Kubota K6056-8200-0 User manual

1
To avoid personal injury or death:
APark the machine on a hard and level surface.
AApply the parking brake.
AStop the engine and remove the key.
BParts List
REF. No. PART No. PART NAME Q'TY REMARKS
<1> K6056-8211-0 STAND, LH 1
<2> K6056-8212-0 STAY, STAND, LH 1
<3> K6056-2186-0 BOLT, U, STAND 1
<4> 02131-50100 NUT 2 M10
<5> K6056-8221-0 STAND, RH 1
<6> K6056-8222-0 STAY, STAND, RH 1
<7> 05122-50840 PIN, JOINT 2 8 x 40
<8> 05516-50800 PIN, SNAP 2
<9> 01123-50820 BOLT, SEMS 3 M8 x 20
<10> K6056-9509-0 MANUAL, INSTRUCTION 1 This paper
INSTRUCTION MANUAL
STAND KIT (K6056-8200-0)
for KUBOTA GRASS CATCHER GCK60-23BX
Code No. K6056-9509-1PRINTED IN U.S.A.

2
BAssembly
A< > : Ref. No. of Parts List.
1. Attach the stand stay LH (1) to the rear support frame (4) with the U-bolt (2) and nuts (3).
(1) Stand stay LH <2>
(2) U-bolt <3>
(3) Nuts <4>
(4) Rear support frame

3
2. Attach the stand stay RH (1) to the blower frame (3)
with the bolts (2).
3. Attach the stand LH (1) to the stand stay LH (4) with
the joint pin (2) and snap pin (3).
4. Attach the stand RH (1) to the stand stay RH (4) with
the joint pin (2) and snap pin (3).
(1) Stand stay RH <6>
(2) Bolts <9>
(3) Blower frame
(1) Stand LH <1>
(2) Joint pin <7>
(3) Snap pin <8>
(4) Stand stay LH <2>
(A) "FRONT"
(B) For BX1850
(C) For BX2350, BX24
(1) Stand RH <5>
(2) Joint pin <7>
(3) Snap pin <8>
(4) Stand stay RH <6>
(A) "FRONT"
(B) For BX1850
(C) For BX2350, BX24

4
BDirections for Use
1. Set the holes of the stands LH and RH in order to get
the grass catcher's mount bars (1) and the tractor's
support hooks (2) at the same level.
2. Move the tractor so that the grass catcher's mount
bars (1) get caught by the tractor's support hooks (2).
3. Connect the top link tightly to the grass catcher.
(1) Make the top link the longest length, and install it
to the rear support frame with the top link pin and
lynch pin.
(2) Mounting the universal joint to the PTO shaft by
shortening the top link.
(1) Mount bar
(2) Support hook
(A) "MOVE"
(1) Top link
(2) Lynch pin
(3) Top link pin
(4) Rear support frame
(1) Top link
(2) Universal joint
(3) PTO shaft
(A) Hole

5
AWhen installing the universal joint, make sure that the
hole (A) is facing up.
4. Install the plate LH to the mount bar on the left side of
the blower frame.
5. Install the mounting pins to the holes by adjusting the
top link length.
AMake sure that the left and right mount bars are tightly
caught by the support hooks before getting the stands
LH and RH tucked in their storage positions.
(1) Plate LH
(2) Mount bar
(1) Mount pin
(1) Mount bar
(2) Support hook

6
6. Get the stands LH and RH (1) tucked in their storage
positions.
BRemoving the Grass Catcher
To avoid personal injury or death:
ADisengage the PTO, stop the engine, remove the
key, and wait for all moving parts to stop.
1. Remove the mount pins and plate LH.
2. Remove the universal joint by lengthening the top link.
3. Draw out the top link pin and remove the top link.
AWhen it is hard to remove the top link pin, lift up the
grass catcher slightly and remove the top link pin.
(1) Stand LH <1>
(2) Joint pin <7>
(3) Snap pin <8>
(1) Stand RH <5>
(2) Joint pin <7>
(3) Snap pin <8>
(1) Grass catcher (A) "LIFT UP"