LaserLiner GreenLine-Laser 2 P User manual

GreenLine-Laser 2 P
037.00.00A / Rev 01.06
GB
D
NL
F
DK
E
Bedienungsanleitung
Operating instructions
Gebruiksaanwijzing
Betjeningsvejledning
Mode d´emploi
Instrucciones para su uso
Istruzioni d'uso
Instrukcja Obsługi
Käyttöohje
Instruções de uso
I
PL
FIN
P
3-8
9-14
15-20
21-26
27-32
33-38
39-44
45-50
51-56
57-62

2
GreenLine-Laser 2 P

GreenLine-Laser 2 P
ENGLISH 9
Latest-generation green crossline laser – visible even in the
most unfavourable light conditions.
Crossline laser, 522-542 nm, with automatic alignment through magnetically
damped pendulum system, 3° self-levelling range. Green lasers are many times
more visible than customary red lasers. This allows applications over longer
distances and working in very bright ambient light conditions. Through the
rotatable housing, the lasers can be precisely positioned. The removable base
allows use either with or without a tripod. Precision: 2 mm/10 m. With
additional 650 nm plumb laser line.
Incl.: Base with adjustable feet, laser enhancement glasses (green), magnetic
target plate (green), charger, high-performance batteries and carrying case.
General safety instructions
Caution: Do not look directly into the beam. Lasers must be kept out of
reach of children. Never intentionally aim the device
at people. This is a quality laser measuring device
and is 100% factory adjusted within the stated
tolerance. For reasons of product liability, we must
also draw your attention to the following: Regularly check the calibration
before use, after transport and after extended periods of storage. We also
wish to point out that absolute calibration is only possible in a specialist
workshop. Calibration by yourself is only approximate and the accuracy of
the calibration will depend on the care with which you proceed.

Note: This product is a precision instrument that must be handled and
treated with care. Avoid shocks and impact. Always keep and carry in the
case! Switch all lasers off and secure the pendulum. For cleaning, use a soft
cloth and glass cleaner.
LASER LIGHT
DO NOT LOOK INTO
THE BEAM!
CLASS 2 M LASER
EN 60825-1:2001
Warranty:
The warranty period is 2 years from the date of purchase. The warranty
covers all material or manufacturing defects occurring during this time. The
following are excluded from warranty: Damage due to improper use (e.g.
operation with wrong type of current/voltage, connection to unsuitable
power source, fall onto hard surface, etc.) or improper storage, normal wear
and tear, and defects which only insignificantly impair the value or suitability
for use. Any tampering by unauthorised persons will render this warranty
void. In the event that you need to claim warranty, please take the complete
device together with all information and the invoice to one of our dealers or
send it in to Umarex-Laserliner.

GreenLine-Laser 2 P
ENGLISH10
1Window for vertical laser
line
2Window for horizontal
laser line
3On / Off switch
Transport securing
device
4Knob for precision
adjustment
5Base
6Adjustable feet
7Window for plumb
lasers
8Round vial for rough
adjustment
9Socket for mains
unit/charger
10 Battery compartment
11 Charging display
12 Control field for
activating the lasers
13 Laser / Battery charge
display
1
2
3
4
5
6
12
10
8
7
9
11

Note:
For transport, the GreenLine-Laser must always be switched off with the
transport securing device (3) so as to protect device from damage.
13

GreenLine-Laser 2 P
ENGLISH 11
Battery operation
The device can also be operated with
standard alkaline batteries (6 x type AA).
To do so, open the battery compartment
(10), remove the rechargeable batteries
and insert the new batteries as shown by
the symbols. Check for correct polarity.
Replace the cover. If the LED (13) blinks
constantly, the batteries must be
changed.

Note: If the device is too far off the horizontal (more than 3°), a warning
signal will sound and, if switched on, the lasers will blink. Align the device
using the adjustable feet or place on a more level surface. The round vial
(8) is provided as an aid to alignment.

Note: Do not expose batteries to excessive heat such as sunshine, fire, etc. Dry
batteries must not be recharged. Used batteries must not be disposed of as
household waste. Please take them to a collection point for used batteries or for
special waste. Ask your local authority for further details. Batteries with the
recycling symbol can also be returned to our dealerships or to our Technical
Service.
Charging the batteries:
• Fully charge the batteries before use.
• Plug the charger/mains adapter into the power socket and into socket (9).
• When LED (13) starts to blink, recharge the batteries.
Switching on: Turn the On/Off switch (3) to the right, thereby releasing the
transport securing device. The lasers can now be individually activated via the
control field (12).

GreenLine-Laser 2 P
ENGLISH12
Alignment
For approximate alignment, the upper part
of the device can be turned on the base.
Exact positioning can be done with the
adjusting knob (4). Because of the
adjustable feet (6), the device can also be
placed on surfaces which are not level.
Use with tripod
For easy use, the GreenLine-Laser can be
mounted on a tripod (5/8" thread). To do
this, the upper part must be removed from
the base.
Green laser technology
Unlike red lasers, green laser light can only be indirectly generated. Because
of the system, therefore, fluctuations may occur:
• Difference in brightness between horizontal and vertical laser line
• Different levels of line brightness between one device and another.
• The optimum operating temperature is 20°C. Outside of the working
temperature range of 0-40°C, green lasers become darker.
TIP: Before switching on the device, wait until it has had time to adjust to
the ambient temperature.
These fluctuations are excluded from claims.
4
6

GreenLine-Laser 2 P
ENGLISH 13
Technical data
Self-levelling range +3°
Precision line lasers +2 mm / 10 m
Precision plumb laser +4 mm / 10 m
Working range (depending on ambient brightness) ca. 30 m
Laser wavelength of line laser (green) 522 – 542 nm
Laser wavelength of plumb laser (red) 650 nm
Line laser / Laser output rating Classe 2 M / < 5 mW
Plumb laser / Laser output rating Classe 2 / < 1 mW
Rechargeable battery operating time /
Recharging time
ca. 8 h /
ca. 16 h
Battery operating time ca. 16 h / 6x Typ AA
Weight 1,9 kg
Operating temperature 0°C ... + 40°C
Storage temperature -10°C ... + 70°C
Order number 037.00.00 A
Subject to technical alterations 01/2006

Note:
Regularly check the calibration before use, after transport and after
extended periods of storage.

Information on precision:
Precision 2 mm / 10 m: Adjust the device using the adjusting screws
(6) in such a way that the bubble of the circular level (8) is exactly in
the middle.
Precision 3 mm / 10 m: Adjust so that the bubble of the circular level
is within the ring.

Checking the vertical line: Position the device about 5 m from a wall. Fix a
plumb bob with a line of 2.5 m length on the wall, making sure that the bob
can swing freely. Switch on the device and align the vertical laser to the plumb
line. The precision is within the specified tolerance if the deviation between the
laser line and the plumb line is not greater than ± 1.5 mm.
Checking the horizontal line:
Position the device about 5 m from a wall and
switch on the cross laser. Mark point B on the wall.
Turn the laser cross approx. 2.5 m to the right and
mark point C. Check whether the horizontal line
from point C is level with point B to within ± 2 mm.
Repeat the process by turning the laser to the left.
GreenLine-Laser 2 P
ENGLISH
14
Performing the calibration check:
3. Position the device as near as possible to the wall at the height of
point A1.
4. Turn the device
through 180° and
mark point A3. The
difference between
points A2 and A3 is
the tolerance.
Preparing the calibration check:
It is possible for you to check the calibration of the laser. To do this, position
the device midway between 2 walls, which must be at least 5 metres apart.
Switch the device on (Laser cross ON). The best calibration results are
achieved if the device is mounted on a tripod. 1. Mark point A1 on the wall.
2. Turn the device
through 180° and
mark point A2.
You now have a
horizontal reference
between points A1
and A2.
180°
180°
A1
A2
2.
1.

Note: If points A2 and A3 are more than 2 mm / 10 m, the device is in
need of calibration. Contact your authorised dealer or else the UMAREX-
LASERLINER Service Department.
BC
2,5 m
<2 mm = OK
A3
180°
180°
A2
A3
A2
A2
A1
4.
3.
<2 mm / 10 m = OK

GreenLine-Laser 2 P
Art.-Nr: 090.120
63
max. ca. 330 cm
Art.-Nr: 080.70
Art.-Nr: 080.30
75°
max. 165 cm
min. 95 cm max. 160 cm
www.laserliner.com
Zubehör (optional)
Accessories (optional)
Accessoires (optioneel)
Tilbehør (flere typer)
Accessoires (en option)
GB
D
NL
DK
E
I
PL
FIN
Accesorios (opcional)
Accessori (optional)
Akcesoria (opcja)
Lisämahdollisuuksia
valinnaisvarusteilla
Acessórios (opcional)
F
P
63

GmbH & Co KG
Donnerfeld 2
59757 Arnsberg, Germany
Tel.: [phone], Fax: -333
www.laserliner.com
Dirección de envío y de servicio
post-venta:
Telefon: [phone]
Fax [phone]
Indirizzo servizio manutenzione
- Indirizzo di spedizione
Telefono [phone]
Fax [phone]
Adres serwisu i wysyłki:
Telefon Serwisu+49 2932 638-300
Fax [phone]
Huolto- ja lähetysosoite:
Puhelin [phone]
Fax [phone]
Endereço de serviço e envio:
Telefone [phone]
Fax [phone]
Service- und Versand-Anschrift:
Service-Telefon [phone]
Fax [phone]
Service- and Shipping Address:
Service phone [phone]
Fax [phone]
Service- en verzendadres:
Servicetelefoon [phone]
Fax [phone]
Service- og Postadresse
Service-Telefon [phone]
Fax [phone]
Livraison et expédition:
Telefon: [phone]
Fax [phone]
Umarex GmbH & Co KG
– Laserliner –
Möhnestraße 149, 59755 Arnsberg, Germany
[email protected]
GB
D
NL
I
E
PL
DK
FIN
F
P
GreenLine-Laser 2 P
LASERSTRAHLUNG
NICHT IN DEN
STRAHL BLICKEN!
LASER KLASSE 2 M
EN 60825-1:2001