LE11212AA
This pack is a connected accessory which requires you to buy and install the «... with
Netatmo» connected starter pack first.
Pack contents
Safety instructions
This product should be installed in compliance with installation rules, preferably by a qualified electrician. Incorrect installation and/or incorrect use can
lead to risk of electric shock or fire. Before carrying out the installation, read the instructions and take account of the product’s specific mounting location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the instructions. All Legrand products must be
opened and repaired exclusively by personnel trained and approved by Legrand. Any unauthorised opening or repair completely cancels all liabilities
and the rights to replacement and guarantees. Use only Legrand brand accessories.
Connected mobile power outlet
Frequency bands: 2.4 - 2.4835 GHz
Power level: < 100 mW
16 A - 230 V~
3680 W max
Before you start:
Connected mobile power outlet
0 648 40
x 1 x 1
or several
AND
AND/OR
x 1
or several
ON/OFF switch
button and LED
indicator
To control a power outlet, only use the following products:
Wireless switches (peripherals) for all control points (not
included in this pack)
Connected mobile power
outlet
Congure the connected mobile power outlet
Press the centre of the wireless master switch until
the indicator lights up in green, release and the
indicator will go off
*(not included in this pack)
Connect the connected mobile
power outlet
The indicator of the ON/OFF button on the connected mobile power outlet initially lights
up in red. Press the button until the indicator flashes in green, then wait for the indicator to
light up steady in green: configuration is complete.
Short press on the wireless master switch to finalise
the installation.
The indicator on the connected mobile power outlet
goes off.
Open the Legrand Home + Control application and
follow the instructions.
*
*
2
