Landscape Forms Profile Area Light BW402 User manual

PROCEDURE FOR WIRING AREA LIGHTS:
The Profile Area Light is assembled at the factory. The light cartridge is mounted into the head of the pole and will
not need to be removed during installation. Do not remove light cartridge during installation.
The following schematic is to be used to connect the unit to line voltage. It is the responsibility of the installer to
make sure that all connections are made in accordance with the NEC and local building codes.
WARNING!: LED cartridge and driver are not rated for connection or disconnection while energized. Doing so may
damage LEDs and will void the warranty. Disconnect incoming power before making or breaking any electrical
connections.
INSTALLATION AND SERVICE SHOULD ONLY BE PERFORMED BY QUALIFIED PERSONNEL.
Installation Guide www.landscapeforms.com Ph: 800.521.2546
Page 1 of 5
Profile wiring diagrams for Area Light BW402 Date: August 15, 2022

Installation Guide www.landscapeforms.com Ph: 800.521.2546
Page 2 of 5
Date: August 15, 2022
BW402-A-NTW-NFL
BW402-A-NTW-FL
Profile wiring diagrams for Area Light BW402

Installation Guide www.landscapeforms.com Ph: 800.521.2546
Page 3 of 5
Date: August 15, 2022
BW402-A-TW-FL
BW402-A-TW-NFL
Profile wiring diagrams for Area Light BW402

Installation Guide www.landscapeforms.com Ph: 800.521.2546
Page 4 of 5
Date: August 15, 2022
BW402-B-NTW-FL
BW402-B-NTW-NFL
Profile wiring diagrams for Area Light BW402

Installation Guide www.landscapeforms.com Ph: 800.521.2546
Page 5 of 5
Date: August 15, 2022
BW402-B-TW-FL
BW402-B-TW-NFL
Profile wiring diagrams for Area Light BW402