LaserLiner AutoCross Laser ACL 2 User manual

AutoCross Laser ACL 2
GB
D
NL
F
DK
E
Bedienungsanleitung
Operating instructions
Gebruiksaanwijzing
Betjeningsvejledning
Mode d´emploi
Instrucciones para su uso
Istruzioni d'uso
Instrukcja Obsługi
Käyttöohje
Instruções de uso
Инструкция
3-7
8-12
13-17
18-22
23-27
28-32
33-37
38-42
43-47
48-52
53-57
I
PL
FIN
8.031.96.02.1 / Rev.0507
P
RUS

AutoCross Laser ACL 2
2

AutoCross Laser ACL 2
ENGLISH8
Automatic crossline laser
The compact laser for indoor working; extremely easy to
operate. The entry-level crossline laser, laser wavelength
635 nm. Automatic alignment through pendulum system,
with 3°-6° self-levelling range, magnetically damped. The
magnetic base for tripod-mounted applications. The unit
can also be secured to the wall. With additional hand
receiver mode: this unit can be equipped with an optional
Laser receiver.
General safety instructions
Caution: Do not look directly into the beam. Lasers
must be kept out of reach of
children. Never intentionally aim
the device at people. This is a
quality laser measuring device
and is 100% factory adjusted within the stated tolerance.
For reasons of product liability, we must also draw your
attention to the following: Regularly check the calibration
before use, after transport and after extended periods of
storage. We also wish to point out that absolute
calibration is only possible in a specialist workshop.
Calibration by yourself is only approximate and the
accuracy of the calibration will depend on the care with
which you proceed.

Note:
This product is a precision instrument that must be
handled and treated with care. Avoid shocks and
impact. Always keep and carry in the case! Switch all
lasers off and secure the pendulum. For cleaning, use a
soft cloth and glass cleaner.
Warranty:
The warranty period is 2 years from the date of
purchase. The warranty covers all material or manu-
facturing defects occurring during this time. The
following are excluded from warranty: Damage due to
improper use (e.g. operation with wrong type of
current/voltage, connection to unsuitable power source,
fall onto hard surface, etc.) or improper storage, normal
wear and tear, and defects which only insignificantly
impair the value or suitability for use. Any tampering by
unauthorised persons will render this warranty void. In
the event that you need to claim warranty, please take
the complete device together with all information and
the invoice to one of our dealers or send it in to Umarex-
Laserliner.
LASER LIGHT
DO NOT LOOK INTO
THE BEAM!
CLASS 2 M LASER
EN60825-1:2003-10

9
ENGLISH
1Battery compartment
cover
2ON / OFF-Switch
Transport securing
device
3Thumbwheel
4Laser emitting window
51/4” nut (connection
to magnetical mount)
61/4" nut for con. to
camera tripod
7Magnets
8Slot for fixing strap
95/8” nut for
connection to
constrution tripod
10 Hand receiver mode
11 Indicator lamp
AutoCross Laser ACL 2
1
211
4
9
5
89
6
7
7
8
3
10

Note: For transport, the ACL 2P RX must always be
switched off with the transport securing device (2) so
as to protect device from damage.

10
AutoCross Laser ACL 2
ENGLISH
Inserting the batteries
Open the battery compartment (1) and insert the
batteries in accordance with the installation symbols,
ensuring the correct polarity. Close the cover.
Switch on
Switch the unit on. A cross line will be projected.
RX-Ready
This unit can be equipped with an optional Laser
receiver. With the laser receiver the laser lines can be
seen under all light conditions until a max. range of
50 m.

Note: If the device is positioned too much out of level
(more than 3° or 6°), the laser will blink and an
acoustic warning signal will sound. Position the device
on a more level surface.

Note:
Regularly check the calibration before use, after
transport and after extended periods of storage.
Technical Data
Automatic levelling side-side
range forward-backward +3°
+6°
Accuracy +3 mm / 10 m
Operating range (depending on
room illumination) 20 m
Power supply 3 x 1,5V AA /
ca. 48 h
laser wavelength 635 nm
Laser class 2M / < 5mW
Weight 0,5 kg
Operating temperature 0°C to +50°C
Storage temperature -10°C to
+ 70°C
Optional:
Working range Laserreceiver max. 50 m
Subject to technical changes without
notice 11/2006

11

Note: The light intensity of the laser lines is highest in
the middle and lessens towards the edges. The maxi-
mum range of the laser receiver therefore also changes
accordingly: Green LED max. 7 – 15 m, red LED max.
30 – 50 m.
Optional:
Working with the laser receiver RX 51
For levelling over longer distances or in conditions of
bright light, use the laser receiver RX 51. Switch on with
button D; control lamp A will light up.
IMPORTANT: Set the ACL 2 to hand receiver mode
(button 10). The laser lines will now pulsate with high
frequency (10 kHz), making the laser lines darker. The
laser receiver can detect these pulsating laser lines up to
a maximum distance of 50 m.
Now move the receiver field (F) of the laser receiver
through the laser lines upwards and downwards
(horizontal laser line) and/or sideways (vertical laser line)
until the centre LED (G) lights up. Now mark the
horizontal and/or vertical reference dimension.
Adjust the sensitivity of the laser receiver with button B.
Green LED (C) for close-range working up to max. 15 m,
red LED (C) for distance-range working up to max. 50 m.
The sound can be switched on or off with button E.
B
AC
DE
G
F
I
H
ENGLISH
AutoCross Laser ACL 2
A Power indicator
B Switch accuracy
short range / long range
C LED for accuracy
green / red
D ON / OFF switch
E Sound ON / OFF
F Receiver field for laser
beam
G LED’s for Laserindication
(front, side, backside)
H Universal mount
I Battery compartment
(backside)

ENGLISH
A1
A2
2.
1.
Preparing the calibration check:
It is possible for you to check the calibration of the laser.
To do this, position the device midway between 2 walls,
which must be at least 5 metres apart. Switch the device
on (indicator lamp 11 off). The best calibration results
are achieved if the device is mounted on a tripod.
1. Mark point A1 on the wall.
2. Turn the device through 180° and mark point A2.
You now have a horizontal reference between points
A1 and A2.

Note: If points A2 and A3 are more than 3 mm / 10 m
apart on either, the device is in need of calibration.
Contact your authorised dealer or else the UMAREX-
LASERLINER Service Department.
Testing accuracy of vertical line
Set up instrument about 5 m from a wall. Fix a plumb line
of 2.5 m length to the wall, using a plumb bob. Press
button V1 or V2 and bring laser line into coincidence with
the plumb line. Deviation between laser line and plummet
cord from top to bottom must not exceed ±1.5 mm.
Testing accuracy of horizontal line
Set up instrument about 5 m from a wall. Press buttons H
and V1. Mark laser cross on wall. Turn instrument until the
laser cross has moved about 2.5 m to the left side and
check if horizontal line is within
± 2 mm of laser cross marked
on wall. Repeat measurement
by turning instrument to the
right side.
AutoCross Laser ACL 2
Performing the calibration check:
3. Position the device as near as possible to the wall at
the height of point A1. Now adjust the device.
4. Turn the device through 180° and mark point A3.
The difference between points A2 and A3 is the
tolerance.
A3
A2
<3 mm / 10 m = OK
A3
A2
A2
A1
4.
3.
12
BC
2,5 m
<2 mm = OK

AutoCross Laser ACL 2
58
Optional
max. 50 m

www.laserliner.com
Zubehör (optional)
Accessories (optional)
Accessoires (optioneel)
Tilbehør (ekstra-udstyr)
Accessoires (en option)
Accesorios (opcional)
Accessori (optional)
Akcesoria (opcja)
Lisämahdollisuuksia
valinnaisvarusteilla
Acessórios (opcional)
Дополнительные принадлежности
GB
D
NL
DK
E
I
PL
FIN
Art.-Nr: 090.120
F
Art.-Nr: 080.29
max. ca. 330 cm
min. 57 cm max. 122 cm
max. 126 cm
P
RUS
RangeXtender RX 51 Set
Art.-Nr: 033.20-1
59

Service- und Versand-
Anschrift
Service- and Shipping
Address
Service- en
verzendadres
Service- og Postadresse
Livraison et expédition
Dirección de servicio y
de envío
Indirizzo di assistenza e
di spedizione
Serwis i sprzedaż
Service- og Postadresse
Endereço de serviço e
envio
Адрес службы
сервиса и для
отправки
GmbH & Co KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: [phone], Fax: -333
www.laserliner.com
Umarex GmbH & Co KG
– Laserliner –
Möhnestraße 149
59755 Arnsberg Germany
[email protected]
LASERSTRAHLUNG
NICHT IN DEN
STRAHL BLICKEN!
LASER KLASSE 2 M
EN60825-1:2003-10
AutoCross Laser ACL 2
GB
D
NL
F
DK
I
E
PL
FIN
P
RUS