................ 4-50
Manually Adjusting Copy Density ............................................ 4-51
Adjusting the Image Density .................................................... 4-52
4.4 Setting the lens mode ................................................................ 4-54
Enabling Automatic Magnification Selection (AMS)................. 4-55
Selecting a Preset Zoom Ratio ................................................ 4-56
Selecting User-set Zoom Ratios .............................................. 4-57
Horizontal/Vertical Stretch ....................................................... 4-58

Di5510/Di7210
4.5 Setting the Copy Paper Size ......................................................4-59
Enabling Auto Paper Select Mode (APS) .................................4-60
Manually Selecting a Paper Tray..............................................4-61
Specifying the Paper Type/Size for the Bypass Tray ...............4-62
Specify Copy Start on Wide Size Paper for the Bypass Tray...4-64
4.6 Applying Functions.....................................................................4-66
Storing Originals (from the Original Glass)...............................4-67
Storing Originals (from the EDH)..............................................4-69
Applying 90° Rotation...............................................................4-71
Set original position (special originals) .....................................4-75
Set binding type (special originals)...........................................4-77
Setting Text/Photo Enhance (Special Originals) ......................4-79
Copying Mixed Sizes (Special Originals)..................................4-81
Copying Z-Folded Originals (Special Originals) .......................4-83
Defining Special Original Types (Special Originals) .................4-85
5 Applications
5.1 Adding inserts and cover sheets.................................................5-2
Information on Sheet and Cover Insertion..................................5-3
Procedure: Sheet and Cover Insertion .......................................5-4
5.2 Executing Chapter Mode..............................................................5-6
Information on: Chapter Mode....................................................5-6
Procedure: Setting chapters .......................................................5-7
5.3 Creating Combinations.................................................................5-9
Information on: Combination ....................................................5-10
Procedure: Creating combination .............................................5-11
5.4 Creating Booklets .......................................................................5-13
Information on: Booklets...........................................................5-13
Procedure: Creating booklets ...................................................5-15
5.5 Creating OHP Interleave.............................................................5-17
Information on: OHP Interleave ................................................5-17
Procedure: Creating OHP Interleave........................................5-18
5.6 Inserting images..........................................................................5-20
Information on: Inserting Images ..............................................5-20
Procedure: Inserting Image ......................................................5-21
5.7 Processing Dual Page Originals................................................5-23
Information on: Dual Page........................................................5-24
Procedure: Making Dual Copy..................................................5-25
5.8 Program Job ................................................................................5-27
Information on: Program Job ....................................................5-27
Procedure: Program Job ..........................................................5-28

Di5510/Di7210
5.9 Using Non-Image Area Erase .................................................... 5-30
Information on: Non-Image Area Erase ................................... 5-31
Procedure: Using Non-Image Area Erase ............................... 5-32
5.10 Creating Reverse Images........................................................... 5-33
Information on: Reverse Image................................................ 5-33
Procedure: Creating Reverse Image ....................................... 5-34
5.11 Using Image Repeat Mode......................................................... 5-35
Information on: Repeat ............................................................ 5-35
Procedure: Using Repeat Mode............................................... 5-37
5.12 Using Frame/Fold Erasure......................................................... 5-39
Information on: Frame/Fold Erasure ........................................ 5-39
Procedure: Using Frame/Fold Erasure .................................... 5-40
5.13 Using Auto Layout...................................................................... 5-42
Information on: Auto Layout..................................................... 5-42
Procedure: Using Auto Layout ................................................. 5-43
5.14 Using Full-Image Area................................................................ 5-44
Information on: Full-Image Area .............................................. 5-44
Procedure: Using Full-Image Area........................................... 5-45
5.15 Creating a file margin................................................................. 5-46
Information on: Image Shift...................................................... 5-47
Procedure: Using Image Shift .................................................. 5-48
5.16 Using Stamp/Overlay ................................................................. 5-50
Information on: Stamp/Overlay ................................................ 5-51
Procedure: Using Stamp.......................................................... 5-53
Procedure: Using Watermark................................................... 5-55
Procedure: Using Overlay........................................................ 5-57
Procedure: Overlay Memory (store image).............................. 5-59
Procedure: Overlay Memory (recall image) ............................. 5-61
6 Network functions
6.1 Server functions ........................................................................... 6-1
Storing a Job.............................................................................. 6-3
Deleting a Job ............................................................................ 6-6
Storing and Printing a Job.......................................................... 6-8
Recalling Job from Hard Drive ................................................. 6-11
6.2 Web functions............................................................................. 6-14
Starting the Web Utilities.......................................................... 6-15
Calling up System Status......................................................... 6-17
Calling up Job Status ............................................................... 6-18
Calling up and Editing Hard Drive Data ................................... 6-20
E-Mail Transmission Setting .................................................... 6-24

Di5510/Di7210
6.3 Setting up the e-mail transfer function
(Environment Setup)...................................................................6-26
6.4 Setting the E.K.C. function (Environment Setup) ....................6-29
Showing the E.K.C. function setting window ............................6-30
How to input E.K.C. data ..........................................................6-32
How to edit the E.K.C. data (password, name or limit).............6-34
How to reset an E.K.C. .............................................................6-36
How to delete E.K.C. data ........................................................6-38
How to back up the E.K.C. data in a file ...................................6-40
How to configure the E.K.C. function........................................6-43
6.5 Setting up the Scan Transmission Function
(Environment Setup)...................................................................6-45
Displaying the Scan Transmission Setting window ..................6-45
Registration of e-mail, HDD and FTP .......................................6-47
How to change the registered information................................6-49
How to delete the registered content........................................6-51
Displaying the Group Setting window.......................................6-53
How to combine the e-mail data to a group..............................6-55
How to display a list of group entries........................................6-56
How to change a group entry ...................................................6-57
How to delete a group ..............................................................6-58
6.6 Transferring or editing the file with machine settings
(Environment Setup)...................................................................6-60
Displaying the Setting File Import/Export window ....................6-61
Export file with machine settings ..............................................6-63
Import file with machine settings ..............................................6-66
Edit file with machine settings ..................................................6-68
Specifications for the individual file types for machine settings 6-69
6.7 Setting scanner transmission (key operator mode) ................6-71
7 Settings in Key Operator Mode
7.1 Overview ........................................................................................7-2
Calling up Key Operator Mode ...................................................7-2
Leaving Key Operator Mode.......................................................7-2
Overview of the Key Operator Mode Menu ................................7-3
7.2 (1) System Initial Setting ..............................................................7-5
(1) Date & Time Setting..............................................................7-5
(2) Language Select Setting .......................................................7-7
(3) IP Address Setting ................................................................7-8
(4) E-Mail Transmission Setting ...............................................7-10
7.3 (2) Copier Initial Setting..............................................................7-13

Di5510/Di7210
7.4 (3) User Setting Mode................................................................. 7-14
(1) Setting user density level 1................................................. 7-14
(2) Setting user density 2 ......................................................... 7-16
(3) Setting the Zoom Ratio (Lens Mode).................................. 7-18
7.5 (4) E.K.C. Function Setting ........................................................ 7-19
Calling up E.K.C. Mode............................................................ 7-19
(1) E.K.C. Data Edit ................................................................. 7-20
(2) E.K.C. All Count Reset ....................................................... 7-26
(3) E.K.C. Function Setting ...................................................... 7-27
7.6 (5) Program memory lock/delete............................................... 7-29
Locking and Unlocking Program Memory Positions ................ 7-29
Deleting System Settings ......................................................... 7-30
7.7 (6) Paper Type/Special Size Setting.......................................... 7-31
Specifying the Paper Type....................................................... 7-31
Specifying the Paper Size........................................................ 7-32
Set Copy Start to Wide Size Paper.......................................... 7-34
7.8 (7) Panel Contrast/Key Sound Adjustment .............................. 7-36
7.9 (8) Key Operator Data Setting ................................................... 7-37
7.10 (9) Weekly Timer ......................................................................... 7-38
Calling up Weekly Timer Mode ................................................ 7-38
(1) Weekly Timer On/Off Setting.............................................. 7-39
(2) Timer Setting ...................................................................... 7-40
(3) Timer Action On/Off Setting................................................ 7-43
(4) Lunch Hour Off Setting ....................................................... 7-45
(5) Timer Interrupt Password Setting ....................................... 7-46
7.11 (10) Control Panel Adjustment .................................................. 7-47
7.12 (11) Set Auto Tray Selection...................................................... 7-48
7.13 (12) Energy Saver Setting .......................................................... 7-49
7.14 (13) Memory Switch Setting....................................................... 7-50
Changing Settings.................................................................... 7-50
Overview of Settings ................................................................ 7-51
7.15 (14) Machine Management List Print ........................................ 7-56
7.16 (15) Call Remote Center ............................................................. 7-58
7.17 (16) Side 2 Lens Adjustment ..................................................... 7-60
7.18 (17) Finisher Adjustment ........................................................... 7-61
7.19 (18) HDD Management Setting .................................................. 7-63
(1) Password List/Delete ......................................................... 7-63
(2) JOB Auto Delete Period Setting ......................................... 7-65
(3) State of HDD Capacity ....................................................... 7-66

Di5510/Di7210
7.20 (19) Scan Transmission Object Change/Delete........................7-67
7.21 (20) Non-Image Erase Area Setting ...........................................7-67
7.22 (21) Background adjustment......................................................7-68
7.23 (22) Timing adjustment...............................................................7-69
7.24 (23) Centering adjustment..........................................................7-71
8 Troubleshooting
8.1 If Your Copy Is Incorrect ..............................................................8-1
8.2 Your System Is Not Working Correctly.......................................8-3
8.3 If the PM Call Message is Displayed ...........................................8-5
If the System No Longer Operates .............................................8-5
If the System Still Operates Partially ..........................................8-6
8.4 If the Memory “Overflows”...........................................................8-7
. . . While the Current Job is Under Way ....................................8-7
. . . During Setup of a Reserve Job ............................................8-7
8.5 If the “Please switch OFF/ON” Screen Appears ........................8-8
8.6 Clearing a Paper Jam....................................................................8-9
8.7 Emptying the Waste Container..................................................8-10
Hole Punch Unit PK-2...............................................................8-10
Hole Punch Unit PK-5/PK-5 Swedish hole pattern ...................8-12
Punch/Z-fold Unit ZK-3 .............................................................8-14
9 Appendix
9.1 System maintenance ....................................................................9-1
Cleaning System Parts ...............................................................9-1
Cleaning the Original Cover and Original Glass.........................9-2
9.2 Specifications................................................................................9-3
System Di5510/Di7210...............................................................9-3
Electronic Document Handler (EDH-7).......................................9-5
Finisher FN-121/FN-10 (optional)...............................................9-5
Finisher FN-115 (optional)..........................................................9-6
Shift Tray OT-104 (optional) .......................................................9-6
Cover inserter E (optional for the Finisher FN-121/FN-10).........9-7
Hole Punch Unit PK-2/PK-5........................................................9-7
Punch Kit PK-5 Swedish hole pattern.........................................9-8
Punch/Z-fold Unit ZK-3 (optional) ...............................................9-8
Large Capacity Cassette C-403N (optional)...............................9-9
Large Capacity Cassette C-404N (optional)...............................9-9
9.3 Supplies .......................................................................................9-10

Di5510/Di7210
9.4 You Can Process This Paper..................................................... 9-11
. . . with Paper Trays 1 and 2 ................................................... 9-11
. . . with Paper Trays 3 and 4 ................................................... 9-12
. . . with the Large Capacity Cassettes LCC (optional) ............ 9-13
. . . with the Bypass Tray.......................................................... 9-14
. . . with the Automatic Duplex Unit .......................................... 9-15
. . . with the sub tray (without finisher) ..................................... 9-15
. . . with the Cover Inserter E (optional) ................................... 9-16
. . . with Punch/Z-fold Unit ZK-3 (optional) ............................... 9-16
. . . with the Hole Punch Kit PK-2/PK-5/PK-5 Swedish hole
pattern (optional)...................................................................... 9-17
. . . with the Shift Tray OT-104 (optional) ................................. 9-17
. . . with the Finishers FN-121/FN-10/FN-115 (optional) .......... 9-18
9.5 CE Marking (Declaration of Conformity) .................................. 9-19
9.6 Index ............................................................................................ 9-20

Introduction 1
Di5510/Di7210 1-1
1 Introduction
1.1 We Want You to Be a Satisfied Customer
Thank you for choosing a Konica Minolta System.
To ensure the best performance and effective use of your system,
this manual provides information on the following topics:
GStandard operator procedures
GBasic functions
GSpecial applications
GSettings in key operator mode
GTroubleshooting
Please read this manual carefully before using your system. Always keep
the manual within reach. A holder for the manual is attached to the back
of the system.
For further information and assistance in the event of difficulties, please
contact:
Gyour Konica Minolta technical representative;
Please keep the serial number (located on the system's rating plate) and
the system's date of purchase handy to ensure fast, accurate assistance
in the event of difficulties.
. . . because we want you to be a satisfied customer.

1Introduction
1-2 Di5510/Di7210
1.2 Protecting the Environment . . .
Konica Minolta supports the challenge maintaining the environment and
does all that it can to actively participate in preventing and resolving
ecological problems. Our production is certified with ISO 9000 (quality
management) and ISO14001 (environment management).
Takeback and reutilization
Used devices, empty toner and drum units and used toner and drum units
are taken back by a local Konica Minolta partner and processed for
recycling and reutilization of materials. For more information,
call 08 00 / 6 46 65 82 (free of charge).
What is Energy Star®?
After long periods of idleness, Energy Star®systems switch to Energy
Saver Mode or turn themselves off. This function can reduce the annual
energy costs for the unit by up to 60%.
Systems with a high copying speed automatically switch to 2-sided
copying mode. This reduces the costs for paper and the volume of paper
consumed.
Did you know that manufacturing a sheet of paper requires 10 times as
much energy as making a copy?
The conservation of paper thus also has a direct global effect on the
conservation of energy.
This system complies with the Energy Star®energy efficiency criteria.
Use of Recycled Paper
This system is designed to use recycled paper that conforms to
CEN/CLC 12281 or DIN 19309. Your local Konica Minolta representative
will be pleased to provide more information.

Introduction 1
Di5510/Di7210 1-3
1.3 Guide to this Manual
How is this Manual Structured?
If you are not sure where to locate the information you need, please refer
to this section. The following table will help you. For detailed information
on specific issues, refer to the index at the end of the manual.
No. Chapter Description
1 Introduction This chapter contains introductory information,
especially for the effective use of this manual.
2 Getting to Know Your
System
This chapter will familiarize you with your system and
its features:
• System layout
• Safe working with the system
• Connecting the system
3 Initial Steps . . . This chapter shows you how to carry out frequent
operating tasks, such as:
• Loading originals
• Starting the copy cycle
• Reserving jobs
4 Basic Functions This chapter describes how to choose basic system
functions to suit your needs, such as:
• Adjusting the contrast
• Setting the lens mode
• Setting the copy paper size
5 Applications This chapter shows you how to use special
applications correctly, such as:
• Adding inserts and cover sheets
• Creating Reverse Images
• Creating a file margin
6 Network Functions This chapter explains how to go about storing files in
the hard drive (optional) and discusses the system
monitoring using the web utilities.
7 Settings in Key Operator
Mode
In this chapter you will learn how to change the
default settings of the system.
8 Troubleshooting This chapter contains tables and instructions to help
you recognize faults and eliminate malfunctions.
9 Appendix The appendix contains a collection of useful
supplementary information such as:
• System maintenance
• Specifications
• Index

1Introduction
1-4 Di5510/Di7210
A Brief Explanation of the Conventions Used in this Manual
A variety of conventions and types of illustrations are used for special
emphasis in this manual. The following examples show the most
important conventions and how to respond to them.
DANGER
This is a danger warning!
The danger warning points out a danger of potentially serious injury or
death. Not observing the danger warning can lead to serious personal
injury.
§The arrow marks the precautionary measure required to avoid the
danger.
WARNING
This is a warning!
The warning points out a hazardous situation for persons and/or products.
Not observing the warning can lead to personal injury and/or serious
damage to the system.
§The arrow marks the precautionary measure required to avoid the
danger.
CAUTION
This is a caution!
The caution points out a potential and dangerous situation. Not observing
the caution can lead to personal and/or system damage.
§The arrow marks the precautionary measure required to avoid the
danger.

Introduction 1
Di5510/Di7210 1-5
[START] e.g. control panel key [START] = key on the control panel
e.g. key [Start] = key on the touch screen
ERROR Message on the display panel with the text ERROR
§Individual action to be performed
(no further steps)
A list begins:
GThese bullets indicate a list.
GLists with bullets are not in any specific order.
HWhere a list with white bullets follows a list with black bullets, the white
bullets are ranked below the black bullets.
H
GThis is the end of the list.
1Step 1 of a sequence of actions
2Step 2 of a sequence of actions
?This is additional assistance.
§The action described here is
sure to achieve the results you
desire.
3Step 3 of a sequence of actions
HThis bullet indicates a list within
a sequence of actions.
H

This is a helpful hint
Texts highlighted in this manner contain useful little tips and tricks for
the copying process.
This will show you what
needs to be done

1Introduction
1-6 Di5510/Di7210
A Brief Explanation of Important Concepts and Symbols
Paper feeding direction, length and width, lengthwise and crosswise are
standard terms. They are defined below.
Original and copy
The original is the document being duplicated by the copy cycle.
Feeding direction
The feeding direction is the paper's path through the system.
Width and length
Whenever paper dimensions are specified in the User Manual, the first
value always refers to the width of the paper (side A) and the second to
the length (side B).
Original
(document to be copied)
Copy
(copy of the original document)
Copy cycle
enlarge,
reduce,
sort
21 x 29.7 cm
Length of the paper
(side B)
Width of the paper
(side A)

Introduction 1
Di5510/Di7210 1-7
Lengthwise and crosswise
If side A of the paper format is shorter than side B, this is referred to as
lengthwise. The size label is specified with an “R” e.g. A4R.
If side A of the paper format is longer than side B, this is referred to as
crosswise. The size is not identified in any more detail, e.g. A4.

Size data with or without “R”?
Lengthwise sizes are specified with an “R”. If it is clear which direction
the size has to be inserted (e.g. A3 can only be fed lengthwise), the
“R” is omitted.
Lengthwise Crosswise
21 x 29.7 cm 29.7 x 21 cm
A4R A4

1Introduction
1-8 Di5510/Di7210
1.4 Overview of System Features
This system can be used in various ways:
Gas a copier,
Gas network printer using a printer control device (optional),
Gas a printer server on a network operating system.
The device is designed for an average volume of 60,000 (Di5510) or
100,000 (Di7210) printouts per month.
The digital technology and the memory capacities of this system give it a
range of features that goes far beyond common copier functions.
The following pages provide an overview of the range of features offered
by this system.
General Features
Auto Layout
Automatic centering of a copy on the paper.
Booklet
Combine A4 originals (1-2 or 2-2) into A5 or A4 booklets.
Chapter
Automatically copy previously specified chapter titles on right-hand
pages. This feature is only available in duplex mode (1-2).
Combination
Copy 2, 4 or 8 originals onto a single paper sheet.
Contrast Range
Configure up to nine contrast ranges for four copy modes (automatic,
increase contrast, photo and text).
Dual Page
Copy two pages from an open book onto two single A4 pages (1-1) or onto
one A4 page (1-2). You can also combine this feature with the cover
feature.
Duplex
Make 2-sided copies from 1 or 2-sided originals.
E-mail feature for sending system messages
Send e-mails to a system administrator, e. g. in the event of faults or
running out of consumables.
Energy saving
Save energy with energy saving function and automatic shut off.