Kuppersberg FA6VS02 Installation and maintenance instructions

TECHNICAL PASSPORT
ПАСПОРТ ТЕХНИЧЕСКОГО ИЗДЕЛИЯ
FA6VS02
ELECTRIC HOB
ЭЛЕКТРИЧЕСКАЯ ВАРОЧНАЯ ПОВЕРХНОСТЬ

2
TECHNICAL PASSPORT ENGLISH
Electric Hob
DEAR USER .................................................................................................................................. 3
DESCRIPTION OF THE HOB............................................................................................... 4
USE ................................................................................................................................................... 5
BASIC FUNCTIONS .................................................................................................................. 7
CLEANING..................................................................................................................................... 9
INSTALLATION .......................................................................................................................... 9
TECHNICAL CHARACTERISTICS OF THE ELECTRICAL COMPONENTS..... 13
TECHNICAL ASSISTANCE AND SPARE PARTS.......................................................... 14
TROUBLESHOOTING –PROBLEM SOLVING ............................................................. 14
CONTENTS

3
ENGLISH TECHNICAL PASSPORT
Electric Hob
DEAR USER,
We are sincerely grateful to you for purchasing one of our products.
We are sure that this modern, functional and easy to use appliance,manufactured
with the top-quality materials and components will satisfy all your needs.
We ask you to read carefully the instructions of this manual.
The appliance must be installed only by a qualifi ed electrician in compliance
with the instructions provided. The manufacturer declines all responsability for
improper installation.
The manufacturer is not responsible for any transcription errors or misprints
contained in this handbook and, furthermore, reserves the right to make any
modifi cation on the products, which might be deemed necessary or usefull, this
being in the user’s interest, without altering their basic operating or safety features.

4
TECHNICAL PASSPORT ENGLISH
Electric Hob
DESCRIPTION OF THE HOB
FA6VS02
Guide to Using the
Instructions Booklet
You should keep the Guarantee
Certifi cate or, where relevant, the
technical datasheet,together with the
Instruction Manual for the duration
of the useful life of the appliance. It
has important technical information
about the appliance.
Safety instructions
Before fi rst use, you should carefully
read the installation and connection
instructions.
These hob models may be installed
in the same kitchen furniture units as
company brand ovens. For your safety,
installation should be carried out by
an authorised technician and should
comply with existing installation
standards. Likewise, any internal work
on the hob should only be done by
company technical staff, including the
change of the  exible supply cable of
the appliance.
Safety warnings:
If the ceramic glass breaksor
cracks, immediately unplug the
appliance to avoid electric shocks.
This appliance is not designed to
work with an external timer (not built
into the appliance) or a separate remote
control system.
Do not steam clean this
appliance.
The appliance and its accessible
parts may heat up during operation.
Avoid touchingtheheating elements.
Children younger than 8 years old must
stay away from the appliance unless
they are permanently supervised.
Children who are 8 years
old or older, people with impaired
physical, sensory or mental abilities,
or those who are lack of experience
and knowledge may use this appliance.
ONLY whentheyare supervised or if they
have beengivenadequate instruction
on the use of the appliance and
understand thedangersitsuse involves.
User cleaning and maintenance may not
be done by unsupervised children.
Children must not play with the
appliance.

5
ENGLISH TECHNICAL PASSPORT
Electric Hob
Precaution. It is dangerous
to cook with fat or oil without being
present, as these may catch fi re. Never
try to extinguish a fi re with water! In
this case disconnect the appliance and
cover the  ames with a lid, a plate or a
blanket.
Do not store any object on
the cooking areas of the appliance .
Preventa possible fi re hazard.
Do not use plastic pots or
alliminium sheets
Do not use hob as a
supplamentary surface
Dry the bottom of the pot before
put in on the cooking zones
Do not scrape the pot against
the glass to avoid damaging it
Use pots with the same diameter
of cooking zones
USE
COOKTOP CONTROLLED BY
TOUCH CONTROL
The graphical display is shown
in (fi gures 1). As you see, the diameters
and thus the powers of heating elements
vary as shown in Table 1. Heating
elements are controlled by this control
unit with 9 positions. When supply
voltage is applied the hob control unit
carries out an automatic calibrat ion
procedure. The hob is thereafter in
stand-by mode.
All the heat zones are switched off
and t he display are not illum inated.
The desired heating element can
now be selected by using the 4,5,6 or
7 sensors for related heating elements
(see fi g. 1). Heat settings of the
selected heating element adjusted by
using the (-) sensor which is shown
as»3»in Figure 1 to reduce, (+) sensor
which is shown as «2» in Figure 1 to
increase the heat level.
There are 9 heat setting modes
starting from 1 to 9. «1» is the minimum
and «9» is the maximum mode.
You can see the suggested cookings
in Table 2.
When a heating element has been
switch off by means of on/off sensor, an
«H» appears on the illustrated display
to show that the heating element is still
hot for 30 minutes in order to avoid any
accident.
For the hobs included dual zone
heating elements.
Outer part of dual zone heating
element could not work separately.
There are two possibility, one is using
inner part of the heating and the other
one is using both. Inner part of it can
be activated by pushing related control
unit however to activate the whole
heating element, it is needed to push
related control unit for inner part fi rst
and then related control unit of outer
part.

6
TECHNICAL PASSPORT ENGLISH
Electric Hob
Power and dimensions of the cooking
zones
Diameter
(mm)
Heating
elements
Power
W
1 140 Radiant
"Hi-light" 1200
2180 Radiant
"Hi-light" 1800
3210 Radiant
"Hi-light" 2100
4270/210 Radiant Double
"Hi-light"
2400
5210/175 Radiant Double
"Hi-light"
2000
TABLE 2
Touch control
Heat settings
Possible
cookings
1To melt butter, chocolate
and else.
1-3
To heat small quantities of
liquid and to keep dishes
warm.
3-4
To heat foods. Thaw deep-
frozen foods, to cook fruits
and pulses.
4-5 Deep-frozen foods, to cook
fruits and pulses.
5-6 To cook meat, fi sh, pulses
with sauce.
6-7 To cook roast of meat, fi sh;
to cook steaks and eggs.
7-9 To fry with oil and to heat
big quantities of water.
Controller Types and Use
Control Panel
FA6VS02
1. On/off sensor
2. Heating level increment (+) sensor
3. Heating level decrement (-) sensor
4. Front left zone activation sensor
5. Rear left zone activation sensor
6. Rear right zone activation sensor
7. Front right zone activation sensor
8. Led for secondary zone at rear left
9. Heating level indicator
10. Timer displays
FIG. 1
TABLE 1

7
ENGLISH TECHNICAL PASSPORT
Electric Hob
BASIC FUNCTIONS
Children’s safety
Switching on the child
safety locks
To activate the child safety feature;
switch on the Touch Control. Press and
hold the front left cooking zone.
After this press the MINUS button
(3) for 2 seconds. An «L» standing for
LOCKED (child safety feature preventing
unintended switch on) will be indicated
on all displays. If a cooking zone is in
«hot» mode, «L» and «H» is going to be
alternately displayed.
Switching off the child
safety locks
Follow the same process with
activation off child lock.
Heat-up Function (A Mode)
This feature enables you to set the
start time for rapid cooking. The touch
control pre-programs the selected hot
plate to full power you have chosen
after a certain length of time. Length of
time as second is shown in Table 3 for
each zone.
Activating Heat-up Function
Select the heating Level 9 and then
press PLUS button. A and 9  ash on
display alternately. Now use the MINUS
button to select constant cooking level
you want.
Example: You want to cook at heating
Level 6 and begin with rapid heating.
Select Level 9, press PLUS button again
and the heating level indicator will
 ash on and off, alternating between 9
and A, then decrease it to Level 6 using
sensor MINUS button. The system will
keep the hotplate at Level 9 (full power)
for 2,5 minutes ( 150 seconds in Table3),
 ashing on and off alternately between
6 and A, then (after 2,5 minutes) it will
automatically decrease to constant
cooking level 6.
To change the constant cooking
level, While  ashing A and constant
Level, Select the new constant cooking
level.
Deactivating Heat-up Function
To deactivate the heat up function,
after selecting the heating zone press
MINUS button.
Double Zone Button
Press the left rear heating zone
button twice.
Max operating times are shown
TABLE 3 for every heating levels.
Heating
level
Max.
operating
time (h)
Heat up
function (sec)
0 0 0
U20
1 6 60
26 180
3 5 288
4 5 390
5 4 510
6 1,5 150
7 1,5 210
8 1,5 270
9 1,5 150
TABLE 3

8
TECHNICAL PASSPORT ENGLISH
Electric Hob
Keep Warm Function – U Mode
Keep warm function is located
between level 0 and level 1. It is Shown
by «U». To enable this function, set the
heating level to 1 and press MINUS
button.
Fast Switch Off
The cooking zone button and
«MINUS» button are pressed at the
same time.
Timer Function With Switch Off
Activate the cooking zone that you
want to set time. Press «+» and «-»
buttons at the same time. «00» will
appear on the timer display. Time (in
minutes) is adjusted by pressing «+»
button to increase or «-» button to
decrease. To cancel the timer, select
related cooking zone and activating the
timer by pressing «+» and «-» buttons of
the same time. Later press and hold the
«-» button untill you see the «00» on
timer displays.
Timer function without
switch off
After switching on the touch control,
before selecting any cooking zone, press
«+» and «-» buttons at the same time.
«00» will ash on timer displays. Adjust
the timer (in minutes) by pressing «+»
or «-» buttons. When the countdown
reaches «00», you will the hear the
alarm. None of the heating elements are
switched off.
Fast Switch off Function
When cooking zone is active, ‘’+’’ and
‘’-’’ buttons are pressed at the same time.
Cooking zone heating level is going to
be ‘’0’’
Child Lock
To activate the child lock, pres the ‘’-’’
and front left cooking zone buttons at
the same time. After beep sound press
the front left cooking zone button, ‘’L’’ is
shown all displays.
To cancel the this function, press the
‘’-’’ and front left cooking zone button. So,
You temprorarily disabled the child lock.
This means when the hob re opened,
the child lock is re activated.
To cancel this function permanently,
press ‘’-’’ and front left cooking zone
button. After beep sound press the
MINUS button again. TC switch off
automatically. When the hob is re
pened,.the child lock is inactive.
Double zone selecting
After adjusting the heating element
to desire cooking level, press the double
zone button to activate or de activate.
Max operating times are shown
TABLE 4 for every heating levels.

9
ENGLISH TECHNICAL PASSPORT
Electric Hob
Power
level Max. operating time (h)
0 0
1 6
26
3 5
4 5
5 4
6 1.5
7 1,5
8 1,5
9 1.5
TABLE 4
CLEANING
Before any cleaning operation,
switch off the appliance.
It is very important to clean the
surface soon after every use, when the
glass is still tep id.
Do not use metallic sponges, powder
abrasives or corrosive sprays.
Depending on the dirty level we
recommend:
Slight stains: it is enought the use
of a m oist clean rag.
Burnt or soiling may be removed
with a special razor scraper (fi g. 5); be
aware that the razor can cause wounds.
Marks of liquid, over owed from
the pot, can be removed using vinegar or
lemon.
Pay attention not to let sugar
or sugary foods fall on the hob. In this
case switch off the hob and clean the
surfacewith hot water and razor scraper.
INSTALLATION
TECHNICAL INSTRUCTIONS FOR
THE INSTALLER
Installation, transformations and
maintenances listed below, may only be
carried out by a competent techn ician.
A wrong installation may provoke
damages to persons, animals or things,
for which the manufacturer can not be
responsible.
During the life of the unit, the
automatic safety or regulating devices
on the appliance may only be modifi ed
by the manufacturer or by his duly
authorized dealer.
After having cleared out all the
packing components, make sure of
the integrity of the appliance. In case
of doubt, do not use the appliance
and contact qualifi ed personnel.
After a period of time, metal re ex
andscratches may appear {fi g. 6) due to
the wrong cleaning and the wrong use
of the pots. The scratches are diffi cultly
removable, but they do not compromise
the good working of the hob.

10
TECHNICAL PASSPORT ENGLISH
Electric Hob
TABLE 5
COMPLY WITH THE
DIMENSIONS (in mm)
MODEL
Overall
dimensions of
hob
Cut out
dimensions of
kitchen unit
A in
mm
B in
mm
С in
mm
(±2 )
D in
mm (
±2 )
FA6VS02 517 587 480 560
INSTALLATION
FIXING
There is a special sealing washer
supplied with the hob. In order to avoid
any water infi ltration underneath the
hob. To fi x the s ealing washer, please
respect to following instructions:
1. Turnover the hob, take off the seal
from the guard. Correctly place the s
ealing washer «e»(fi g 9) under the hob.
Be sure to place the sealing washer
so that the external side ofthe sealing
washer fi ts together with the external
perimetrical edge of the hob. The ends
of the s e aling washer must fi t together
without overla pping.
2. Stick the sealing washer to the
hob uniformly. Presing it by fi ngers.
(Figure 9)
3. Place the hotplate in the openning
on the table
top.
4. Fix the hooks in the relative
accomodations of the body with the
screws F. (see Figure 8)
In order to avoid accidental touch
with the overheating bottom of the hob
during the working, is necessary to put
a wooden insert, fi xed by screws, at a
minimum distance of 70 mm from the
bottom of the hob ( see Fig. 11).
WARNINGS:
Be aware that the glue that join
the hob to the furniture, has to resist
to temperature higher than 150° C, to
avoid the unstuck of the panelling.
TECHNICAL DRAWINGS
FIG. 7
Please keep children away from all
packing elements ( carton, polystyrene,
nails,..).
Make a cutout in the worktop (in
Table 5), according to the d i m e n sions
indicated in fi g. 7; make sure that will
be respected the critical dimensions
between the hob, the lateral walls, the
back and the superior walls (see fi g. 7).