Arpa 8/22, 18/36 and 30/55 150W LED User’s Manual – 1.0
Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy
Tel. +39 0376 771 777 – fax +39 0376 772 140 – email info@ldr.it – web www.ldr.it
ENGLISH
Thank you for choosing Luci della Ribalta srl. We hope our products and services meet your expectations, but if this should this
not be the case, we kindly ask that you contact us directly to help us supply you and all our customers with better quality and
service. The product you purchased has been manufactured with maximum care and selected components, but should you,
for reasons beyond our control, have received it damaged, we kindly ask you to contact the dealer who supplied the product
to you. To help you in this casualty, a form is supplied at the end of this manual.
Carefully read user’s instructions before using this lighting unit
The instructions given below will ensure safe installation and usage of this product. User’s failure to comply with the
installation, operating, maintenance and safety procedures mentioned in this manual, as well as those generally applicable to
this lighting equipment, may cause the luminaire not to perform as expected.
Luci della Ribalta Srl accepts no liability for direct, indirect, incidental, special, or consequential damages resulting from the
customer’s failure to follow the installation, operating, maintenance and safety procedures in this manual or those generally
applicable to lighting equipment.
The limitation extends to damages for personal injury, property damage, loss of operation, loss of profits, loss of product or
loss of time, whether incurred in by the customer, the customer’s employees or a third part.
Apart from the instructions given in this manual, all relevant safety and health standards of the appropriate EU and local
Directives must be complied with
IMPORTANT: Read these user instructions before using this lighting unit
The instructions given here ensure a safe and correct usage of this product. A user’s failure to comply with the installation,
operating, maintenance and safety procedures mentioned in this manual, as well as those generally applicable to this lighting
equipment, may cause the luminaire not to perform as expected.
Luci della Ribalta accepts no liability for direct, indirect, incidental, special, or consequential damages resulting from the
customer’s failure to follow the installation, operating, maintenance and safety procedures in this manual or those generally
applicable to lighting equipment.
The limitation extends to damages for personal injury, property damage, loss of operations, loss of profits, loss of product or
loss of time, whether incurred in by the customer, the customer’s employees or a third party.
Apart from the instructions given on this manual, all relevant safety and health standards of the appropriate EU Directives
must be complied with.
IMPORTANT SAFETY NORMS
* Warning, high voltage ignition. Disconnect the unit from power before servicing
* This product features fan-assisted ventilation. Make sure you do dot cover the fans or obstruct the air flow at any one time.
* Make sure the fans are working correctly. Should you detect even the slightest malfunction, switch the luminaire off and
carry out the necessary servicing. Replace the fan if necessary.
* This product is rated IP 20 and is therefore designed for interior use only. For details on maximum ambient temperature,
minimum distance from flammable objects and tilt angle, please refer to what indicated on the product label.
* Repairing and replacement of any component of this product must be carried out exclusively by professional personnel in
conformity with the relevant safety and health standards and only with original Luci della Ribalta srl components.
* Replacement of any part of the wiring system must be carried out exclusively by professional personnel in compliance with
the original wiring diagram and with components identical to or compatible with those originally fitted.
* Installation of this product must be exclusively carried out by professional personnel in compliance with the safety norms in
force in the country where the product is used.
* Continuous mains power is required for this spotlight as an internal dimmer controls the intensity via DMX or local
rotary knob.
Use of a phase control dimmed mains supply may damage the internal electronics.
