Lantronix PremierWave 2050 User manual

Part Number 900-766-R
Revision C March 2017
PremierWave 2050
802.11ac Embedded Wi-Fi® Gateway
User Guide

PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 2
Intellectual Property
© 2017 Lantronix, Inc. All rights reserved. No part of the contents of this publication may be
transmitted or reproduced in any form or by any means without the written permission of Lantronix.
Lantronix and PremierWave are registered trademarks of Lantronix, Inc. in the United States and
other countries. DeviceInstaller is a trademark of Lantronix, Inc.
Patented: http://patents.lantronix.com; additional patents pending.
Wi-Fi is a registered trademark of the Wi-Fi Alliance Corporation. Windows and Internet Explorer
are registered trademarks of Microsoft Corporation. Mozilla and Firefox are registered trademarks
of the Mozilla Foundation. Chrome is a trademark of Google Inc. Safari is a registered trademark
of Apple Inc. Wi-Fi, Wi-Fi Direct, and Wi-Fi Alliance registered are trademarks of the Wi-Fi Alliance
Corporation. All other trademarks and trade names are the property of their respective holders.
Warranty
For details on the Lantronix warranty policy, please go to our web site at
www.lantronix.com/support/warranty.
Contacts
Lantronix, Inc.
7535 Irvine Center Drive
Suite 100
Irvine, CA 92618, USA
Toll Free: 800-526-8766
Phone: [phone]
Fax: [phone]
Technical Support Online: www.lantronix.com/support
Sales Offices
For a current list of our domestic and international sales offices, go to the Lantronix web site at
www.lantronix.com/about/contact.
Disclaimer
All information contained herein is provided “AS IS.” Lantronix undertakes no obligation to
update the information in this publication. Lantronix does not make, and specifically disclaims,
all warranties of any kind (express, implied or otherwise) regarding title, non-infringement, fitness,
quality, accuracy, completeness, usefulness, suitability or performance of the information provided
herein. Lantronix shall have no liability whatsoever to any user for any damages, losses and
causes of action (whether in contract or in tort or otherwise) in connection with the user’s access or
usage of any of the information or content contained herein. The information and specifications
contained in this document are subject to change without notice.

PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 3
Open Source Software
Some applications are Open Source software licensed under the Berkeley Software Distribution
(BSD) license, the GNU General Public License (GPL) as published by the Free Software
Foundation (FSF), and the Python Software Foundation (PSF) License Agreement for Python
2.7.6 (Python License). Lantronix grants you no right to receive source code to the Open Source
software. Your use of each Open Source component or software is subject to the terms of the
applicable license. The BSD license is available at http://opensource.org/licenses. The GNU
General Public License is available at http://www.gnu.org/licenses/. The Python License is
available at https://www.python.org/download/releases/2.7/license/.Your use of each Open
Source component or software is subject to the terms of the applicable license.
wpa_supplicant: http://w1.fi/cgit/hostap/plain/wpa_supplicant/README
Openssl : http://openssl.org/source/license.html
Busybox: http://busybox.net/license.html
Dropbear: https://secure.ucc.asn.au/hg/dropbear/raw-file/tip/LICENSE
VSFTPD: https://security.appspot.com/vsftpd.html#about
Bootstrap: https://github.com/twbs/bootstrap/blob/master/LICENSE
Python: https://www.python.org/download/releases/2.7/license/
Linux kernel version 3.10.0.
OPEN SOURCE SOFTWARE IS DISTRIBUTED WITHOUT ANY WARRANTY, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
SEE THE APPLICABLE LICENSE AGREEMENT FOR ADDITIONAL INFORMATION.
Revision History
Date Rev. Comments
February 2016 A Initial document for firmware release 1.0.0.0.
July 2016 B Updated for firmware release 1.0.0.1. Changes include adding Mode and
Channel Selection configuration options to Access Point, adding the
Transparent Mode option to Bridge, and adding the Band configuration
option to the Wireless Network section.
March 2017 C Updated to include PW20503 adapter board information.

PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 4
Table of Contents
Intellectual Property ________________________________________________________2
Warranty _________________________________________________________________2
Contacts _________________________________________________________________2
Disclaimer ________________________________________________________________2
Open Source Software ______________________________________________________3
Revision History ___________________________________________________________3
List of Figures _____________________________________________________________8
List of Tables _____________________________________________________________9
1: Using This Guide 11
Purpose and Audience _____________________________________________________11
Summary of Chapters ______________________________________________________11
Additional Documentation ___________________________________________________11
2: Introduction 13
Key Features _____________________________________________________________13
Applications ______________________________________________________________14
Protocol Support __________________________________________________________14
Troubleshooting Capabilities _________________________________________________15
Configuration Methods _____________________________________________________15
Addresses and Port Numbers ________________________________________________15
Hardware Address _____________________________________________________15
IP Address ___________________________________________________________16
Port Numbers _________________________________________________________16
Product Information Label ___________________________________________________16
3: Using DeviceInstaller 18
Installing DeviceInstaller ____________________________________________________18
Accessing the PremierWave 2050 Using DeviceInstaller ___________________________18
Next Step ____________________________________________________________20
4: Configuration Using Web Manager 21
Accessing Web Manager ___________________________________________________21
Status Page ______________________________________________________________22
Web Manager Components _________________________________________________23
Navigating Web Manager ___________________________________________________24

PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 5
5: Network Settings 26
Access Point _____________________________________________________________26
To View or Configure Access Point Settings _________________________________27
Bridge __________________________________________________________________28
Bridge Status and Configuration ___________________________________________28
To View or Configure Bridge Settings ______________________________________30
Wired (eth0) Network ______________________________________________________30
Interface Status and Configuration _________________________________________30
To Configure Network Interface Settings ____________________________________32
Link Status and Configuration ____________________________________________32
To Configure Network Link Settings ________________________________________32
Wireless (wlan0) Network ___________________________________________________33
Wireless (wlan0) Network Interface ________________________________________33
To View or Configure Wireless Network Interface Settings ______________________35
Wireless (wlan0) Network Link ____________________________________________35
To View or Configure Network Link Settings _________________________________36
Protocol Stack ____________________________________________________________36
IP Settings ___________________________________________________________36
To Configure IP Protocol Stack Settings ____________________________________36
ICMP Settings _________________________________________________________37
To Configure ICMP Protocol Stack Settings __________________________________37
ARP Settings _________________________________________________________37
To Configure ARP Network Stack Settings __________________________________37
Configuring VPN Settings ________________________________________________38
Wi-Fi Protected Setup ______________________________________________________38
To Initiate WPS ________________________________________________________38
To Show WPS Status ___________________________________________________39
WLAN Scan/QuickConnect __________________________________________________39
To View WLAN Link Scan and Status Information _____________________________40
WLAN Profiles ____________________________________________________________40
Configuring WLAN Profile Settings _________________________________________41
6: Diagnostics 44
DNS ____________________________________________________________________44
Accessing the DNS Settings ______________________________________________44
Hardware ________________________________________________________________45
To View Hardware Information ____________________________________________45
IP Sockets _______________________________________________________________45
To View the List of IP Sockets ____________________________________________45
Log ____________________________________________________________________46
To Configure the Diagnostic Log Output ____________________________________46
Memory _________________________________________________________________46

PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 6
To View Memory Usage _________________________________________________46
Ping ____________________________________________________________________46
To Ping a Remote Host _________________________________________________47
Processes _______________________________________________________________47
To View Process Information _____________________________________________47
Routes __________________________________________________________________47
Threads _________________________________________________________________48
To View Thread Information ______________________________________________48
Traceroute _______________________________________________________________48
To Perform a Traceroute ________________________________________________48
7: Administration 49
CLI _____________________________________________________________________49
CLI Status and Configuration _____________________________________________49
To View and Configure Basic CLI Settings ___________________________________50
Clock ___________________________________________________________________50
To Specify a Clock-Setting Method ________________________________________51
Discovery _______________________________________________________________51
To Configure Discovery _________________________________________________51
FTP ____________________________________________________________________52
To Configure FTP Settings _______________________________________________52
HTTP ___________________________________________________________________52
Interface Status, Configuration and Authentication ____________________________52
To View or Configure HTTP ______________________________________________53
To Configure HTTP Authentication _________________________________________54
Line ____________________________________________________________________54
Line Status and Configuration ____________________________________________55
To View and Configure Line Configuration and Command Mode _________________57
SSL ____________________________________________________________________57
Credentials ___________________________________________________________57
To Create a New Credential ______________________________________________57
To Delete a Credential __________________________________________________58
To Configure an SSL Credential to Use an Uploaded Certificate __________________59
To Configure an SSL Credential to Use a Self-Signed Certificate _________________60
Trusted Authorities _____________________________________________________60
To Upload an Authority Certificate _________________________________________60
CSR (Certificate Signing Request) _________________________________________61
Syslog __________________________________________________________________62
To Configure Syslog Settings _____________________________________________62
System _________________________________________________________________63
To access System settings: ______________________________________________64
Terminal ________________________________________________________________64
To Configure the Terminal Network Connection _______________________________65

PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 7
To Configure the Terminal Line or USB Connection ___________________________65
User Management _________________________________________________________67
To Change the User Admin Password ______________________________________67
XML ____________________________________________________________________67
To Export Configuration _________________________________________________68
To Export Status _______________________________________________________68
To Import Configuration _________________________________________________69
Quick Setup ______________________________________________________________70
To Utilize Quick Setup __________________________________________________71
A: Lantronix Technical Support 73

PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 8
List of Figures
Figure 2-1 PremierWave 2050 Usage Modes___________________________________________14
Figure 2-2 Product Label __________________________________________________________17
Figure 4-1 Status Page (Section 1 of 2) _______________________________________________22
Figure 4-2 Components of the Web Manager Page ______________________________________23
Figure 4-3 Expandable Menu Bar Selections ___________________________________________23
Figure 4-4 Expandable Menu Bar Selections ___________________________________________23

PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 9
List of Tables
Table 3-1 PremierWave 2050 Configuration in DeviceInstaller ___________________________ 19
Table 4-5 Web Manager Pages ____________________________________________________ 24
Table 5-1 Access Point Settings ____________________________________________________ 26
Table 5-2 Bridge Settings _________________________________________________________ 29
Table 5-3 Wired (eth0) Network Interface _____________________________________________ 30
Table 5-4 Link (eth0) Configuration__________________________________________________ 32
Table 5-5 Wireless (wlan0) Interface Configuration _____________________________________ 33
Table 5-6 Wireless (wlan0) Link Configuration _________________________________________ 35
Table 5-7 IP Protocol Stack Settings ________________________________________________ 36
Table 5-8 ICMP Protocol Stack Settings______________________________________________ 37
Table 5-9 ARP Protocol Stack Settings ______________________________________________ 37
Table 5-10 Wi-Fi Protected Setup___________________________________________________ 38
Table 5-11 WLAN Scan/Quick Connect Results________________________________________ 39
Table 5-12 WLAN Profiles_________________________________________________________ 40
Table 5-13 Individual WLAN Profile Settings __________________________________________ 41
Table 6-1 DNS Settings __________________________________________________________ 44
Table 6-2 Log Settings ___________________________________________________________ 46
Table 6-3 Ping Configuration ______________________________________________________ 47
Table 6-4 Traceroute Settings______________________________________________________ 48
Table 7-1 CLI Configuration Settings ________________________________________________ 49
Table 7-2 Clock Settings__________________________________________________________ 50
Table 7-3 Discovery Settings ______________________________________________________ 51
Table 7-4 FTP Settings ___________________________________________________________ 52
Table 7-5 HTTP Configuration _____________________________________________________ 52
Table 7-6 HTTP Authentication_____________________________________________________ 54
Table 7-7 Line Configuration Settings________________________________________________ 55
Table 7-8 Line Command Mode Setting ______________________________________________ 56
Table 7-9 Create New Keys _______________________________________________________ 57
Table 7-10 SSL Credential - Upload Certificate ________________________________________ 58
Table 7-11 SSL Credential - Create New Self-Signed Certificate___________________________ 59
Table 7-12 SSL Trusted Authority___________________________________________________ 60
Table 7-13 SSL CSR (Certificate Signing Request) _____________________________________ 61
Table 7-14 System Settings _______________________________________________________ 63
Table 7-15 Terminal on Network and Line Settings _____________________________________ 64
Table 7-16 Host Settings__________________________________________________________ 66

PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 10
Table 7-17 Configuration from Filesystem ____________________________________________ 70
Table 7-18 Line(s) from single line Settings on the Filesystem_____________________________ 70
Table 7-19 Bridge 1 (br0) Configuration ______________________________________________ 71
Table 7-20 Wi-Fi Protected Setup___________________________________________________ 71
Table 7-21 Current Configuration ___________________________________________________ 71
Table 7-22 Available Networks _____________________________________________________ 72

PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 11
1: Using This Guide
Purpose and Audience
This document provides information needed to configure, use, and update the Lantronix®
PremierWave® 2050 802.11ac embedded Wi-Fi® gateway. It is intended for software developers
and system integrators who are embedding this product into their designs.
Summary of Chapters
The remaining chapters in this guide include:
Additional Documentation
Visit the Lantronix Web site at www.lantronix.com/support/documentation for all the latest
Lantronix documentation including the following documents related to this product.
Chapter Description
2: Introduction Describes main features of the product and the protocols it supports.
Includes technical specifications.
3: Using DeviceInstaller Instructions for viewing the current configuration using the Lantronix
DeviceInstaller™application.
4: Configuration Using Web Manager Instructions for accessing Web Manager and using it to configure
settings for the device.
5: Network Settings Instructions to view and configure access point, bridge, wired
network, wireless network, protocol stack Wi-Fi protected setup,
WLAN Scan, QuickConnect, and WLAN Profiles settings.
6: Diagnostics Instructions to view and configure DNS, hardware, IP socket, log,
memory, ping, processes, routes, threads, and traceroute
information.
7: Administration Instructions to view and configure CLI, clock, discovery, FTP, HTTP,
line, SSL, syslog, system, terminal, user management, xml, and
quick setup information.
A: Lantronix Technical Support Instructions for contacting Lantronix Technical Support.
Document Description
PremierWave 2050 802.11ac
Embedded Wi-Fi Gateway
Command Reference
Instructions for accessing command mode (the command line
interface) using a Telnet connection, SSH connection or through
the serial port. Detailed information about the commands, XML
configuration, and status are provided.
PremierWave 2050 802.11ac
Embedded Wi-Fi Gateway
Evaluation Kit User Guide
Information needed to use the PremierWave 2050 802.11ac
embedded Wi-Fi gateway on the evaluation board.
PremierWave 2050 Evaluation Kit
Quick Start Guide
Instructions for getting the PremierWave 2050 evaluation kit up and
running.

1: Using This Guide
PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 12
PremierWave 2050 802.11ac
Embedded Wi-Fi Gateway
Integration Guide
Information about the PremierWave 2050 hardware and integrating
the unit into your product.
PremierWave 2050 802.11ac
Embedded Wi-Fi Gateway
Datasheet
Datasheet for the PremierWave 2050 gateway.
DeviceInstaller Utility Online Help Instructions for using the Windows® operating system-based utility
to locate the gateway and to view its current settings.
Com Port Redirectory Quick Start
and Online Help
Instructions for using the Windows operating system-based utility to
create virtual com ports.
Secure Com Port Redirector User
Guide
Instructions for using the Windows operating system-based utility to
create secure virtual com ports.
Document (continued) Description

PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 13
2: Introduction
The PremierWave 2050 gateway is a series of embedded gateways offering reliable and always-
on 5G (802.11ac) enterprise Wi-Fi connectivity for business critical applications.
With multiple host interfaces and production ready turnkey software and modular RF certification,
the PremierWave 2050 gateway accelerates the deployment and availability of simple and robust
WLAN connectivity for enterprise IoT products and solutions.
This integration of secure high performance Wi-Fi makes this very suitable for deployments within
the retail/point of service (POS), medical, logistics and warehousing applications as well as in
industrial instrumentation such as printers, weigh scales, and automation controllers.
Key Features
First industrial rated 802.11ac Wi-Fi module (2.4 GHz and 5 GHz)
Up to 433 Mbps (1x1 802.11ac) and up to 150 Mbps (802.11n) peak data rates
High performance embedded Ethernet to Wi-Fi bridge and router modes
Direct mobile to device service interface via SoftAP
Simultaneous AP and client (STA), AP only, client (STA) only modes
Frequency and band selection options in AP and client modes.
Enterprise Wi-Fi security (WPA2-Enterprise, EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST)
Integrated enterprise security and management features
10/100 Mbps Ethernet MAC/PHY (external magnetics and RJ45 required)
Ethernet, USB, serial (UARTs) – host interfaces
I2C, SPI, up to 13 GPIOs
Compact system-on-module SMT footprint (124 pin LGA 44.66 mm x 45.07 mm x 3.5 mm) or
through hole footprint (51.2 mm x 47 mm x 7.1 mm) for flexibility of integration
Antenna diversity with options for on-module antenna and external antenna
M2M/IoT expertise and world class support
Fully certified module mitigates regulatory risks
Wi-Fi Alliance® certified
Long term availability and modular footprint to protects investment
Operating temperature range: -40°C to +85°C
802.11 a/b/g/n wireless networking, dual band antennas, and WPS switch.

2: Introduction
PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 14
Applications
Home energy management systems
Medical device and clinical information system (CIS) integration
Asset and warehouse management
Mobile driven human-machine interface (HMI) and instrumentation
Industrial machines - weighing scales, automation controllers
Figure 2-1 PremierWave 2050 Usage Modes
Protocol Support
The PremierWave 2050 gateway contains a full-featured IP networking and wireless software
stack:
DHCP Client, DHCP Server, DHCPv6 Client
uPnP (Discovery), LCAP (77FE), Telnet, SSH, SSLv3/TLSv1, (S)FTP, HTTP(S)
IPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS, SNMP v2/v3
WPA/WPA2 Personal, WPA2 Enterprise (EAP-TLS, EAP-TTLS, EAP-PEAPv0/v1, EAP-
FAST)

2: Introduction
PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 15
Troubleshooting Capabilities
The PremierWave 2050 gateway offers a comprehensive diagnostic tool set that lets you
troubleshoot problems quickly and easily. Diagnostic tools available in the CLI or Web Manager
allow you to:
View critical hardware, memory, buffer pool, IP socket information and routing table
Perform ping and traceroute operations
Conduct forward or reverse DNS lookup operations
View all processes currently running on the PremierWave 2050 gateway including CPU
utilization
View system log messages
Configuration Methods
After installation, the PremierWave 2050 gateway requires configuration. For the unit to operate
correctly on a network, it must have a unique IP address on the network. There are four basic
methods for logging into the PremierWave 2050 gateway and assigning IP addresses and other
configurable settings:
Web Manager: View and configure all settings easily through a web browser using the
Lantronix Web Manager. See Chapter 4: Configuration Using Web Manager.
DeviceInstaller: Configure the IP address and related settings and view current settings on
the PremierWave 2050 gateway using a Graphical User Interface (GUI) on a PC attached to a
network. You will need the latest version of the Lantronix® DeviceInstaller™ utility.
See Chapter 3: Using DeviceInstaller.
Command Mode: Two methods for accessing Command Mode (CLI) include making a Telnet
or SSH connection, or connecting a PC or other host running a terminal emulation program to
the unit’s serial port. See the PremierWave 2050 802.11ac Embedded Wi-Fi Gateway
Command Reference for instructions and available commands.
XML: The PremierWave 2050 gateway supports XML-based configuration and setup records
that make device configuration transparent to users and administrators. XML is easily editable
with a standard text or XML editor. See the PremierWave 2050 802.11ac Embedded Wi-Fi
Gateway Command Reference for instructions and commands.
Addresses and Port Numbers
Hardware Address
The hardware address is also referred to as the Ethernet address, physical address, or MAC
address. The first three bytes of the Ethernet address are fixed and identify the unit as a Lantronix
product. The fourth, fifth, and sixth bytes are unique numbers assigned to each unit.
Sample ways hardware address may be represented:
00-80-A3-14-1B-18
00:80:A3:14:1B:18

2: Introduction
PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 16
IP Address
Every device connected to an IP network must have a unique IPv4 address. This address
references the specific unit.
Port Numbers
Every TCP connection and every UDP datagram is defined by a destination and source IP
address, and a destination and source port number. For example, a Telnet server commonly uses
TCP port number 23.
The following is a list of the default server port numbers running on the PremierWave 2050
gateway:
TCP Port 22: SSH Server (Command Mode configuration)
TCP Port 23: Telnet Server (Command Mode configuration)
TCP Port 80: HTTP (Web Manager Configuration)
TCP Port 21: FTP
TCP Port 443: HTTPS
UDP Port 30718: Lantronix Discovery Protocol
Product Information Label
The product information label on the gateway contains the following information about the specific
unit:
Model Name
Product Part Number
Barcode
Product Revision
Country of Manufacturing Origin
Serial Number
Manufacturing Date Code
China Regulatory ID (CMIIT)
Japan Telecommunication Mark (201-152843)
Regulatory ID (IC & FCC ID)
Regulatory Mark (CE0560)
Environmental Declaration (Halogen Free)
Environmental Compliance Marks (China RoHS and WEEE Mark)

2: Introduction
PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 17
Figure 2-2 Product Label

PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 18
3: Using DeviceInstaller
This chapter covers the steps for getting the PremierWave 2050 gateway online and for viewing its
current configuration though the Lantronix DeviceInstaller application. DeviceInstaller is a free
utility program that discovers, configures, upgrades, and manages Lantronix devices. It can be
downloaded from the Lantronix website at www.lantronix.com/support/downloads.
For instructions on using DeviceInstaller to configure the IP address and related settings or for
more advanced features, see the DeviceInstaller Online Help.
Note: Auto IP generates a random IP address in the range of 169.254.0.1 to
169.254.255.254, with a netmask of 255.255.0.0, if no BOOTP or DHCP server is found.
These addresses are not routable.
Installing DeviceInstaller
1. Download the latest version of Lantronix DeviceInstaller application from:
www.lantronix.com/support/downloads.
2. Run the executable to start the installation process.
3. Respond to the installation wizard prompts. (If prompted to select an installation type, select
Typical.)
Accessing the PremierWave 2050 Using DeviceInstaller
Note: Make note of the MAC address on your PremierWave 2050 gateway. It may be
needed to perform various functions in the DeviceInstaller application.
1. Click StartAll Programs Lantronix DeviceInstaller 4.4 DeviceInstaller.
2. When DeviceInstaller starts, it will perform a network device search. To perform another
search, click Search.
3. Expand the PremierWave folder by clicking the +symbol next to the folder icon. A list of
available Lantronix PremierWave 2050 gateways appears.
4. Select a PremierWave 2050 gateway by expanding its entry and clicking on its IP address to
view its configuration.
5. On the right page, click the Device Info tab. The current PremierWave 2050 configuration
appears. This is only a subset of the full configuration; the full configuration may be accessed
via Web Manager, CLI, or XML.

3: Using DeviceInstaller
PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 19
Table 3-1 PremierWave 2050 Configuration in DeviceInstaller
Current Settings Description
Name Configurable field. A name that identifies the PremierWave 2050 gateway.
The name field is blank by default. Double-click the field, type in the value, and
press Enter to complete. This name is not visible on other PCs or laptops
using DeviceInstaller.
DHCP Device Name Non-configurable field. Displays the name associated with PremierWave 2050
gateway’s current IP address, if the IP address was obtained dynamically.
To change the DHCP device name, see Chapter 4: Configuration Using Web
Manager or see the PremierWave 2050 802.11ac Embedded Wi-Fi Gateway
Command Reference available at www.lantronix.com/support/documentation.
Group Configurable field. A group name to categorize the PremierWave 2050
gateway. Double-click the field, type in the value, and press Enter to
complete. This group name is not visible on other PCs or laptops using
DeviceInstaller.
Comments Configurable field. Information about the PremierWave 2050 gateway. Double-
click the field, type in the value, and press Enter to complete. This description
or comment is not visible on other PCs or laptops using DeviceInstaller.
Device Family Non-configurable field. Displays the PremierWave 2050 gateways device family
as “PremierWave.”
Short Name Shows “PW2050” by default.
Long Name Shows “PremierWave 2050” by default.
Type Non-configurable field. Displays the device type as “PremierWave 2050.”
ID Non-configurable field. Displays the PremierWave 2050 gateway’s ID
embedded within th
e unit.
Hardware Address Non-configurable field. Displays the PremierWave 2050 gateway’s hardware (or
MAC) address.
Firmware Version Non-configurable field. Displays the firmware currently installed on the
PremierWave 2050 gateway.
Extended Firmware
Version
Non-configurable field. Displays the full version nomenclature of the firmware.
Online Status Non-configurable field. Displays the PremierWave 2050 gateway’s status as
Online, Offline, Unreachable (if the gateway is on a different subnet), or Busy
(the PremierWave 2050 gateway is currently performing a task.)
IPV6 Link Local Address Non-configurable field. Displays the PremierWave 2050 gateway’s current IPv6
address. To change the IPv6 address, click the Assign IP button on the
DeviceInstaller menu bar.
IPV6 Global Address Non-configurable field. Displays the PremierWave 2050 gateway’s global
address.
IP Address was
Obtained
Non-configurable field. Displays “Dynamically” if the PremierWave 2050
gateway automatically received an IP address (e.g., from DHCP). Displays
“Statistically” if the IP address was configured manually. If the IP address was
assigned dynamically, the following fields appear:
Obtain with DHCP with value of True or False
Obtain with BOOTP with value of True or False
Subnet Mask Non-configurable field. Displays the PremierWave 2050 gateway’s current
subnet mask. To change the subnet mask, click the Assign IP button on the
DeviceInstaller menu bar.

3: Using DeviceInstaller
PremierWave® 2050 802.11ac Embedded Wi-Fi® User Guide 20
Next Step
Now that the PremierWave 2050 gateway has an IP address and other initial settings, you can
configure it.
1. Double-click the unit in the list. Details about the unit display.
2. You have the following options:
To configure the unit using a Web browser, click the Web Configuration tab. The Lantronix
Web Manager window displays in your browser. Continue with
Chapter 4: Configuration Using Web Manager.
To configure the unit using a Telnet session, click the Telnet Configuration tab. The Setup
Mode window displays. See the PremierWave 2050 802.11ac Embedded Wi-Fi Gateway
Command Reference (available at www.lantronix.com/support/documentation) for
directions on configuring the PremierWave 2050 gateway using Command Line Interface
(CLI) and/or Extensible Markup Language (XML).
Gateway Non-configurable field. Displays the PremierWave 2050 gateway’s current
gateway. To change the default gateway, click the Assign IP button on the
DeviceInstaller menu bar.
Interfaces Non-configurable field. Displays the status of the wired (eth0)and wireless
(wlan0) interfaces. Click the plus icon to expand eth0or wlan and see specific
interfaces organized beneath each.
Number of Serial Ports Non-configurable field. Displays the number of serial ports on the PremierWave
2050 gateway.
Supports Configurable
Pins
Non-configurable field. Displays False.
Supports Email Triggers Non-configurable field. Displays False.
Telnet Supported Non-configurable field. Indicates if Telnet sessions are permitted. Displays
True.
Telnet Port Non-configurable field. Displays the PremierWave 2050 gateway’s port for
Telnet sessions.
Web Port Non-configurable field. Displays the PremierWave 2050 gateway’s port for Web
Manager configuration.
Firmware Upgradable Non-configurable field. Displays True, indicating the PremierWave 2050
firmware is upgradable as newer version become available.
Current Settings Description