LEGRAND HPM D643/WEC User manual

Wireless Door Bell - Comfort
Battery Operated
Cat. No. D643/WEC, D643/BPWEC
Instruction Manual
2
1
Features
Specificaton
Warranty
Legrand Australia warrants this product for a period of 3 years
from the date of purchase.
These goods come with guarantees that cannot be excluded
under the Australian and New Zealand Consumer Laws. You
are entitled to a replacement or a refund for a major failure
and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods
repaired if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
See the Warranty card enclosed with this product for further
details.
Customer Service
For all Customer Service and Technical Support
please call Monday to Friday during business hours.
02/2022
Legrand Australia
1300 369 777
www.hpm.com.au
Legrand New Zealand
0800 476 009
www.hpm.co.nz
ABN: 31 000 102 661
Please read all instructions carefully before installation and use.
LE11033AC
A. Speaker
B. Melody selection (15 melodies available)
C. Volume control
D. Additional transmitter pairing
E. Light indicator
F. Name Plate
G. Weatherproof button
■Radio Operating Range: 100 m free field
■Receiver Sound Power: 75 dB @ 1m
■Frequency Band: 433.05-434.79 MHz
■RF Power Level: < 10 mW
■Degree of Protection: IP44 (Transmitter), IP20 (Receiver)
■Receiver Installation: Wall mounted/Free standing
■Transmitter Installation: Wall mounted/Adhesive/Free standing
Battery requirement:
■Battery for transmitter:1 x 3 V (CR2032) lithium battery included
■Battery for receiver: 3 x 1.5 V AA batteries (not included)
Do not use rechargeable batteries.
Box contents:
■1 x Bell press
■1 x Door bell receiver
■3 x Wall plugs and 3 x Screws
■2 x Wall plugs and 2 x Screws
(D643/BPWEC only)
■ 2 x Double sided tape
■ 1 x 3 V CR2032 Lithium battery
(supplied)
■ Warranty Card
■ Instruction Manual
F
G
E
■Battery operated / Wireless operation
■Range 100m in free field
■15 melodies
■Name tag insert
■Speaker
■Easy to install - no wires or cables
■No signal interference for neighbours
■Can be used as a door bell or panic switch
1. Do not use rechargeable batteries, do not mix old and new batteries or different types. Alkaline
batterie are recommended in the receiver for a longer operating life. 2. The operation and range of
your wireless door bell depends on location, temperature and battery condition. 3. Do not expose
the unit to rain or immerse either unit in water. 4. Avoid locations where the bell press transmitter
is exposed to direct summer sunlight. 5. Do not leave exhausted batteries in door bell receiver
or bell press transmitter. 6. Clean only with a damp cloth and mild detergent. Do not use solvents.
6
7
Important Notes Before First Time Use
Product Notes
1. Suitable for indoor installation only. 2. Handle the door bell gently and carefully. Dropping it can
damage the circuit boards and can cause the door bell to work improperly. 3. Keep the door bell
away from dust and dirt, which can cause premature wear of parts. 4. Use only fresh batteries of the
recommended size and type. Always remove old or weak batteries. They can leak chemicals that can
destroy electronic circuits. 5. Modifying or tampering with the door bell’s internal components can cause a
malfunction and might invalidate its warranty. 6. This product contains no serviceable parts and no attempt
should be made to repair this product. If the product is faulty it should be discarded. 7. The material in this
product may vary in colour from batch to batch. Colour matching from one batch to another cannot be
guaranteed. 8. Legrand reserves the right to modify the specifications of this product at any time
another cannot be guaranteed. 9. This product utilises intellectual property in the form of registered
designs, trademarks, and/or patents. Such intellectual property remains the property of Legrand in all cases.
-20° C
+50° C
A
D
C
B
Warning
10
Paper
THIS PRODUCT CONTAINS A COIN BATTERY
If swallowed, a lithium coin battery can
cause severe or fatal injuries within 2 hours.
Keep batteries out of reach of children.
If you think batteries may have been
swallowed or placed inside any part of the
body, seek medical attention immediately.
!
WARNING
1. Ensure the device’s battery compartment is
secured with a screw provided. 2. Do not use if the
battery compartment is not secure. 3. Dispose
of used button/coin batteries immediately by
placing sticky tape around both sides of the
battery and dispose of it immediately in an outside
bin, out of reach of children, or recycle safely.

3
4
Before Installation
Installation
A. DOOR BELL RECEIVER
B. DOOR BELL TRANSMITTER
ADDITIONAL TRANSMITTER PAIRING
x 3 x 1
x 3
1. Wall mount with screws
1. Wall mount with screws
2. Free standing
Receiver
3. Free standing
2. With adhesive
5Operating Instructions
BATTERY REPLACEMENT
Transmitter
Ding
Ding
> 5 s
Ding Ding
Ding
1 x
or > 15 s
■Test the location of both units to ensure satisfactory operation before permanently fixing either unit in place.
■ Do not mount the bell press transmitter on metal or near a metal door frame, security door or in close
proximity to any metal outdoor furniture. The range of the unit may be substantially reduced.
■If using first time, pull out the plastic film
to activate the battery.
Battery cover must be fixed using
screws as shown.
TRANSMITTER UNPAIRING
1. Remove batteries of receiver.
2. Hold Receiver pairing button and load in batteries at the same time, and keep holding pairing
button till you hear ding dong. All transmitter pairing are cleared.