KUGOO KIRIN MINI2 User manual

EN
Electric Scooter
USER MANUAL
KUGOO KIRIN MINI2

Thank you for purchasing KUGOO KIRIN MINI2 Electric scooter
In order to ensure safety of you and others, please read the instruction before you use it.
There might be slightly dierent between the product and the picture
4.Battery charge
4.1 How to charge
4.2 Battery standard
5.Usage
5.1 Riding teaching
5.2 Practice guidelines
6.Cleaning and maintenance
6.1 Cleaning
6.2 Storing
6.3 Transport
7.Maintaining
1.Basic information
1.1 Important information
1.2 Safety warning
1.3 Scrap disposition
1.4 Product standard
2.Product introduction
2.1 Packing List
2.2 Diagram of KUGOO KIRIN MINI2
2.3 Button information
2.4 Display information
3.Fold and assemble the E-scooter
3.1 Handlebars assemble
3.2 Kickstand of E-scooter
3.3 Fold and unfold the E-scooter
Catalogue

Purchase Data:
Scooter Code:
Chapter 1
Basic information
This instruction is including the function, usage and maintaining of the KUOO KIRIN MINI2. Please prepare your
purchase information before contacting the customer service, because it is needed during the process.
please obey the rules in this instructionplease obey the rules in this instruction
1.1 Important information
Make sure to wear the protective sets(helmet, elbow pads, knee pads, ect.)
You must obey the law when riding the e-scooter. Users have to take risks and responsibilities. It includes, but
are not limited to muscle injuries, fractures, lacerations, serious injuries and death, and other risks that may be
associated with the riding of the e-scooter.
(on the bottom of the scooter)

1.3 Scrap disposition
Do not burn, bury or drop the e-scooter with the household garbage. If the battery is broken or got re, It will
cause danger and environment pollution. Please obey the rules and dispose it carefully.
Safely dispose the package. It is dangerous for kids and pets.
Checking the wholeness of the product, If any parts are missing, please contact the seller.
If there is any damaged, please don't use it.
Please use the standard charger.
Look after your kid if he or she rides the e-scooter.
Only use the components from our company.
Be careful with the electricity. No water or liquid contacted.
Use a dry cloth to remove dust. Do not spray liquid onto product.
Do not immerse the product, any of its components or accessories in water.
Do not use on the stairs.
The e-scooter could only take one person.
Cover the product to prevent dust. Do not store it in a dusty environment, which may cause damage.
Do not ride in areas with re hazards.
1.2 Safety warning

1.4 Product standard
854 x 420 x 340mm
854 x 420 x 980mm
8.9kgs
65kgs
≤15°
Smooth road, slope less than 15°
25°C
-10°C to 50°C
15 km / h
15km (load: 50kg)
8-inch Solid tyre
6.5-inch "Solid tyre
18650 Rechargeable lithium ions/18650
Overcharge, over discharge, overheat automatically shut down
21.6V 4Ah
86.4Wh
AC100-240V 50/60Hz
DC 25.2v 1a
4-5 Hours
Folded Size
Unfold Size
Net Weight
Maximum load
Grade ability
Suitable terrain
Operating temperature
Storage temperature
Maximum speed
Cruising distance
Front tyre
Rear tyre
Type
Battery protection type
Voltage and current
Total Power
Input voltage
Output voltage
Charging Time
Speed and mileage
Tyre
Battery Parameter
Charger parameters
Specication
Product performance
Items Details Parameters

Chapter 2
Product introduction
2.1 Packing List
2.2 Diagram of KUGOO KIRIN MINI2
Front wheel
Front axle
Foot pedal
Kickstand
Charging port
Reective warning sticker
Rear wheel
Handle
Finger electronic handbrake
Folding hook
T-column riser
Folding holder
Folding latch
Front fork
Foot accelerator
Shock pad
LED display and switches
Folding lock
Rear fender
1
2
3
The actual product details and specications due to product upgrading and optimization shall be subject to change without notice
4
5
6
8
7
9
10
11
12
13
14
15
16
17
18
19
2
1
3
4
5
6
7
1413
810 11 12
1918171615
9
KIRIN MINI2 e-scooter x1
Handle x2
Charger x1
Instruction x1

1
2
Indicates the speed mode: Mode 1- blue; Mode 2- red and blue; Mode 3- red.
Indicates the remaining battery
Power: 3-5seconds to turn on or o
Mode: After power on, click the on/o button to choose mode 1, 2 or 3
2.4 Display information
2.3 Button information
KIRIN MINI2 have dierent parts of the display, you have to know them before your riding.
1
1
2
3
B RB/R
if there is no power please stop and turn o the power.
3

Chapter 3
Fold and assemble the scooter
Please ensure that the power of KIRIN MINI2 has been turned o before assembling the scooter.
Most of the parts have been assembled before leaving the factory. A few parts are required to be assembled
before riding.
1
2
Find the kickstand beside the pedal
Push the kickstand down
3.2 Kickstand of E-scooter
3.1 Handlebars assemble
Tighten in the direction of the arrow
1
2

1
2
3
4
5
6
3.3 Fold and unfold the E-scooter
Press down on the rear fender.
Release the folding hook latch.
Lift the steering column to the third position.
Turn the steering column about 45 degrees in the direction of the arrow.
Press harder while turning up the steering column & make sure the front folding locked well.
First lift the steering column, reset the folding button, and second turn the pole to straighten.
The above is the unfolding process of the scooter. If you need to fold,just reverse the process.
1
2
4
5
3
6
first
second

Chapter 4
Battery charge
4.1 How to charge
Turn o the scooter before you start to charge.
Find the socket.
Use the right charger.
The light will be red while charging.
The light will be green when charging completed.
If it is the rst charge, please charge the E-scooter at least 4 hours before using.
Under no circumstances should you use a scooter while charging.
Do not charge for longer than necessary. The standard charging time is about 4.5 hours (4ah battery).
Charging too long can aect battery life and performance.
To extend battery life, charge it at least every two months.
Please charge the scooter before use.
1
2
3
4
5

4.2 Battery standard
Rechargeable lithium ions
4-5 hours
21.6V
4Ah
-10°C to 40°C
5°C to 45°C
-20°C to 50°C
86.4Wh
Overcharge, overdischarge, overheat automatically shut down
Type of the battery
Charging time
Voltage
Battery capacity
operating temperature
Charging temperature
storage temperature
KWh
Protection
Chapter 5
Usage
Before riding the KIRIN MINI2, please read the following information.
You have to wear the helmet and other protective clothing.
Only under 65Kg are allow.
Obey the local law.
The KIRIN MINI2 contains the motor, which may be classied as a motor vehicle according to your local
regulations. It is your responsibility to comply with local regulations.
Components Parameter

Press the electronic handbrake and step on the rear fender with
your foot at the same time to slow down or stop the scooter. Be
very careful when you get o.
Turn the handle with both hands.
Hold the handle bars with both hands,put the right
foot on the acceleration, and slide by the left foot to
make the e-scooter move.
5.1 Riding teaching
Suppose you are wearing appropriate protective gear and have placed your scooter on a level road with
sucient power, follow these steps.
Step on acceleration Harder, faster Release to slow down
Press
Turn right
Turn left
To turn o the scooter, hold down the power button for 3 to 5 seconds after full stop for a few seconds.

5.2 Practice guidelines
Please practice riding until you can easily use all scooter functions. See the tips below.
Avoid passing through anything that may stick on or stuck in the wheels.
Wear fat shoes for fexibility and stability.
Keep practising until you can easily get on, forward, turn, stop and get of.
Riding on the road with a 15 degree slope is OK for KIRIN MINI2, but not recommended.
KIRIN MINI2 is preferred to relatively fat road conditions.
Do not ride on slopes, pedestrians or obstacles until you are profcient with the scooter.
The KIRIN MINI2’s weight is about 8.9KGs. Remember to fold the scooter before you pick it up.

Chapter 6
Cleaning and maintenance
6.3 Transport
Close and fold the scooter before moving, lifting, or transporting it (see section 3.3 for instructions).
When lifting the whole scooter, please note the weight of KIRIN MINI2 is about 8.9KGs.
6.2 Storing
To store KIRIN MINI2, please follow the below instructions:
6.1 Cleaning
After long time riding, you need to clean it to ensure the KIRIN MINI2 works well.
Turn o the scooter before cleaning.
Use dry cloth to scrub it.
Avoid contacting from liquid.
Do not use alcohol and detergent.
Do not spray the liquid directly on any part of the scooter.
Please charge it before you store it.
Charge it every 2 month.
Cover KIRIN MINI2 to prevent dust.
Do not store it in a dusty or moisture environment, which may cause damage.

Chapter 7
Maintaining
Your KIRIN MINI2 electric scooter is warranted to the original owner for one year from the date of purchased
against defects in material and workmanship under normal use and service.
This warranty gives you specic legal rights and you may have other rights depending on local laws. This
warranty lasts for one year from the date of purchase.If the product is repaired or replaced, the warranty period
will not be extended.This warranty only covers technical hardware defects under normal use conditions during
the warranty period.
Statement: we are not responsible for the accidental use of this product and its liability will not exceed the
purchase price of the product in any condition.
Guarantee does not include
(a)transport (b) store (c)usage (d)don t obey the instruction (e)change (f)repair without
authorization (g) abrasion (h)accident

DE
KUGOO KIRIN MINI2

Vielen Dank, dass Sie sich für ein KUGOO KIRIN MINI2 ElektroScooter (E-Roller) entschieden haben
Lesen Sie die Anweisungen, bevor Sie sie verwenden, um die Sicherheit von Ihnen und anderen Personen zu
gewährleisten.
Möglicherweise unterscheiden sich das Produkt und das Bild geringfügig voneinander
4.Batterieladung
4.1 Wie wird aufgeladen?
4.2 Batteriestandard
5.Verwendung
5.1 Fahrtunterricht
5.2 Übungsrichtlinien
6.Reinigung und Wartung
6.1 Reinigung
6.2 Aufbewahrung
6.3 Transport
7.Pegen
1.Grundlegende Informationen
1.1 Wichtige Informationen
1.2 Sicherheitshinweis
1.3 Entsorgung von Schrott
1.4 Produktstandard
2.Product introduction
2.1 Containerladeliste
2.2 Diagramm von KUGOO KIRIN MINI2
2.3 Tasteninformationen
2.4 Informationen anzeigen
3.Falten und montieren Sie das Scooter
3.1 Lenker montieren
3.2 Ständer des Elektrorollers
3.3 Falten und entfalten Sie den Elektroroller
Katalog

Kaufdaten:
Scootercode code:
Kapitel 1
Grundlegende Informationen
Diese Anleitung erklärt Ihnen die Funktion function Nutzung und Wartung des KUGOO KIRIN MINI2. Bitte
bereiten Sie Ihre Kaunformationen vor, bevor Sie sich an den Kundendienst wenden, da die Informationen für
diesen Vorgang benötigt werden.
Bitte beachten Sie die Regeln in dieser Anleitung
1.1 Wichtige Informationen
Um Ihre Sicherheit zu gewährleisten, lesen Sie bitte alle Warnhinweise in der Anleitung.
Stellen Sie sicher, dass Sie die Schutzkleidung tragen (Helm, Ellbogenschützer, Knieschützer usw.)
Beim Fahren mit dem E-Scooter müssen Sie die Gesetze beachten. Die Anwender müssen Risiken und
Verantwortung übernehmen. Dazu gehören, sind jedoch nicht beschränkt auf, Muskelverletzungen,
Knochenbrüche, Platzwunden, schwere Verletzungen und Tod, sowie andere Risiken, die mit dem Fahren des
Elektrorollers verbunden sein können.
(auf der Unterseite des Scooters)

1.3 Entsorgung von Schrott
Sie konnten es nicht verbrennen oder mit dem Hausmüll entsorgen. Wenn die Batterie defekt ist oder ein Feuer
ausbricht, kann dies zu Gefahren und Umweltverschmutzung führen. Sie müssen die Gesetze befolgen und
diese sorgfältig verwahren.
Entsorgen Sie die Verpackung sicher. Es ist gefährlich für Kinder und Haustiere
Vollständige Überprüfung des Produkts. Wenn Teile fehlen, wenden Sie sich bitte an den Verkäufer
Wenn es irgendwelche Schäden gibt, benutzen Sie es bitte nicht
Verwenden Sie das richtige Ladegerät
Kümmere dich um dein Kind, wenn es das Produkt benutzt
Verwenden Sie nur die Komponenten aus unserem Hause
Sei vorsichtig mit der Elektrizität. Kein Wasser oder Flüssigkeit angeschlossen
Staub mit einem trockenen Tuch entfernen. Sprühen Sie keine Flüssigkeit auf das Produkt.
Tauchen Sie das Produkt, seine Komponenten oder Zubehörteile nicht in Wasser
Nicht auf der Treppe benutzen
Das Scooter konnte nur eine Person aufnehmen
Decken Sie das Produkt ab, um Staub zu vermeiden. Bewahren Sie es nicht in einer staubigen Umgebung
auf, da dies zu Schäden führen kann.
Warnung - Brandgefahr - Benutzer nicht wartbar damage.
1.2 Sicherheitshinweis